MBX8T

C0265 Mugen Seiki 2.5x15.8mm Universal Joint Pin

€3.26

VAT included

This is a set of replacement joint pins for the universals used in the Mugen MBX5 buggies, and are used to hold the universal joint together and go through the axle shafts and the joint shaft. 

Buy Details

Add to basket View details  

E0803 Mugen Seiki Fuel Tank Bushing

€3.40

VAT included

Last items in stock

This is a set of replacement rubber fuel tank bushings for the Mugen MBX buggies and truggies. 

Buy Details

Add to basket View details  

E0705 Mugen Seiki Flywheel Washer/Spacers (4)

€3.80

VAT included

This is a set of four replacement Mugen Seiki Flywheel Washer/Spacers, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Buy Details

Add to basket View details  

C0107D Mugen Seiki Flanged Pivot Ball (4)

€3.47

VAT included

There are not enough products in stock

This is a set of small flanged pivot balls for Mugen cars, usually used for steering linkages.

Details

View details  

C0270 Mugen Seiki 3x12.8mm Joint Pin

€4.49

VAT included

This is a set of replacement joint pins for the universals used in the Mugen MBX5 buggies, and are used to hold the universal joint together and go through the axle shafts and the joint shaft. 

Buy Details

Add to basket View details  

E2807 Mugen Seiki Fuel Tank Nipple and Stopper Set

€4.59

VAT included

Last items in stock

This is a replacement Mugen Fuel Tank Nipple and Stopper Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. 

Buy Details

Add to basket View details  

C0264 Mugen Seiki Universal Joint Shaft

€4.60

VAT included

C0264 Mugen Seiki Universal Joint ShaftThis is a set of replacement joint shafts for the universals used in the Mugen MBX5 buggie

Buy Details

Add to basket View details  

C0801H Mugen Seiki Steering Rack Bushings (2)

€4.69

VAT included

This is a set of replacement steering rack bushings for the Mugen MBX5 family of buggies. These are the bushings that go into the steering ackerman plate, and connect the ackerman plate to the steering uprights.

Buy Details

Add to basket View details  

E2316 Mugen Seiki Servo Saver Spring (Hard)

€4.75

VAT included

Last items in stock

This is a replacement Mugen Servo Saver Spring. This "Hard" tension spring is the standard spring included with the MGT7 and MGT7E kits. 

Buy Details

Add to basket View details  

C0702B Mugen Seiki Flywheel Taper Cone

€4.90

VAT included

These are replacement 3x13.8mm joint pins for Mugen buggies and fits the MBX5 family of buggies.

Buy Details

Add to basket View details  

C0271 Mugen Seiki 3x13.8mm Joint Pin

€4.90

VAT included

These are replacement 3x13.8mm joint pins for Mugen buggies and fits the MBX5 family of buggies.

Buy Details

Add to basket View details  

E0155 Mugen Seiki Anti-Roll Bar Link (4)

€5.10

VAT included

Last items in stock

This is a set of replacement Mugen anti-roll bar links, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Buy Details

Add to basket View details  

E0814 Mugen Seiki Ball Link 7mm

€5.15

VAT included

This is a set of replacement plastic ball ends for the Mugen MBX truggy. These are used for the steering linkage and connect the front hubs to the steering ackerman

Buy Details

Add to basket View details  

H0471 Mugen Seiki Rear Body Mount Arm Pin (4)

€5.20

VAT included

This is a pack of four replacement Mugen Rear Body Mount Arm Pins, and are intended for use with the Mugen MRX5 and MRX4X 1/8 scale on road cars. 

Buy Details

Add to basket View details  

E2707 Mugen Seiki 0.8 Clutch Springs (4)

€5.30

VAT included

This is a pack of four replacement Mugen 0.8 Clutch Springs for use with the optional Mugen 4-Shoe Clutch System.

Buy Details

Add to basket View details  

E2708 Mugen Seiki 0.9 Clutch Springs (4)

€5.30

VAT included

This is a pack of four replacement Mugen 0.9 Clutch Springs for use with the optional Mugen 4-Shoe Clutch System.

