Início (7)

Hong Nor - Silicon Joint Cover (4 pcs) - hn-326

5,65 €

Hong Nor - Silicon Joint Cover (4 pcs) - hn-326

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

IGT8 PARTS DIFFERENTIAL CASE IGT8HF001

9,10 €

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

GT85 SPRAY MULTIUSOS LIMPEZA E LUBRIFICAÇÃO 400ML

8,50 €

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0855 Mugen Seiki Plastic Ball End

7,70 €

This is a pack of ten replacement plastic ball ends for Mugen buggies and trucks, and fits the Mugen MBX5 buggies as well as the MBX5T trucks.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2219 Mugen Seiki Rear Universal Set

62,50 €

This is a replacement Mugen Rear Universal Set. These redesigned universal drive shafts are must be used with the MUGE2131 uprights and require a 8x16x5mm ball bearing. The length of the drive shaft is 89.5mm.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

GOLD CONNECTOR EC3 (1) SOCKETS YUKI MODEL AM-623-10F1

1,00 €

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2422 Mugen Seiki MBX8 1-Piece Wing Stay

14,75 €

This is the Mugen MBX8 1-Piece Wing Stay Set, including the wing stay, wing stay brace and four plastic wing buttons.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Hong Nor -24T (2nd) Clutch Gear Modul 0.8- HN-428R

9,40 €

Hong Nor -24T (2nd) Clutch Gear Modul 0.8- HN-428R

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Hong Nor -56T 2nd Spur Gear- HN-429C

7,60 €

Hong Nor -56T 2nd Spur Gear- HN-429C

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2121 Mugen Seiki Front Upright

6,75 €

This is a replacement Mugen Front Upright, and is intended for use with the Mugen MRX5. This upright can be used on either the Right or Left side of the car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Tamiya Parts M-05Ra F-Parts Upright front/rear 51425

7,15 €

Tamiya Parts M-05Ra F-Parts Upright front/rear 51425

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2114 Mugen Seiki Anti-Roll Bar Stopper Set (2)

12,65 €

This is a replacement Mugen Anti-Roll Bar Stopper Set, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

M4 NYLON LOCKNUT SET (10 PCS) ULTIMATE

2,99 €

This is a pack of ten Screws from Ultimate Racing. These are made of 12.9 steel which is the best grade you can use on your RC.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

B0753 SJG 3x5 F/H Screw

9,50 €

This is a pack of ten 3x5mm flat head screws from Mugen Seiki.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

XRAY HEX SCREW SFH M3x10 - SILVER (10) - 904310

7,50 €

HEX SCREW SFH M3x10 - SILVER (10) - 904310

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Hong Nor -58T 2nd Spur Gear- HN-429D

7,40 €

Hong Nor -58T 2nd Spur Gear- HN-429D

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

ROBITRONIC CA AKTIVATOR L-305

7,60 €

ROBITRONIC CA AKTIVATOR L-305

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

TAMIYA PARTS SPUR GEAR SET SPEED TUNNED 55/58T TT-01 - 53665

TAMIYA PARTS SPUR GEAR SET SPEED TUNED 55/58T TT-01 - 53665

13,90 €

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

PS-44 Translucent green Polycarbonate Spray 100 ML Tamiya

PS-44 TRANSLUCENT GREEN POLICARBONATE SPRAY 100ML TAMIYA

7,79 €

PS-44 Translucent Green Policarbonate Spray 100ml Tamiya These spray paints were especially developed for decorating transparent polycarbonate bodies used in R/C car modeling.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Hiro Seiko Hard Coated Alum. Pinion Gear (MoS2) DP64-43T

5,98 €

Hiro Seiko Hard Coated Alum. Pinion Gear (MoS2) DP64-43T

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2127 Mugen Seiki Rear Lower Suspension Shaft Set (2)

6,70 €

This is a replacement Mugen Rear Lower Suspension Shaft Set, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

