TAMIYA KIT RC XM -01 Pro Chassis Kit 58738
New

TAMIYA KIT RC XM -01 Pro Chassis Kit 58738

Chassis Kit 1:10 RC XM -01 Pro 58738

This shaft-driven 4WD chassis kit (chassis size M) is another addition to the R/C rally range and has features such as three wheelbase types, new suspension components and a polycarbonate chassis cover. Add this chassis kit to your M-rally collection!

4WD mounting kit, XM-01 chassis,

3 different WB, chassis cover,

many Hop-Up parts included, Manual

€227.64
 Last items in stock
  • Secure Payment Guarantee.
Personal information encrypted and protected under the GDPR. Secure Payment Guarantee. Personal information encrypted and protected under the GDPR.
  • We deliver in Portugal, Europe and Brazil. We deliver in Portugal, Europe and Brazil.
  • Returns up to 14 days after receipt of your order. Returns up to 14 days after receipt of your order.

Description

Article number:58738

Product: 1:10 RC XM -01 Pro Chassis Kit

This shaft-driven 4WD chassis kit (M-chassis size) is another addition to the R/C rally line-up, and has features such as three types of wheelbase, new suspension components and a polycarbonate chassis cover. Add this chassis kit to your M-rally collection!

Compatible Hop-Up Option Parts for XM-01 Chassis (NOT included!)

22046: XV-02/TT-02 Ball Differential Set (39T)

22047: XV-02/TT-02 Front Direct Coupling Set (39T)

22048: XV-02 Slipper Clutch Set

22049: XV-02/TT-02 Oil Gear Differential Unit

22050: 06 Module Spur Gear (70T) for XV-02 Gear Differential

(Use with Item 22049 XV-02/TT-02 Oil Gear Differential Unit.)

22053: XV-02 Aluminum Spur Gear Holder

22055: XV-02 Aluminum Adjustable Suspension Mount (XH)

22056: XV-02 Aluminum Damper Stay Mount

22064: TT-02 Type-SRX Front Direct Cup Joints

(Use with Item 22046 XV-02/TT-02 Ball Differential Set (39T) or Item 22047 XV-02/TT-02 Front Direct

Coupling Set (39T).)

22072: XV-02 Aluminum Steering Arms (L/R)

54802: TB-05 Aluminum Steering Bridge

54884: Aluminum Adjustable Separate Suspension Mounts (A)

4WD assembly kit, XM-01 Chassis,

3-different WB, Chassis-Cover,

many Hop-Up parts included, Manual

WARNING!

Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.

When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.

Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).

Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

 

Warning! Not suitable for children under 14 years.

- This is a 1/10 scale R/C chassis assembly kit.

- Equipped with front mid-ship, longitudinal motor position.

- Changing rear section allows a choice from three wheelbases (short: 210mm, middle:225mm, long: 239mm).

- Bathtub frame chassis and polycarbonate chassis cover plus front inside polycarbonate cover and rear section are newly-molded parts. Mud guards helps prevent dirt and dust from getting inside.

- Caster angle can be set at 5 degrees by suspension mounts.

*For comparison, the XV-02 PRO chassis kit uses caster blocks which feature 6-degree caster angle.

(XV-01 chassis: 10-degree caster angle)

- The drivetrain employs oil-filled gear differential for front and rear.

- Comes with two 39T differential gears and one 40T differential gear for adjustment of front and rear drive

balance.

- Use 39T gear (w/15T gear) on the front and 40T gear (w/15T gear) on the rear for drive balance bias to front and vice-versa for drive balance bias to rear.

- It features a longitudinal upright battery pack position in the center-left for optimum balance.

- Front bumper with skid angle contributes to reduce surface contact.

- Aluminum dampers are employed at front and rear.

- M-Chassis 11-spoke racing wheels (Item 51394) are paired with 60D rally block tires (Item 51427).

- Front and rear universal drive shafts come as standard.

- Compatible with center diff setup and separately sold slipper clutch.

- Some Hop-Up Option parts for the XV-02 PRO chassis kit can be used.

- Low-profile servo is recommended. (Standard servo can be used, but it comes into contact with the front inside polycarbonate cover.)

- Please note that this chassis requires separately sold body, battery pack, motor and R/C equipment.

WARNING!

Read carefully and fully understand the instructions before commencing assembly. A supervising adult should also read the instructions if a child assembles the model.

When assembling this kit, tools including knives are used. Extra care should be taken to avoid personal injury.

Read and follow the instructions supplied with paints and/or cement, if used (not included in kit).

Keep out of reach of small children. Children must not be allowed to put any parts in their mouths, or pull vinyl bags over their heads.

Data sheet

58738
45 cm
30 cm
15 cm
2 Kg
1 Item

You might also like