O.S. P3 Turbo Glow Plug "Ultra Hot"
€8.94
This is the O.S. P3 "Ultra Hot" Turbo Glow Plug.
Home
O.S. No.8 Short Body Standard Glow Plug "Medium"
€8.13
The O.S. #8 glow plug is the most widely used O.S. glow plug for O.S. engines.
TPRO 1/10 TC Racing Tire Pre-Mounted (4) - TP440236WH
€23.50
TPRO 1/10 TC Racing Tire Pre-Mounted - TP440236WH
Hong Nor X5B ( preorder )
€527.64
O.S. Exhaust Manifold Gasket (.12 to .18) (2) 21427200
€5.32
21427200 O.S. Exhaust Manifold Gasket (.12 to .18) (2)
O.S. RP6 Turbo Glow Plug "Medium"
€8.12
This is a O.S. Engines T-Series RP6 Medium Heat Range Turbo Glow Plug. This glow plug is ideal for .12-.21 size O.S. on road racing engines that create high RPM and require a medium heat range turbo style glow plug.
O.S. P4 Turbo Glow Plug "Super Hot"
€8.94
This is the O.S. P4 "Super Hot" Turbo Glow Plug.
C0264 Mugen Seiki Universal Joint Shaft
€3.74
C0264 Mugen Seiki Universal Joint ShaftThis is a set of replacement joint shafts for the universals used in the Mugen MBX5 buggie
C0271 Mugen Seiki 3x13.8mm Joint Pin
€3.98
These are replacement 3x13.8mm joint pins for Mugen buggies and fits the MBX5 family of buggies.
XRAY LIGHTWEIGHT DIFF OUTDRIVE ADAPTER - HUDY SPRING STEEL™ (2) - 335072
€17.48
XRAY LIGHTWEIGHT DIFF OUTDRIVE ADAPTER - HUDY SPRING STEEL™ (2) - 335072
O.S. RP8 Turbo Glow Plug "Cold"
€9.76
This is a O.S. Engines T-Series RP8 Cold Heat Range Turbo Glow Plug. This glow plug is ideal for .12-.21 size O.S. on road racing engines that create high RPM and require a cold heat range turbo style glow plug.
O.S. P3 Gold Turbo Glow Plug "Ultra Hot"
€10.57
The O.S. P3 Gold "Ultra Hot" Turbo Glow Plug glow plugs have always been tough enough to take the heat — and Speed P3 and P4 Gold Turbo Plugs with 24K gold plating take O.S. innovation to new levels! They’re the perfect complement for .18-.28 cu. in. turbo head off-road racing engines.
E2506 Mugen Seiki Rear Shock Boot (4)
€9.51
This is a pack of four replacement Mugen Rear Shock Boots, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy.
E2721 Mugen Seiki MBX8 Clutch Springs 0.95mm (4-shoe)
€6.30
E2721 Mugen Seiki MBX8 Clutch Springs 0.95mm (4-shoe)
O.S. .12/.21 Induction Silencer On-Road Air Filter System 72414000
€24.92
his is an optional O.S. Induction Silencer. This EFRA/IFMAR approved silencer was developed for .12 - .21 class on-road engines to help reduce noise levels, while at the same time having very little affect on power output.
TORNADO After Run oil 50 ml - J16099
€4.06
TORNADO After Run oil 50 ml - J16099
C0270 Mugen Seiki 3x12.8mm Joint Pin
€3.65
This is a set of replacement joint pins for the universals used in the Mugen MBX5 buggies, and are used to hold the universal joint together and go through the axle shafts and the joint shaft.
O.S. Exhaust Header Pipe SPRING 21VZ-B 72101272
€4.88
Exhaust Header Pipe SPRING 21VZ-B.
E0135-B Mugen Seiki Suspension Arm Spacer Set
€6.54
This is a replacement Mugen Suspension Arm Spacer Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.
HOT RACE Pneu Bangkok v2 Medium Preglued (2) - 001-0133
€19.11
HOT RACE Pneu Bangkok v2 Medium Preglued (2) - 001-0133
SILICONE FUEL LINE (TRANSLUCENT BLACK) 1M.