Buy Details

Add to basket View details  

H2810 Mugen Seiki MBX8 Fuel Cap Silicone O-Ring (4)

€5.40

VAT included

There are not enough products in stock

This is a pack of four replacement Mugen MBX8 Fuel Cap Silicone O-Rings. 

Details

View details  

H0274 Mugen Seiki 2.5x11.8mm Roller Pin (10)

€5.65

VAT included

This is a pack of ten replacement Mugen 2.5x11.8mm Roller Pins, and are intended for use with the Mugen MRX4X 1/8 scale on road car.

Buy Details

Add to basket View details  

C0708A Mugen Seiki 1.0mm Clutch Spring Set (3)

€5.81

VAT included

Last items in stock

This is a set of stock 1.0mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.

Buy Details

Add to basket View details  

C0751 Mugen Seiki 0.9mm Clutch Spring Set (3)

€5.81

VAT included

This is a set of stock 0.9mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.

Buy Details

Add to basket View details  

C0753A Mugen Seiki 1.10mm 3-Shoe Clutch Spring Set (3)

€5.81

VAT included

This is a set of stock 1.1mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.

Buy Details

Add to basket View details  

E0811-B Mugen Seiki Rear Upper Arm Link (Long)

€5.90

VAT included

This is a the new optional long rear upper arm link that comes with the Mugen MBX buggy kits.

Buy Details

Add to basket View details  

E2803 Mugen Seiki Steering/Throttle Servo Horn & Parts Set

€5.90

VAT included

Last items in stock

This is a replacement Mugen Steering/Throttle Servo Horn & Parts Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. 

Buy Details

Add to basket View details  

E0236 Mugen Seiki Universal Joint Boots (2)

€5.90

VAT included

There are not enough products in stock

This is a set of two replacement Mugen universal joint boots, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Details

View details  

E0546 Mugen Seiki Damper Cap Bushing (4)

€6.20

VAT included

This is a set of four replacement Mugen Damper Cap Bushings, and are intended for use with the Mugen MBX6 family of 1/8 Scale vehicles.

Buy Details

Add to basket View details  

E2121-B Mugen Seiki Aluminum Servo Saver Spacer Set

€6.30

VAT included

Last items in stock

This is a replacement Mugen Aluminum Servo Saver Spacer Set. These are only compatible with the MBX7, when combined with the Mugen Carbon Fiber Upper Plate (MUGE2121).

Buy Details

Add to basket View details  

E2139 Mugen Front Track Width Adj. Spacer (0.5mm) 4pcs

€6.35

VAT included

Last items in stock

This is a pack of four replacement Mugen 0.5mm Aluminum Front Track Width Spacers. 

Buy Details

Add to basket View details  

E0162 Mugen Front Upper Suspension Arm Shaft (2)

€6.35

VAT included

There are not enough products in stock

This is a set of replacement Mugen front upper suspension arm shafts, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Details

View details  

E2115 Mugen Seiki Front Lower Arm Hinge Pin (2)

€6.35

VAT included

Last items in stock

This is a pack of two replacement Mugen Front Lower Arm Hinge Pins, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy. 

Buy Details

Add to basket View details  

E2712 Mugen Seiki Engine Mount Washer Set (4)

€6.35

VAT included

This is a pack of four replacement Mugen Engine Mount Washers for use with the MBX8 line of nitro vehicles. 

Buy Details

Add to basket View details  

E0161 Mugen Seiki Front Track Width Adjustment Spacer (4)

€6.40

VAT included

This is a set of replacement Mugen front track width adjustment spacers, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Buy Details

Add to basket View details  

E0210 Mugen Seiki 3x16.8 Wheel Hub Pins (8pc)

€6.55

VAT included

There are not enough products in stock

This is a pack of 8 3x16.8mm wheel hub pins for the Mugen MBX5 family of buggies. These are the small pins that are used to secure the wheel hubs to the axle drive shafts on the buggy.

Details

View details  

E2242 Mugen Seiki HTD S6 Silicon O-Ring (10)

€6.65

VAT included

This is a pack of ten replacement Mugen HTD S6 Silicon O-Rings for use with the HTD (High Traction Diff) Differentials

Buy Details

Add to basket View details  

copy of E2711 Mugen Seiki MBX8 Light Weight Clutch Bell (14T)

€7.10

VAT included

Last items in stock

This is an optional Mugen 14 Tooth MBX8 Light Weight Clutch Bell. This clutch bell features large cut-outs, reducing weight and improving heat dissipation.

