MBX7R E MODELOS ANTERIORES MBX6 , MBX5 .....

E2506 Mugen Seiki Rear Shock Boot (4)

11,70 €

This is a pack of four replacement Mugen Rear Shock Boots, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0546 Mugen Seiki Damper Cap Bushing (4)

6,20 €

This is a set of four replacement Mugen Damper Cap Bushings, and are intended for use with the Mugen MBX6 family of 1/8 Scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2721 Mugen Seiki MBX8 Clutch Springs 0.95mm (4-shoe)

7,75 €

This is an Mugen MBX8 Clutch Springs 0.95mm (4-shoe).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2505 Mugen Seiki Front Shock Boot (4)

11,70 €

This is a pack of four replacement Mugen Front Shock Boots, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0265 Mugen Seiki 2.5x15.8mm Universal Joint Pin

3,26 €

This is a set of replacement joint pins for the universals used in the Mugen MBX5 buggies, and are used to hold the universal joint together and go through the axle shafts and the joint shaft.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0135-B Mugen Seiki Suspension Arm Spacer Set

8,05 €

This is a replacement Mugen Suspension Arm Spacer Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0271 Mugen Seiki 3x13.8mm Joint Pin

4,90 €

These are replacement 3x13.8mm joint pins for Mugen buggies and fits the MBX5 family of buggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2108 Mugen Seiki Complete Bushing Set

13,90 €

This is a replacement Mugen Complete Bushing Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. This complete set includes all of bushings used in the suspension mounts to adjust toe angle, kick-up and anti-squat on the vehicle.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2149 Mugen MBX8 Aluminum Front/Front Lower Arm Mount

24,50 €

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the front location.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2805 Mugen Seiki Throttle Linkage Parts Set

10,30 €

This is a replacement Mugen Throttle Linkage Parts Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2421 Mugen Seiki MBX8 Front Bumper

9,10 €

This is a replacement Mugen MBX8 Front Bumper.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2718 Mugen Seiki ALUMI. CLUTCH SHOE (2)

23,15 €

E2718 Mugen Seiki ALUMI. CLUTCH SHOE (2)

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0545 Mugen Seiki Damper End Set

10,00 €

This is a replacement Mugen Damper End Set, and is intended for use with the Mugen MBX family of 1/8 Scale vehicles. This set includes four shaft ends and four spring cups.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2116 Mugen Seiki Rear Hub Carrier Hinge Pin (2)

16,90 €

This is a pack of two replacement Mugen Rear Hub Carrier Hinge Pins, and are intended for use with the Mugen MBX 1/8 scale nitro buggy. These hinge pins secure the rear hub carrier to the rear arm.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2103 Mugen Front Lower Suspension Arm Set (MBX7)

E2103-B Mugen Front Lower Suspension Arm Set (MBX7MBX8)

13,90 €

This is a replacement Mugen Front Lower Suspension Arm Set, and is intended for use with the Mugen MBX7 and MBX8 1/8 scale buggy. This set includes a left and right side lower arm.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0517 Mugen Seiki Front Shock Shaft (2)

11,70 €

This is a pack of two replacement front shock shafts for the Mugen MBX7 and MBX5T truggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2719 Mugen Seiki MBX8 Light Weight Clutch Bell (13T)

22,66 €

This is an optional Mugen 13 Tooth MBX8 Light Weight Clutch Bell. This clutch bell features large cut-outs, reducing weight and improving heat dissipation.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

MUGEN REAR WING MOUNT (+15) - E2429

13,70 €

MUGEN REAR WING MOUNT (+15) - E2429

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2702 Mugen Seiki Light Weight Clutch Bell (13T)

22,50 €

This is a replacement Mugen 13 Tooth Light Weight Clutch Bell. This clutch bell features reduced material to reduce weight and improve air flow.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2132 Mugen Front Upper Suspension Arm Set

13,70 €

These front upper suspension arms have been shortened 1.6mm in length. This will allow the use of the MUGE0161 spacer between the pillar ball and the upper arm. This will allow for the same camber on each side of the buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2310 Mugen Seiki Aluminum Servo Saver Arm

22,30 €

This is an optional Mugen Aluminum Servo Saver Arm, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0471 Mugen Seiki Rear Body Mount Arm Pin (4)

5,20 €

This is a pack of four replacement Mugen Rear Body Mount Arm Pins, and are intended for use with the Mugen MRX5 and MRX4X 1/8 scale on road cars.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0174 Mugen Seiki Washer Set

