MBX8T

E0710 Mugen Seiki Aluminum Clutch Shoes (3) (Hard)

€37.60

VAT included

E0710 Mugen Seiki Aluminum Clutch Shoes (3) (Hard)

Buy Details

Add to basket View details  

C0601/1 Mugen Seiki 8x16x5mm Bearing (10)

€24.99

VAT included

C0601/1 Mugen Seiki 8x16x5mm Bearing (10)

Buy Details

Add to basket View details  

E0162 Mugen Front Upper Suspension Arm Shaft (2)

€6.35

VAT included

There are not enough products in stock

This is a set of replacement Mugen front upper suspension arm shafts, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Details

View details  

E0219 Mugen Seiki Self Locking Wheel Nut (4)

€19.75

VAT included

There are not enough products in stock

This is a set of four optional Mugen self locking wheel nuts and are intended for use with Mugen 1/8 scale off road vehicles.

Details

View details  

E0228 Mugen Front/Rear Differential Cup Outdrive (2)

€15.20

VAT included

Last items in stock

For use with the MBX6 and MBX7 family of vehicles. These outdrives are for use in both the front and rear differentials.  

Buy Details

Add to basket View details  

E0229 Mugen Center Differential Outdrive Cup

€15.85

VAT included

There are not enough products in stock

This is a set of replacement center differential cups for the Mugen MBX family of buggies.

Details

View details  

E0240 Mugen 1mm Wide Offset Wheel Hubs

€12.00

VAT included

This is a set of two Mugen 1mm wide offset wheel hubs and are intended for use with the Mugen MBX6 1/8 scale buggy.

Buy Details

Add to basket View details  

E0257 Mugen Seiki S5 Silicon O-Ring Set (10)

€7.35

VAT included

Last items in stock

This is a replacement Mugen S5 Silicon O-Ring Set, and is intended for use with the Mugen MBX family of vehicles.

Buy Details

Add to basket View details  

E0545 Mugen Seiki Damper End Set

€10.00

VAT included

This is a replacement Mugen Damper End Set, and is intended for use with the Mugen MBX family of 1/8 Scale vehicles. This set includes four shaft ends and four spring cups.

Buy Details

Add to basket View details  

E0546 Mugen Seiki Damper Cap Bushing (4)

€6.20

VAT included

This is a set of four replacement Mugen Damper Cap Bushings, and are intended for use with the Mugen MBX6 family of 1/8 Scale vehicles.

Buy Details

Add to basket View details  

E0554 Mugen Rear Damper Spring (Soft, 86mm, 10.5T) (2)

€15.55

VAT included

There are not enough products in stock

This is a set of two soft rear shock springs from Mugen and are intended for use with the Mugen MBX. These springs are 86mm in length, and have 10.5 Turns.

Details

View details  

E0555 Mugen Rear Damper Spring (Medium, 86mm, 10.25T) (2)

€12.75

VAT included

There are not enough products in stock

This is a set of two medium rear shock springs from Mugen and are intended for use with the Mugen MBX. These springs are 86mm in length, and have 10.25 Turns..

Details

View details  

E0556 Mugen Rear Damper Spring (Hard, 86mm, 10.0T) (2)

€15.55

VAT included

Last items in stock

This is a set of two hard rear shock springs from Mugen and are intended for use with the Mugen MBX. These springs are 86mm in length, and have 10 Turns.

Buy Details

Add to basket View details  

E0562 Mugen Rear Damper Spring (XX Soft, 86mm, 11.0T) (2)

€15.55

VAT included

Last items in stock

This is a set of two extra extra soft rear shock springs from Mugen. These springs are 86mm in length, and have 11 Turns.

Buy Details

Add to basket View details  

E0563 Mugen Rear Damper Spring (X Soft, 86mm, 10.75T) (2)

€15.55

VAT included

Last items in stock

This is a set of two extra soft rear shock springs from Mugen. These springs are 86mm in length, and have 10.75 Turns.

Buy Details

Add to basket View details  

E0575 Mugen B.Bore Rear Damper Spring Set (Medium - 1.5/8.50T) (2)

€16.50

VAT included

Last items in stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps. 

Buy Details

Add to basket View details  

E0576 Mugen Big Bore Rear Damper Spring Set (Hard - 1.5/8.25T) (2)

€16.50

VAT included

Last items in stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps. 

Buy Details

Add to basket View details  

E0577 Mugen Big Bore Rear Damper Spring Set (X Hard - 1.5/8.00T) (2)

€16.50

VAT included

There are not enough products in stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps. 

