FERRAMENTAS

Ferramentas para manutenção de Carros Telecomandados de pista on-road e todo terreno, destinados a Hobby e competição.

Mostre mais  

Filtros ativos

  • Disponibilidade: Não disponível
CHAVE 4 IN 1 CROSS WRENCH (7/17/8/10MM)
CHAVE 4 IN 1 CROSS WRENCH (7/17/8/10MM)
7,99 €
Com IVA
Não há produtos suficientes em stock
This is a UR cross wrench. This is one of the best wheel wrenches you can get for 1/8th scale buggies. You get a long glow plug wrench for quick changes, a buggy wheel nut wrench for tyre changes,  It has 7, 8, 10 & 17mm sockets.
Detalhes
Ver detalhes  
FLYWHEEL REMOVER WRENCH 12-21 PRO
FLYWHEEL REMOVER WRENCH 12-21 PRO
23,70 €
Com IVA
Não há produtos suficientes em stock
This is the updated Ultimate Racing Flywheel Remover .12-.21 Pro. By clamping the red anodized aluminum fork behind the flywheel and turning the shaft the flywheel is pulled away from the crankshaft, eliminating the need to use a hammer or other tools to loosen a tightly fitted flywheel.
Detalhes
Ver detalhes  
TURN BUCKLE WRENCH 4mm :MTC1
TURN BUCKLE WRENCH 4mm :MTC1
16,00 €
Com IVA
Não há produtos suficientes em stock
Aluminum turnbuckle and camber adjusting tool. A great tool to make easy fine tune adjustments for both front / rear camber links and steering arm tie-rods. Will fit a 4mm turnbuckle. 
Detalhes
Ver detalhes  
SkyRC Infrared Thermometer
SkyRC Infrared Thermometer
44,39 €
Com IVA
Não há produtos suficientes em stock
This is a non-contact infrared thermometer specifically designed for use with R/C engines, electronic speed controllers, motors, battery packs, battery chargers and etc.
Detalhes
Ver detalhes  
Temperature Tuning Screwdriver
Temperature Tuning Screwdriver
39,90 €
Com IVA
Não há produtos suficientes em stock
Non contact temp gauge measures -33 to 220 degrees. Special silicon ring ensures consistent positioning when checking engine temperature. Race designed screwdriver is long enough to reach small areas.
Detalhes
Ver detalhes  
B0545 Mugen Seiki Pinion Gear Tool
B0545 Mugen Seiki Pinion Gear Tool
49,40 €
Com IVA
Não há produtos suficientes em stock
The Mugen Pinion Gear Tool is a special tool developed for the installation and removal of the pinion gears from the clutch bell on the Mugen MRX and MGT7 series cars. Precision machined and lightweight, this tool is a must have for any serious racer. 
Detalhes
Ver detalhes  
FP2134 MIP Hex Driver Wrench 1.5mm (9007)
FP2134 MIP Hex Driver Wrench 1.5mm (9007)
17,50 €
Com IVA
Não há produtos suficientes em stock
This is an MIP 1.5mm Thorp Hex Driver. MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue.
Detalhes
Ver detalhes  
FP2135 MIP Hex Driver Wrench 2.0mm (9008)
FP2135 MIP Hex Driver Wrench 2.0mm (9008)
17,99 €
Com IVA
Não há produtos suficientes em stock
This is an MIP 2.0mm Thorp Hex Driver. MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue.
Detalhes
Ver detalhes  
FP2137 MIP Hex Driver Wrench 2.5mm Ball End (9010)
FP2137 MIP Hex Driver Wrench 2.5mm Ball End (9010)
17,99 €
Com IVA
Não há produtos suficientes em stock
This is the MIP 2.5mm ball end hex wrench with harden machined tip. MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue.
Detalhes
Ver detalhes