11,40 €

This is a set of replacement Mugen washers, and are intended for use with the Mugen MBX series 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0717A Mugen Seiki 0.95mm Clutch Spring Set (3)

9,10 €

This is a set of optional Mugen 0.95mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0751 Mugen Seiki 0.9mm Clutch Spring Set (3)

5,81 €

This is a set of stock 0.9mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0410 Mugen Seiki Front Bumper

8,45 €

This is a replacement front bumper for the Mugen MBX6 family of buggies. The front bumper is now reinforced.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2420 Mugen Seiki MBX7R Chassis Weight (40g)

21,75 €

This is an optional Mugen 40 Gram Chassis Weight. This weight mounts to the back of the front gearbox or in front of the rear gear box on the MBX7R and MBX7TR nitro vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2138 Mugen Seiki 2.5mm Rear Anti-Roll Bar

12,50 €

This is an optional Mugen 2.5mm Rear Anti-Roll Bar.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

FP2151 FP Aluminum One Piece Wing Button: MBX, Associated, Xray

14,99 €

FP2151 FP Aluminum One Piece Wing Button: MBX, Associated, Xray.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0811-B Mugen Seiki Rear Upper Arm Link (Long)

5,90 €

This is a the new optional long rear upper arm link that comes with the Mugen MBX buggy kits.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2516 Mugen Front Damper Spring 1.6 L70/9.25T: X8, X8T

15,99 €

Mugen Seiki 70mm Front Shock Spring Set (Soft - 1.6/9.25T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0270 Mugen Seiki 3x12.8mm Joint Pin

4,49 €

This is a set of replacement joint pins for the universals used in the Mugen MBX5 buggies, and are used to hold the universal joint together and go through the axle shafts and the joint shaft.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0161 Mugen Seiki Front Track Width Adjustment Spacer (4)

6,40 €

This is a set of replacement Mugen front track width adjustment spacers, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0702B Mugen Seiki Flywheel Taper Cone

4,90 €

These are replacement 3x13.8mm joint pins for Mugen buggies and fits the MBX5 family of buggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0238 Mugen Seiki 2.5x14.8mm Universal Joint Pin (4)

6,55 €

This is a set of four replacement Mugen 2.5x14.8mm Universal Joint Pins, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2717 Mugen Seiki MBX8 Clutch Pins (4-shoe)

10,69 €

This is an Mugen MBX8 Carbon Clutch Shoes (4-shoe)

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0705 Mugen Seiki Flywheel Washer/Spacers (4)

3,80 €

This is a set of four replacement Mugen Seiki Flywheel Washer/Spacers, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2572 Mugen Seiki Emulsion Damper cap (2)

29,40 €

This is a pack of two replacement Mugen 16mm Damper Caps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0176 Mugen Seiki 2.6mm Rear Anti-Roll Bar

11,40 €

This is a Mugen 2.6mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2147 Mugen 1.5mm Trailing Front Hub Carrier Set

13,80 €

This is an optional Mugen Seiki 1.5mm Trailing Front Hub Carrier Set that can be used with CVA (MUGE0221 & MUGE0224) and universal driveshaft on all the MBX family of buggies, trucks, and GT vehicles. Package includes one left and right side, as well as four inserts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0753A Mugen Seiki 1.10mm 3-Shoe Clutch Spring Set (3)

5,81 €

This is a set of stock 1.1mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2707 Mugen Seiki 0.8 Clutch Springs (4)

5,30 €

This is a pack of four replacement Mugen 0.8 Clutch Springs for use with the optional Mugen 4-Shoe Clutch System.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2137 Mugen Seiki 2.8mm Front Anti-Roll Bar

12,50 €

This is an optional Mugen 2.8mm Front Anti-Roll Bar. This bar is slightly thicker than the standard 2.7mm bar included with the MGT7 and MGT7E.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0167 Mugen Seiki 2.6mm Front Anti-Roll Bar

11,30 €

This is a Mugen 2.6mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2708 Mugen Seiki 0.9 Clutch Springs (4)

5,30 €

This is a pack of four replacement Mugen 0.9 Clutch Springs for use with the optional Mugen 4-Shoe Clutch System.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0801H Mugen Seiki Steering Rack Bushings (2)

4,69 €

This is a set of replacement steering rack bushings for the Mugen MBX5 family of buggies. These are the bushings that go into the steering ackerman plate, and connect the ackerman plate to the steering uprights.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2815 Mugen Seiki Aluminum Throttle Servo Horn

28,69 €

This is an optional Mugen Seiki Aluminum Throttle Servo Horn. This servo horn is made from high quality A7075 aluminum and provides a more direct brake feel.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes