IGT8 PARTS CARBON FIBER FRONT BODY POST SUPPORT IGT800F21
18,75 €
Com IVA
Filtros ativos
- Disponibilidade: Disponível
E2242 Mugen Seiki HTD S6 Silicon O-Ring (10)
6,65 €
Com IVA
This is a pack of ten replacement Mugen HTD S6 Silicon O-Rings for use with the HTD (High Traction Diff) Differentials
E0238 Mugen Seiki 2.5x14.8mm Universal Joint Pin (4)
6,55 €
Com IVA
This is a set of four replacement Mugen 2.5x14.8mm Universal Joint Pins, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
B0524-1 Spare Tip for 2.0mm Hex Wrench
14,50 €
Com IVA
This is a replacement 2mm metric hex wrench tip from Mugen Seiki.
Hong Nor-Adjustable anti-roll bar ball end set-X3S-52
6,50 €
Com IVA
Hong Nor-Adjustable anti-roll bar ball end set-X3S-52
PS-44 TRANSLUCENT GREEN POLICARBONATE SPRAY 100ML TAMIYA
7,79 €
Com IVA
PS-44 Translucent Green Policarbonate Spray 100ml Tamiya These spray paints were especially developed for decorating transparent polycarbonate bodies used in R/C car modeling.
M3X12MM BUTTON HEAD SCREWS (10 PCS) ULTIMATE
2,99 €
Com IVA
This is a pack of ten Screws from Ultimate Racing. These are made of 12.9 steel which is the best grade you can use on your RC.
ENGINE NUT SG (1U.) FOR 1/8 SCALE
3,99 €
Com IVA
This is a replacement clutch nut (SG crankshaft) for the UR0603 standard 3 shoes competition flywheel as well as other 1/8 scale clutches. This nut threads onto the crankshaft to secure the flywheel, clutch assembly.
PS-08 LIGHT GREEN TAMIYA POLICARBONATE SPRAY 100ml 86008
8,50 €
Com IVA
Hong Nor -56T 2nd Spur Gear- HN-429C
7,60 €
Com IVA
Hong Nor -56T 2nd Spur Gear- HN-429C
H0855 Mugen Seiki Plastic Ball End
7,70 €
Com IVA
This is a pack of ten replacement plastic ball ends for Mugen buggies and trucks, and fits the Mugen MBX5 buggies as well as the MBX5T trucks.
SHOCK OIL SILICONE 8000 CPS (2OZ) ULTIMATE
4,98 €
Com IVA
This is a 60ml bottle of Ultimate Racing 8000 cSt silicone shock oil used with oil filled shocks.
H2121 Mugen Seiki Front Upright
6,75 €
Com IVA
This is a replacement Mugen Front Upright, and is intended for use with the Mugen MRX5. This upright can be used on either the Right or Left side of the car.
E2219 Mugen Seiki Rear Universal Set
62,50 €
Com IVA
This is a replacement Mugen Rear Universal Set. These redesigned universal drive shafts are must be used with the MUGE2131 uprights and require a 8x16x5mm ball bearing. The length of the drive shaft is 89.5mm.
GOLD CONNECTOR EC3 (1) SOCKETS YUKI MODEL AM-623-10F1
1,00 €
Com IVA
SHOCK OIL SILICONE 650 CPS (2OZ) ULTIMATE
4,98 €
Com IVA
This is a 60ml bottle of Ultimate Racing 650 cSt silicone shock oil used with oil filled shocks.
CARTEN Universal Shafts M210
13,00 €
Com IVA
Hong Nor -58T 2nd Spur Gear- HN-429D
7,40 €
Com IVA
Hong Nor -58T 2nd Spur Gear- HN-429D
PS-32 CORSA GREY TAMIYA POLICARBONATE SPRAY 100ml 86032
8,50 €
Com IVA
XRAY BALL-BEARING 13x19x4 RUBBER SEALED - GREASE (2) - 941319
9,00 €
Com IVA
BALL-BEARING 13x19x4 RUBBER SEALED - OIL (2) - 941319
E2422 Mugen Seiki MBX8 1-Piece Wing Stay
14,75 €
Com IVA
This is the Mugen MBX8 1-Piece Wing Stay Set, including the wing stay, wing stay brace and four plastic wing buttons.
B0753 SJG 3x5 F/H Screw
9,50 €
Com IVA
This is a pack of ten 3x5mm flat head screws from Mugen Seiki.
ROBITRONIC CA AKTIVATOR L-305
7,60 €
Com IVA
ROBITRONIC CA AKTIVATOR L-305
E0814 Mugen Seiki Ball Link 7mm
5,15 €
Com IVA
Últimos artigos em stock
This is a set of replacement plastic ball ends for the Mugen MBX truggy. These are used for the steering linkage and connect the front hubs to the steering ackerman
E0175 Mugen Seiki 2.1mm Front Anti Sway Bar
11,30 €
Com IVA
Últimos artigos em stock
This is a Mugen 2.1mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
Mugen Seiki Front Damper Spring (Hard, 75mm, 9.0T) (2)
11,00 €
Com IVA
Últimos artigos em stock
This is a set of two hard front shock springs from Mugen and are intended for use with the Mugen MBX6. These springs are 75mm in length, and have 9 Turns.
