Peças Mugen MBX8T Nitro 1/8 truggy Off road (2)

E2123 Mugen Seiki Steel Kingpin Balls (2)

21,50 €

This is a pack of two optional Mugen Steel Kingpin Balls. These kingpin balls are heavier than the stock parts, and eliminate the need for arm weights.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0813 Mugen Seiki Rear Upper Arm Link

8,05 €

This is the replacement rear upper arm link assembly ends for the Mugen MBX.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2147 Mugen 1.5mm Trailing Front Hub Carrier Set

13,80 €

This is an optional Mugen Seiki 1.5mm Trailing Front Hub Carrier Set that can be used with CVA (MUGE0221 & MUGE0224) and universal driveshaft on all the MBX family of buggies, trucks, and GT vehicles. Package includes one left and right side, as well as four inserts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2124 Mugen Seiki Steel Kingpin Ball Adjusting Nut (2)

12,10 €

This is a pack of two optional Mugen Steel Kingpin Ball Adjusting Nuts. These nuts are heavier than the stock parts, and eliminate the need for arm weights.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0274 Mugen Seiki 2.5x11.8mm Roller Pin (10)

5,65 €

This is a pack of ten replacement Mugen 2.5x11.8mm Roller Pins, and are intended for use with the Mugen MRX4X 1/8 scale on road car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2422 Mugen Seiki MBX8 1-Piece Wing Stay

14,75 €

This is the Mugen MBX8 1-Piece Wing Stay Set, including the wing stay, wing stay brace and four plastic wing buttons.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0167 Mugen Seiki 2.6mm Front Anti-Roll Bar

11,30 €

This is a Mugen 2.6mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Mugen MBX8 REAR LOWER ARM MOUNT F -E2175

27,70 €

Mugen MBX8 REAR LOWER ARM MOUNT F -E2175

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2707 Mugen Seiki 0.8 Clutch Springs (4)

5,30 €

This is a pack of four replacement Mugen 0.8 Clutch Springs for use with the optional Mugen 4-Shoe Clutch System.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2708 Mugen Seiki 0.9 Clutch Springs (4)

5,30 €

This is a pack of four replacement Mugen 0.9 Clutch Springs for use with the optional Mugen 4-Shoe Clutch System.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0753A Mugen Seiki 1.10mm 3-Shoe Clutch Spring Set (3)

5,81 €

This is a set of stock 1.1mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2137 Mugen Seiki 2.8mm Front Anti-Roll Bar

12,50 €

This is an optional Mugen 2.8mm Front Anti-Roll Bar. This bar is slightly thicker than the standard 2.7mm bar included with the MGT7 and MGT7E.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0517 Mugen Seiki Front Shock Shaft (2)

11,70 €

This is a pack of two replacement front shock shafts for the Mugen MBX7 and MBX5T truggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2242 Mugen Seiki HTD S6 Silicon O-Ring (10)

6,65 €

This is a pack of ten replacement Mugen HTD S6 Silicon O-Rings for use with the HTD (High Traction Diff) Differentials

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0801H Mugen Seiki Steering Rack Bushings (2)

4,69 €

This is a set of replacement steering rack bushings for the Mugen MBX5 family of buggies. These are the bushings that go into the steering ackerman plate, and connect the ackerman plate to the steering uprights.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2722 Mugen Seiki MBX8 Clutch Springs 1.0mm (4-shoe)

7,10 €

This is an Mugen MBX8 Clutch Springs 1.0mm (4-shoe).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2161 Mugen Front Lower Suspension Arm L/R: X8T, X8TE

21,50 €

This is a replacement Mugen Front Lower Suspension Arm Set for use with the MBX8T and MBX8TE truggies. This set includes direction left and right side arms, with plastic arm inserts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2263 Mugen Seiki MBX8T/MBX8TE Bevel Gear (10T)

17,10 €

Últimos artigos em stock

This is a replacement Mugen 10 Tooth Bevel Gear for use with the MBX8T and MBX8TE truggies. This bevel gear is used in the front and rear gearbox. .

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2301 Mugen Seiki Servo Saver Set

10,00 €

Últimos artigos em stock

This is a replacement Mugen Servo Saver Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2515 Mugen Front Damper Spring 1.6 L70/9.5T: X8, X8T

15,99 €

Últimos artigos em stock

Mugen Seiki 70mm Front Shock Spring Set (X Soft - 1.6/9.5T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2504 Mugen Seiki Shock End Steel Ball (4)

9,80 €

Últimos artigos em stock

This is a pack of four replacement Mugen Shock End Steel Balls, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy. These balls are directional. Be careful about the direction during installation.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

FLASH POINT 1/8 MIP BYPASS TUNING VALVES KIT FP18415

21,99 €

Últimos artigos em stock

This is a set of MIP tuning valves. There are 20 total pieces (4 of each color plus the gap pieces)

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0718A Mugen Seiki 1.05mm Clutch Spring Set (3)

9,10 €

Últimos artigos em stock

This is a pack of three optional Mugen 1.05mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0601/1A Mugen Seiki 15x21x4mm Bearing (10)