Details

View details  

E0578 Mugen Big Bore Rear Damper Spring Set (XX Hard - 1.5/7.75T) (2)

€16.50

VAT included

Last items in stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps. 

Buy Details

Add to basket View details  

E0582 Mugen Big Bore Rear Damper Spring Set (Soft - 1.5/8.75T) (2)

€16.50

VAT included

Last items in stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps. 

Buy Details

Add to basket View details  

E0601/1A Mugen Seiki 15x21x4mm Bearing (10)

€57.15

VAT included

Last items in stock

Mugen 15x21x4mm Bearing. Package includes ten rubber shielded bearings. 

Buy Details

Add to basket View details  

E0702 Mugen Seiki Nitro 3-Shoe Flywheel

€17.95

VAT included

Last items in stock

This is a replacement stock engine flywheel for the Mugen MBX family of buggies.

Buy Details

Add to basket View details  

E0803 Mugen Seiki Fuel Tank Bushing

€3.40

VAT included

Last items in stock

This is a set of replacement rubber fuel tank bushings for the Mugen MBX buggies and truggies. 

Buy Details

Add to basket View details  

E0811-B Mugen Seiki Rear Upper Arm Link (Long)

€5.90

VAT included

This is a the new optional long rear upper arm link that comes with the Mugen MBX buggy kits.

Buy Details

Add to basket View details  

E0813 Mugen Seiki Rear Upper Arm Link

€8.05

VAT included

This is the replacement rear upper arm link assembly ends for the Mugen MBX.

Buy Details

Add to basket View details  

E0814 Mugen Seiki Ball Link 7mm

€5.15

VAT included

This is a set of replacement plastic ball ends for the Mugen MBX truggy. These are used for the steering linkage and connect the front hubs to the steering ackerman

Buy Details

Add to basket View details  

E1068 Mugen Seiki Wing (White)

€17.40

VAT included

Last items in stock

This is an optional Mugen Seiki Lightweight High Down Force Wing. This wing is IFMAR legal and designed to provide high downforce, without the high CG's.

Buy Details

Add to basket View details  

E1069 Mugen Seiki Wing (Yellow)

€18.05

VAT included

Last items in stock

This is an optional Mugen Seiki Lightweight High Down Force Wing. This wing is IFMAR legal and designed to provide high downforce, without the high CG's.

Buy Details

Add to basket View details  

E1070 Mugen Seiki Wing (Black)

€17.40

VAT included

There are not enough products in stock

This is an optional Mugen Seiki Lightweight High Down Force Wing. This wing is IFMAR legal and designed to provide high downforce, without the high CG's.

Details

View details  

E2108 Mugen Seiki Complete Bushing Set

€13.90

VAT included

This is a replacement Mugen Complete Bushing Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. This complete set includes all of bushings used in the suspension mounts to adjust toe angle, kick-up and anti-squat on the vehicle. 

Buy Details

Add to basket View details  

E2116 Mugen Seiki Rear Hub Carrier Hinge Pin (2)

€16.90

VAT included

This is a pack of two replacement Mugen Rear Hub Carrier Hinge Pins, and are intended for use with the Mugen MBX 1/8 scale nitro buggy. These hinge pins secure the rear hub carrier to the rear arm. 

Buy Details

Add to basket View details  

E2119-A Machined Bushing "A" 4pcs (for E2134)

€22.54

VAT included

Last items in stock

Mugen Seiki Machined "A" Rear Hub Carrier Bushing Set. These bushings are compatible with MBX7 vehicles that are equipped with the optional Aluminum Universal Driveshaft Rear Hub Carriers (MUGE2134). 

Buy Details

Add to basket View details  

E2131 Mugen Seiki Rear Hub Carrier Set

€11.50

VAT included

There are not enough products in stock

These rear hub carriers has been modified to allow for use of an 8mm x 16mm ball bearing which is required for the redesigned MUGE2219 universal shaft. This hub carrier will also allow the use of the 15mm x 21mm ball bearing too. 

Details

View details  

E2139 Mugen Front Track Width Adj. Spacer (0.5mm) 4pcs

€6.35

VAT included

Last items in stock

This is a pack of four replacement Mugen 0.5mm Aluminum Front Track Width Spacers. 

Buy Details

Add to basket View details  

E2142 Mugen Seiki MBX8 Gearbox

€17.10

VAT included

Last items in stock

This is a replacement Mugen MBX8 Gear Box. This gearbox has been updated to allow you to remove and service the differential without detaching the suspension arm mounts.  

