Peças Mugen MBX8ECOTE Nitro 1/8 Off Road

E0546 Mugen Seiki Damper Cap Bushing (4)

6,20 €

This is a set of four replacement Mugen Damper Cap Bushings, and are intended for use with the Mugen MBX6 family of 1/8 Scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0265 Mugen Seiki 2.5x15.8mm Universal Joint Pin

3,26 €

This is a set of replacement joint pins for the universals used in the Mugen MBX5 buggies, and are used to hold the universal joint together and go through the axle shafts and the joint shaft.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0271 Mugen Seiki 3x13.8mm Joint Pin

4,90 €

These are replacement 3x13.8mm joint pins for Mugen buggies and fits the MBX5 family of buggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0135-B Mugen Seiki Suspension Arm Spacer Set

8,05 €

This is a replacement Mugen Suspension Arm Spacer Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2108 Mugen Seiki Complete Bushing Set

13,90 €

This is a replacement Mugen Complete Bushing Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. This complete set includes all of bushings used in the suspension mounts to adjust toe angle, kick-up and anti-squat on the vehicle.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2242 Mugen Seiki HTD S6 Silicon O-Ring (10)

6,65 €

This is a pack of ten replacement Mugen HTD S6 Silicon O-Rings for use with the HTD (High Traction Diff) Differentials

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2149 Mugen MBX8 Aluminum Front/Front Lower Arm Mount

24,50 €

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the front location.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2144 Mugen MBX8 Front Lower Suspension Arm Set

19,60 €

This is a replacement Mugen MBX8 Front Lower Suspension Arm Set. This set also includes the plastic arm inserts, but no mounting hardware.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2168 Mugen Seiki Carbon Front Upright Arm (-3mm) (2)

22,50 €

The Mugen Carbon Front Upright Arms offer improved initial steering response, and makes the vehicle more stable through the middle and exit of the corner. They also help to reduce bump steer and make the vehicle more predictable in bumpy conditions.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2241 Mugen Seiki HTD Differential Gasket (10)

11,70 €

This is a pack of ten replacement Mugen HTD Differential Gaskets for use with the optional HTD (High Traction Diff) Differentials.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2173 Mugen Seiki Arm insert set MBX8

17,10 €

This is the Mugen MBX8 arm mount insert set

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2564 Mugen Seiki MBX8 Shock Retaining Pin (4)

12,65 €

This is a pack of four optional Mugen Seiki Big Bore Blank Shock Pistons. Create your own custom piston hole sizes with these blank pistons.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

16MM UR CONICAL SHOCK PISTONS GREEN (1.3MM X 7 ANGLED HOLES) - UR1715 (2PCS)

10,50 €

This is a pack of two optional Ultimate Racing 16mm Conical Shock Pistons. These pistons feature seven angled 1.3mm holes that help deliver smoother function during normal use but provide greater resistance on landings.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

16MM CONICAL SHOCK PISTONS YELLOW (1.2MM X 7 ANGLED HOLES) (2PCS) - UR1714

10,50 €

This is a pack of two optional Ultimate Racing 16mm Conical Shock Pistons. These pistons feature seven angled 1.2mm holes that help deliver smoother function during normal use but provide greater resistance on landings.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0545 Mugen Seiki Damper End Set

10,00 €

This is a replacement Mugen Damper End Set, and is intended for use with the Mugen MBX family of 1/8 Scale vehicles. This set includes four shaft ends and four spring cups.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0174 Mugen Seiki Washer Set

11,40 €

This is a set of replacement Mugen washers, and are intended for use with the Mugen MBX series 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0517 Mugen Seiki Front Shock Shaft (2)

11,70 €

This is a pack of two replacement front shock shafts for the Mugen MBX7 and MBX5T truggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2232 Mugen Seiki HTD Differential Case

12,90 €

This is a replacement Mugen Differential Case for use with the optional HTD (High Traction Diff) Differentials.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2116 Mugen Seiki Rear Hub Carrier Hinge Pin (2)

16,90 €

This is a pack of two replacement Mugen Rear Hub Carrier Hinge Pins, and are intended for use with the Mugen MBX 1/8 scale nitro buggy. These hinge pins secure the rear hub carrier to the rear arm.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2132 Mugen Front Upper Suspension Arm Set

13,70 €

These front upper suspension arms have been shortened 1.6mm in length. This will allow the use of the MUGE0161 spacer between the pillar ball and the upper arm. This will allow for the same camber on each side of the buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2237 Mugen Seiki HTD Differential Cup Outdrive (2)

19,15 €

This is a pack of two replacement Mugen HTD Differential Cup Outdrives for use with the optional HTD (High Traction Diff) Differentials.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2260 Mugen Seiki MBX8 Center Joint Cup

12,90 €

This is an optional Mugen MBX8 Center Joint Cup.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0161 Mugen Seiki Front Track Width Adjustment Spacer (4)

6,40 €

This is a set of replacement Mugen front track width adjustment spacers, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

FP2151 FP Aluminum One Piece Wing Button: MBX, Associated, Xray

14,99 €

FP2151 FP Aluminum One Piece Wing Button: MBX, Associated, Xray.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2262 Mugen Seiki MBX8 115mm Center Drive Shaft