Buy Details

Add to basket View details  

E0257 Mugen Seiki S5 Silicon O-Ring Set (10)

€7.35

VAT included

Last items in stock

This is a replacement Mugen S5 Silicon O-Ring Set, and is intended for use with the Mugen MBX family of vehicles.

Buy Details

Add to basket View details  

E0183 Mugen Seiki Rebound Stop Adjusting Screw

€7.60

VAT included

Last items in stock

This is a set of five replacement Mugen Seki rebound stop adjustment screws (droop screws) and are intended for use with the Mugen MBX6T 1/8 Truck.

Buy Details

Add to basket View details  

E2720 Mugen Seiki MBX8 Clutch Springs 0.9mm (4-shoe)

€7.75

VAT included

Last items in stock

E2720 Mugen Seiki MBX8 Clutch Springs 0.9mm (4-shoe)

Buy Details

Add to basket View details  

E2721 Mugen Seiki MBX8 Clutch Springs 0.95mm (4-shoe)

€7.75

VAT included

E2721 Mugen Seiki MBX8 Clutch Springs 0.95mm (4-shoe)

Buy Details

Add to basket View details  

E0813 Mugen Seiki Rear Upper Arm Link

€8.05

VAT included

This is the replacement rear upper arm link assembly ends for the Mugen MBX.

Buy Details

Add to basket View details  

E0135-B Mugen Seiki Suspension Arm Spacer Set

€8.05

VAT included

This is a replacement Mugen Suspension Arm Spacer Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Buy Details

Add to basket View details  

E0903 Mugen Seiki Spring Mounted Pipe Wire & Mount Set

€8.40

VAT included

Last items in stock

This is a replacement Mugen Spring Mounted Pipe Wire & Mount Set, and is intended for use with the Mugen MBX7 and MBX6R 1/8 buggy, but can also be used with the rest of the Mugen MBX family of vehicles as an optional upgrade.

Buy Details

Add to basket View details  

E2715 Mugen Seiki MBX8 Flywheel Nut (4-shoe)

€8.65

VAT included

Last items in stock

E2715 Mugen Seiki MBX8 Flywheel Nut (4-shoe)

Buy Details

Add to basket View details  

E2238 MUGEN SEIKI DIFF. GEAR 10T (4)

€8.90

VAT included

Buy Details

Add to basket View details  

E2804 Mugen Seiki Camber Link Pivot Ball (4)

€9.08

VAT included

There are not enough products in stock

This is a pack of four Mugen Camber Link Pivot Balls, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy. These pivot balls are used in the steering assembly and rear camber links. 

Details

View details  

E0718A Mugen Seiki 1.05mm Clutch Spring Set (3)

€9.10

VAT included

Last items in stock

This is a pack of three optional Mugen 1.05mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on. 

Buy Details

Add to basket View details  

E2421 Mugen Seiki MBX8 Front Bumper

€9.10

VAT included

This is a replacement Mugen MBX8 Front Bumper. 

Buy Details

Add to basket View details  

E2530 Mugen Seiki AS-018 O-Ring (10)

€9.10

VAT included

Last items in stock

This is a pack of ten replacement Mugen AS-018 O-Rings. 

Buy Details

Add to basket View details  

E0717A Mugen Seiki 0.95mm Clutch Spring Set (3)

€9.10

VAT included

This is a set of optional Mugen 0.95mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on.

Buy Details

Add to basket View details  

E2524 Mugen Seiki 16mm Diaphragm (4)

€9.50

VAT included

There are not enough products in stock

This is a pack of four replacement Mugen 16mm Diaphragms. 

Details

View details  

E2120 Mugen Seiki Rear Lower Arm Hinge Pin (2)

€9.50

VAT included

There are not enough products in stock

Mugen Seiki Machined "B" Rear Hub Carrier Bushing Set. These bushings are compatible with MBX7 vehicles that are equipped with the optional Aluminum Universal Driveshaft Rear Hub Carriers (MUGE2134).

Details

View details