E2143 Mugen Seiki MBX8 Center Differential Mount
19,60 €
Com IVA
Últimos artigos em stock
This is a replacement Mugen MBX8 Center Differential Mount. .
E0183 Mugen Seiki Rebound Stop Adjusting Screw
7,60 €
Com IVA
Últimos artigos em stock
This is a set of five replacement Mugen Seki rebound stop adjustment screws (droop screws) and are intended for use with the Mugen MBX6T 1/8 Truck.
E2509 Mugen Front Shock Spring 1.5 L70/7.75T (1pr): X8, X8T
15,99 €
Com IVA
Últimos artigos em stock
Mugen Seiki 70mm Front Shock Spring Set (Hard - 1.5/7.75T) (2).
E0257 Mugen Seiki S5 Silicon O-Ring Set (10)
7,35 €
Com IVA
Últimos artigos em stock
This is a replacement Mugen S5 Silicon O-Ring Set, and is intended for use with the Mugen MBX family of vehicles.
E2515 Mugen Front Damper Spring 1.6 L70/9.5T: X8, X8T
15,99 €
Com IVA
Últimos artigos em stock
Mugen Seiki 70mm Front Shock Spring Set (X Soft - 1.6/9.5T) (2).
E0225 Mugen Seiki Joint Cup
13,70 €
Com IVA
Últimos artigos em stock
This is a Mugen joint cup, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
E0170 Mugen Seiki 2.9mm Rear Anti-Roll Bar
11,50 €
Com IVA
Últimos artigos em stock
This is a Mugen 2.9mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
E0243 Mugen Seiki Aluminum Joint Cup (2)
16,50 €
Com IVA
Últimos artigos em stock
This is a set of two optional Mugen aluminum front or rear axle shafts, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
OSSP CLUTCH SPRING 0.90(B) SOFT (4PCS)
4,21 €
Com IVA
E2150 Mugen MBX8 Aluminum Front/Rear Lower Arm Mount
24,50 €
Com IVA
Últimos artigos em stock
This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the rear location
E0319 Mugen Seiki Brake Pad (4)
41,20 €
Com IVA
Últimos artigos em stock
This is a set of four replacement Mugen Brake Pads, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.
E0575 Mugen B.Bore Rear Damper Spring Set (Medium - 1.5/8.50T) (2)
16,50 €
Com IVA
Últimos artigos em stock
This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.
E0576 Mugen Big Bore Rear Damper Spring Set (Hard - 1.5/8.25T) (2)
16,50 €
Com IVA
Últimos artigos em stock
This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.
Hong Nor-+2mm Wheel Hex Driver-X3S-15
7,40 €
Com IVA
Hong Nor-+2mm Wheel Hex Driver-X3S-15
PS-5 BLACK POLICARBONATE SPRAY 100ML TAMIYA
8,50 €
Com IVA
PS-5 Black Policarbonate Spray 100ml Tamiya These spray paints were especially developed for decorating transparent polycarbonate bodies used in R/C car modeling.
E2706 Mugen Seiki Aluminum Clutch Shoes (4)
37,60 €
Com IVA
Últimos artigos em stock
This is a pack of four replacement Mugen Aluminum Clutch Shoes for use with the optional Mugen 4-Shoe Clutch System.
B0325 Mugen Super Silicone Oil Shock 500 (50ml)
10,20 €
Com IVA
Mugen Super Silicone 500 CST shock fluid formulated in Japan with high grade silicones. The bottle has a small pour spout with a screw on top for safe traveling. Bottle contains 50ml (1.7 oz).
A2428 Mugen Seiki MTC2 ROUND WEIGHT 5g (1PC)
5,50 €
Com IVA
A2428 Mugen Seiki MTC2 ROUND WEIGHT 5g (1PC)
Hong Nor-Bearing 5x10x4- HN-A-47A
3,20 €
Com IVA
Hong Nor-Bearing 5x10x4- HN-A-47A
E2158 Mugen MBX8 Graphite Front Upper Steering Plate
27,60 €
Com IVA
Últimos artigos em stock
This is an optional Mugen MBX8 Graphite Front Upper Steering Plate, with two included Servo Saver Spacers and hardware.
E2507 Mugen Front Shock Spring 1.5 L70/8.25T (1pr): X8, X8T
15,99 €
Com IVA
Últimos artigos em stock
This is an optional Mugen 70mm Front Shock Spring Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. These springs are 70mm in length and are made from 1.5mm wire. This 8.25T spring rate is slightly softer than the 8.0T front springs included with the MBX7.
T2157B Aluminum Front Upper Arm Mount (L/R) 2pcs MTX7
8,55 €
Com IVA
T2157B Aluminum Front Upper Arm Mount (L/R) 2pcs: MTX7.
CARTEN Battery Holder
4,00 €
Com IVA