12,80 €

Mugen MBX8 115mm Center Drive Shaft. This optional center dog bone eliminates friction and creates a more efficient drivetrain, increased acceleration and more traction compared to the stock universal driveshafts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0264 Mugen Seiki Universal Joint Shaft

4,60 €

C0264 Mugen Seiki Universal Joint ShaftThis is a set of replacement joint shafts for the universals used in the Mugen MBX5 buggie

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0710 Mugen Seiki Aluminum Clutch Shoes (3) (Hard)

37,60 €

E0710 Mugen Seiki Aluminum Clutch Shoes (3) (Hard)

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2516 Mugen Front Damper Spring 1.6 L70/9.25T: X8, X8T

15,99 €

Mugen Seiki 70mm Front Shock Spring Set (Soft - 1.6/9.25T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0270 Mugen Seiki 3x12.8mm Joint Pin

4,49 €

This is a set of replacement joint pins for the universals used in the Mugen MBX5 buggies, and are used to hold the universal joint together and go through the axle shafts and the joint shaft.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0601/1 Mugen Seiki 8x16x5mm Bearing (10)

24,99 €

C0601/1 Mugen Seiki 8x16x5mm Bearing (10)

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0811-B Mugen Seiki Rear Upper Arm Link (Long)

5,90 €

This is a the new optional long rear upper arm link that comes with the Mugen MBX buggy kits.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2238 Mugen Seiki MBX8 Diff. Gear 10T (4)

8,90 €

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0705 Mugen Seiki Flywheel Washer/Spacers (4)

3,80 €

This is a set of four replacement Mugen Seiki Flywheel Washer/Spacers, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0717A Mugen Seiki 0.95mm Clutch Spring Set (3)

9,10 €

This is a set of optional Mugen 0.95mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2156 Mugen 1mm MBX8 Graphite Rear Lower Arm Plate (2)

23,60 €

This is a pack of two optional Mugen 1mm MBX8 Graphite Rear Lower Arm Plates. These plates attach to the suspension arm to increase stiffness. Mounting hardware not included.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2138 Mugen Seiki 2.5mm Rear Anti-Roll Bar

12,50 €

This is an optional Mugen 2.5mm Rear Anti-Roll Bar.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2432 MUGEN CHASSIS X8R NITRO

100,50 €

E2432 MUGEN CHASSIS X8R NITRO

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2161 Mugen Front Lower Suspension Arm L/R: X8T, X8TE

21,50 €

This is a replacement Mugen Front Lower Suspension Arm Set for use with the MBX8T and MBX8TE truggies. This set includes direction left and right side arms, with plastic arm inserts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2219 Mugen Seiki Rear Universal Set

62,50 €

This is a replacement Mugen Rear Universal Set. These redesigned universal drive shafts are must be used with the MUGE2131 uprights and require a 8x16x5mm ball bearing. The length of the drive shaft is 89.5mm.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Mugen MBX8 REAR LOWER ARM MOUNT F -E2175

27,70 €

Mugen MBX8 REAR LOWER ARM MOUNT F -E2175

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2145 Mugen MBX8 Rear Lower Suspension Arm Set

16,90 €

This is a replacement Mugen MBX8 Rear Lower Suspension Arm Set. This set also includes the plastic arm inserts, but no mounting hardware.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0176 Mugen Seiki 2.6mm Rear Anti-Roll Bar

11,40 €

This is a Mugen 2.6mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2123 Mugen Seiki Steel Kingpin Balls (2)

21,50 €

This is a pack of two optional Mugen Steel Kingpin Balls. These kingpin balls are heavier than the stock parts, and eliminate the need for arm weights.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2147 Mugen 1.5mm Trailing Front Hub Carrier Set

13,80 €

This is an optional Mugen Seiki 1.5mm Trailing Front Hub Carrier Set that can be used with CVA (MUGE0221 & MUGE0224) and universal driveshaft on all the MBX family of buggies, trucks, and GT vehicles. Package includes one left and right side, as well as four inserts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2323 Mugen Seiki MBX8 ECO Radio Box & Battery Tray

25,00 €

This is a replacement Mugen MBX8 ECO Radio Box and Battery Tray Set.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0167 Mugen Seiki 2.6mm Front Anti-Roll Bar

11,30 €

This is a Mugen 2.6mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2124 Mugen Seiki Steel Kingpin Ball Adjusting Nut (2)

12,10 €

This is a pack of two optional Mugen Steel Kingpin Ball Adjusting Nuts. These nuts are heavier than the stock parts, and eliminate the need for arm weights.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0813 Mugen Seiki Rear Upper Arm Link

8,05 €

This is the replacement rear upper arm link assembly ends for the Mugen MBX.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2252 Mugen Seiki MBX8 Straight Cut Bevel Gear (12T)

17,10 €

This is an optional Mugen 12 Tooth MBX8 Straight Cut Bevel Gear.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0814 Mugen Seiki Ball Link 7mm

5,15 €

This is a set of replacement plastic ball ends for the Mugen MBX truggy. These are used for the steering linkage and connect the front hubs to the steering ackerman

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Menu

Carrinho de compras

Início

MBX8ECOTE

APOIO AO CLIENTE

LOJA HOBBY351 LISBOA