Buy Details

Add to basket View details  

E2143 Mugen Seiki MBX8 Center Differential Mount

€19.60

VAT included

Last items in stock

This is a replacement Mugen MBX8 Center Differential Mount. .  

Buy Details

Add to basket View details  

E2146 Mugen Seiki Non-Trailing Front Hub Carrier Set

€13.80

VAT included

Last items in stock

This is an optional Mugen Seiki Non-Trailing Front Hub Carrier Set, for use with the MBX7 family of buggies, trucks, and GT. Package includes one left and right side, as well as four inserts.

Buy Details

Add to basket View details  

E2147 Mugen 1.5mm Trailing Front Hub Carrier Set

€13.80

VAT included

This is an optional Mugen Seiki 1.5mm Trailing Front Hub Carrier Set that can be used with CVA (MUGE0221 & MUGE0224) and universal driveshaft on all the MBX family of buggies, trucks, and GT vehicles. Package includes one left and right side, as well as four inserts.

Buy Details

Add to basket View details  

E2148 Tension Rod, Body Mount, Front Upper Plate: X8/E, X8T/E

€20.40

VAT included

Last items in stock

This is a replacement Mugen MBX8 Body Mount and Front Upper Plate Set. 

Buy Details

Add to basket View details  

E2149 Mugen MBX8 Aluminum Front/Front Lower Arm Mount

€24.50

VAT included

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the front location.

Buy Details

Add to basket View details  

E2150 Mugen MBX8 Aluminum Front/Rear Lower Arm Mount

€24.50

VAT included

Last items in stock

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the rear location

Buy Details

Add to basket View details  

E2158 Mugen MBX8 Graphite Front Upper Steering Plate

€27.60

VAT included

Last items in stock

This is an optional Mugen MBX8 Graphite Front Upper Steering Plate, with two included Servo Saver Spacers and hardware. 

Buy Details

Add to basket View details  

E2161 Mugen Front Lower Suspension Arm L/R: X8T, X8TE

€21.50

VAT included

This is a replacement Mugen Front Lower Suspension Arm Set for use with the MBX8T and MBX8TE truggies. This set includes direction left and right side arms, with plastic arm inserts. 

Buy Details

Add to basket View details  

E2162 Mugen MBX8T/MBX8TE Rear Lower Suspension Arm Set

€29.90

VAT included

Last items in stock

This is a replacement Mugen Rear Lower Suspension Arm Set for use with the MBX8T and MBX8TE truggies. 

Buy Details

Add to basket View details  

E2163 Mugen F/R Tension Rods & Body Mounts: X8T, X8TE

€16.70

VAT included

There are not enough products in stock

This is a replacement Mugen Front/Rear Tension Rod Brace and Body Mount Set for use with the MBX8T and MBX8TE truggies. This set includes the front and rear chassis braces, as well as body mounts. 

Details

View details  

E2164 Mugen Front Upper Suspension Arm L/R :X8T, X8TE

€13.25

VAT included

Last items in stock

This is a replacement Mugen Front Upper Suspension Arm Set for use with the MBX8T and MBX8TE truggies. 

Buy Details

Add to basket View details  

E2166 Mugen Front Lower Arm Plate CFRP : X8T,X8TE

€29.50

VAT included

Last items in stock

Mugen MBX8T/MBX8TE Graphite Front Lower Suspension Arm Plates are a direct installation upgrade for the stock plastic arm plates included with the model. 

Buy Details

Add to basket View details  

E2167 Mugen Rear Lower Arm Plate CFRP :X8T, X8TE

€35.15

VAT included

There are not enough products in stock

Mugen MBX8T/MBX8TE Graphite Rear Lower Suspension Arm Plates are a direct installation upgrade for the stock plastic arm plates included with the model.

Details

View details  

E2168 Mugen Seiki Carbon Front Upright Arm (-3mm) (2)

€22.50

VAT included

The Mugen Carbon Front Upright Arms offer improved initial steering response, and makes the vehicle more stable through the middle and exit of the corner. They also help to reduce bump steer and make the vehicle more predictable in bumpy conditions.

Buy Details

Add to basket View details  

E2230 Mugen Front Central Universal Joint (82.5): X8T/E, X7TR/E

€26.72

VAT included

Last items in stock

This is an optional Mugen 82.5mm Front Center Universal Driveshaft.

Buy Details

Add to basket View details