€3.24
This is a 2.5x6mm x 1m length translucent black Ultimate Racing Silicone Fuel Line. This ultra thick fuel line is an excellent choice for virtually all nitro racing applications.,
TORNADO AFTER RUN OIL (50ML) - J6099
€4.07
TORNADO AFTER RUN OIL (50ML) - J6099
RUDDOG 4/5mm Dual Bullet Gold Plug Male (2pcs) - RP-0198
€2.89
RUDDOG 4/5mm Dual Bullet Gold Plug Male (2pcs) - RP-0198
Hong Nor-4x67.6mm Arms Shaft-X3.6-07
€4.15
Hong Nor-4x67.6mm Arms Shaft-X3.6-07
Hong Nor-Front Arm Bushing-X3-45B
€2.36
Hong Nor-Front Arm Bushing-X3-45B
E0546 Mugen Seiki Damper Cap Bushing (4)
€5.04
This is a set of four replacement Mugen Damper Cap Bushings, and are intended for use with the Mugen MBX6 family of 1/8 Scale vehicles.
C0265 Mugen Seiki 2.5x15.8mm Universal Joint Pin
€2.65
This is a set of replacement joint pins for the universals used in the Mugen MBX5 buggies, and are used to hold the universal joint together and go through the axle shafts and the joint shaft.
E2149 Mugen MBX8 Aluminum Front/Front Lower Arm Mount
€19.92
This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the front location.
E2108 Mugen Seiki Complete Bushing Set
€11.30
This is a replacement Mugen Complete Bushing Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. This complete set includes all of bushings used in the suspension mounts to adjust toe angle, kick-up and anti-squat on the vehicle.
J-TECH-1:10 REAR TOURING TIRES SH.35 GOLD v2.0-JTP01035G
€6.10
J-TECH-1:10 REAR TOURING TIRES SH.35 GOLD v2.0-JTP01035G
T2240 Mugen Seiki 2nd Gear Spur V2 (49T)
€7.44
Mugen's MTX6 "V2" 2nd Gear Spur Gear is available in multiple tooth count options to fine tune the gear ratio of your model.
T2121 Mugen Seiki Front Upright
€5.98
This is a replacement Mugen Front Upright, and is intended for use with the Mugen MTX6 touring car.
T2232 Mugen Seiki 1st Gear Spur V2 (54T)
€7.44
Mugen's MTX6 "V2" 1st Gear Spur Gear is available in multiple tooth count options to fine tune the gear ratio of your model.
H0471 Mugen Seiki Rear Body Mount Arm Pin (4)
€4.23
This is a pack of four replacement Mugen Rear Body Mount Arm Pins, and are intended for use with the Mugen MRX5 and MRX4X 1/8 scale on road cars.
T2238 Mugen Seiki 2nd Gear Spur V2 (47T)
€7.44
Mugen's MTX6 "V2" 2nd Gear Spur Gear is available in multiple tooth count options to fine tune the gear ratio of your model.
Hong Nor -58T 2nd Spur Gear- HN-429D-H
€9.15
Hong Nor -58T 2nd Spur Gear- HN-429D-H
O.S. SPEED FRONT BEARING (O.S. 21XZ-B) 23731020
€14.63
This is a replacement O.S. Front Bearing, and is intended for use with the O.S. 21XZ-B.
O.S. Engines Large Carburetor O-Ring 27881820
€1.89
This is a replacement large carburetor O-ring for O.S. engines, and works for the VZ-B V-Spec and 30 VG engines.
E2718 Mugen Seiki ALUMI. CLUTCH SHOE (2)
€18.82
E2718 Mugen Seiki ALUMI. CLUTCH SHOE (2)
E2116 Mugen Seiki Rear Hub Carrier Hinge Pin (2)
€13.74
This is a pack of two replacement Mugen Rear Hub Carrier Hinge Pins, and are intended for use with the Mugen MBX 1/8 scale nitro buggy. These hinge pins secure the rear hub carrier to the rear arm.
T2230 Mugen gear 52 teeth 1st gear MTX-5 / MTX-6
€7.44
This is a pack of ten replacement T2230 Mugen gear 52 teeth 1st gear MTX-5 / MTX-6.
E0174 Mugen Seiki Washer Set
€9.27
This is a set of replacement Mugen washers, and are intended for use with the Mugen MBX series 1/8 scale vehicles.