57,15 €

Últimos artigos em stock

Mugen 15x21x4mm Bearing. Package includes ten rubber shielded bearings.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2264 Mugen Seiki MBX8T/MBX8TE Conical Gear (46T)

59,80 €

Últimos artigos em stock

This is a replacement Mugen 46 Tooth Conical Gear for use with the MBX8T and MBX8TE truggies. This conical gear is used in the front and rear gearbox.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

ULTIMATE 16MM SHOCK BLADDERS (4)

8,21 €

Últimos artigos em stock

These are the new 16mm diameter Ultimate Racing shock absorber membranes compatible with major car brands such as: Mugen, Kyosho, Xray, Serpent, HB, Losi and others.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0257 Mugen Seiki S5 Silicon O-Ring Set (10)

7,35 €

Últimos artigos em stock

This is a replacement Mugen S5 Silicon O-Ring Set, and is intended for use with the Mugen MBX family of vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2164 Mugen Front Upper Suspension Arm L/R :X8T, X8TE

13,25 €

Últimos artigos em stock

This is a replacement Mugen Front Upper Suspension Arm Set for use with the MBX8T and MBX8TE truggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2267 Mugen Seiki Spur Gear 45T (HTD)

59,50 €

Últimos artigos em stock

E2267 Mugen Seiki Spur Gear 45T (HTD).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2303 Mugen Seiki Radio Tray Mount/Battery Holder Set

16,80 €

Últimos artigos em stock

This is a replacement Mugen Radio Tray Mount/Battery Holder Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2265 MUGEN F/ R DRIVE SHAFT TRUGGY

28,40 €

Últimos artigos em stock

E2265 MUGEN F/ R DRIVE SHAFT TRUGGY

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0175 Mugen Seiki 2.1mm Front Anti Sway Bar

11,30 €

Últimos artigos em stock

This is a Mugen 2.1mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2803 Mugen Seiki Steering/Throttle Servo Horn & Parts Set

5,90 €

Últimos artigos em stock

This is a replacement Mugen Steering/Throttle Servo Horn & Parts Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2143 Mugen Seiki MBX8 Center Differential Mount

19,60 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Center Differential Mount. .

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2317 Mugen Seiki MBX8 Enclosed Radio Box

16,70 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Enclosed Radio Box. This set includes the box and cover; no hardware.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0183 Mugen Seiki Rebound Stop Adjusting Screw

7,60 €

Últimos artigos em stock

This is a set of five replacement Mugen Seki rebound stop adjustment screws (droop screws) and are intended for use with the Mugen MBX6T 1/8 Truck.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0166 Mugen Seiki 2.5mm Front Anti-Roll Bar

11,30 €

Últimos artigos em stock

This is a Mugen 2.5mm Front Anti-Roll Bar, and is intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2320 Mugen Seiki MBX8 Clamping Servo Saver Spring Adjuster

13,75 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Clamping Servo Saver Spring Adjuster.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2706 Mugen Seiki Aluminum Clutch Shoes (4)

37,60 €

Últimos artigos em stock

This is a pack of four replacement Mugen Aluminum Clutch Shoes for use with the optional Mugen 4-Shoe Clutch System.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0225 Mugen Seiki Joint Cup

13,70 €

Últimos artigos em stock

This is a Mugen joint cup, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0814 Mugen Seiki Ball Link 7mm

5,15 €

Últimos artigos em stock

This is a set of replacement plastic ball ends for the Mugen MBX truggy. These are used for the steering linkage and connect the front hubs to the steering ackerman

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0243 Mugen Seiki Aluminum Joint Cup (2)

16,50 €

Últimos artigos em stock

This is a set of two optional Mugen aluminum front or rear axle shafts, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2136 Mugen Seiki 2.7mm Front Anti-Roll Bar

12,95 €

Últimos artigos em stock

This is a replacement Mugen 2.7mm Front Anti-Roll Bar. This bar came included as standard equipment with the MGT7 and MGT7E.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0168 Mugen Seiki 2.7mm Rear Anti-Roll Bar

11,40 €

Últimos artigos em stock

This is a Mugen 2.7mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Mugen Seiki Front Damper Spring (Hard, 75mm, 9.0T) (2)

11,00 €

Últimos artigos em stock

This is a set of two hard front shock springs from Mugen and are intended for use with the Mugen MBX6. These springs are 75mm in length, and have 9 Turns.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0319 Mugen Seiki Brake Pad (4)

41,20 €

Últimos artigos em stock

This is a set of four replacement Mugen Brake Pads, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0575 Mugen B.Bore Rear Damper Spring Set (Medium - 1.5/8.50T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2507 Mugen Front Shock Spring 1.5 L70/8.25T (1pr): X8, X8T

15,99 €

Últimos artigos em stock

This is an optional Mugen 70mm Front Shock Spring Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. These springs are 70mm in length and are made from 1.5mm wire. This 8.25T spring rate is slightly softer than the 8.0T front springs included with the MBX7.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2150 Mugen MBX8 Aluminum Front/Rear Lower Arm Mount

24,50 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the rear location

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0576 Mugen Big Bore Rear Damper Spring Set (Hard - 1.5/8.25T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Menu

Carrinho de compras

Início

APOIO AO CLIENTE

LOJA HOBBY351 LISBOA

Carrinho de compras