This is a replacement Mugen MBX8 Gear Box. This gearbox has been updated to allow you to remove and service the differential without detaching the suspension arm mounts.
This is a 50ml bottle of Mugen Silicone differential oil for 1/8th scale off road buggies (and some 1/10th scale on-road touring cars). The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds.
This is a set of replacement plastic ball ends for the Mugen MBX truggy. These are used for the steering linkage and connect the front hubs to the steering ackerman
For Ball differential's plates and ball. Hold tight between balls and plates. Ensures exact diff actions. ,Provides consistent performance under any weather condition.
This is a package of 5 Ultimate Racing 4mm aluminium arm pins stoppers. Made of aluminium 7075, which guarantee hi-resistance and durability, with double security screw
Perfect laptimer for RC racing. 500 laps recall, segregated memory and saved data can be uploaded to PC and printed. Comes supplied with lanyard, USB cable and required software.
This is a set of replacement clutch shims. This kit contains five 7x10x0.5 mm Stainless Steel shims. These adjstment shims are used for shimming 1/8th scale clutches.
Mugen Super Silicone 600 CST shock fluid formulated in Japan with high grade silicones. The bottle has a small pour spout with a screw on top for safe traveling. Bottle contains 50ml (1.7 oz).
Mugen Super Silicone 700 CST shock fluid formulated in Japan with high grade silicones. The bottle has a small pour spout with a screw on top for safe traveling. Bottle contains 50ml (1.7 oz).
This is a pack of two optional Mugen 10x15x4mm Low Friction Bearings. Low friction bearings are steel sealed and with oil lubrication (MUGK0603/1 bearing is rubber sealed and with grease lubrication).
Mugen Super Silicone 800 CST shock fluid formulated in Japan with high grade silicones. The bottle has a small pour spout with a screw on top for safe traveling. Bottle contains 50ml (1.7 oz).
This is a bottle of Lockfirm liquid from Mugen Seiki Racing. This liquid is used to secure any metal-to-metal screws from vibrating loose. Best preventative measure you can do to you car is to make sure screws are locktite'd down, so you can finish those long mains!