IGT8 PARTS SPUR 45T 2ND GEAR MOD 1 IGT800545

7,65 €

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Mugen Seiki MTC2R 1/10 Electric Touring Car Kit (Carbon Chassis)

680,00 €

Mugen Seiki is excited to announce the NEW MTC2R electric touring car kit. The MTC2R is an evolution of the highly successful MTC2 platform. Ronald Völker won the ETS championship two years in a row with the MTC2 plateform and it’s now time to release the next generation MTC2R with several updates and improvements. Ronald and the team tested on different carpet and tarmac surfaces to develop the MTC2R.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

OSSP CLUTCH SPRING 0.90(B) SOFT (4PCS)

4,21 €

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0575 Mugen B.Bore Rear Damper Spring Set (Medium - 1.5/8.50T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0175 Mugen Seiki 2.1mm Front Anti Sway Bar

11,30 €

Últimos artigos em stock

This is a Mugen 2.1mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0576 Mugen Big Bore Rear Damper Spring Set (Hard - 1.5/8.25T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2509 Mugen Front Shock Spring 1.5 L70/7.75T (1pr): X8, X8T

15,99 €

Últimos artigos em stock

Mugen Seiki 70mm Front Shock Spring Set (Hard - 1.5/7.75T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2143 Mugen Seiki MBX8 Center Differential Mount

19,60 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Center Differential Mount. .

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0183 Mugen Seiki Rebound Stop Adjusting Screw

7,60 €

Últimos artigos em stock

This is a set of five replacement Mugen Seki rebound stop adjustment screws (droop screws) and are intended for use with the Mugen MBX6T 1/8 Truck.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0243 Mugen Seiki Aluminum Joint Cup (2)

16,50 €

Últimos artigos em stock

This is a set of two optional Mugen aluminum front or rear axle shafts, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0257 Mugen Seiki S5 Silicon O-Ring Set (10)

7,35 €

Últimos artigos em stock

This is a replacement Mugen S5 Silicon O-Ring Set, and is intended for use with the Mugen MBX family of vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0814 Mugen Seiki Ball Link 7mm

5,15 €

Últimos artigos em stock

This is a set of replacement plastic ball ends for the Mugen MBX truggy. These are used for the steering linkage and connect the front hubs to the steering ackerman

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2515 Mugen Front Damper Spring 1.6 L70/9.5T: X8, X8T

15,99 €

Últimos artigos em stock

Mugen Seiki 70mm Front Shock Spring Set (X Soft - 1.6/9.5T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0319 Mugen Seiki Brake Pad (4)

41,20 €

Últimos artigos em stock

This is a set of four replacement Mugen Brake Pads, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0170 Mugen Seiki 2.9mm Rear Anti-Roll Bar

11,50 €

Últimos artigos em stock

This is a Mugen 2.9mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0225 Mugen Seiki Joint Cup

13,70 €

Últimos artigos em stock

This is a Mugen joint cup, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2150 Mugen MBX8 Aluminum Front/Rear Lower Arm Mount

24,50 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the rear location

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Mugen Seiki Front Damper Spring (Hard, 75mm, 9.0T) (2)

11,00 €

Últimos artigos em stock

This is a set of two hard front shock springs from Mugen and are intended for use with the Mugen MBX6. These springs are 75mm in length, and have 9 Turns.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

GHEA Aluminum Ride Height Gauge (20-30mm)

17,99 €

GHEA Aluminum Ride Height Gauge (20-30mm)

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Hong Nor -Clutch Gear (1st) 17T- HN-429E

5,80 €

Hong Nor -Clutch Gear (1st) 17T- HN-429E

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2201 Mugen Seiki Differential Case

10,90 €

The Mugen Carbon Front Upright Arms offer improved initial steering response, and makes the vehicle more stable through the middle and exit of the corner. They also help to reduce bump steer and make the vehicle more predictable in bumpy conditions.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2507 Mugen Front Shock Spring 1.5 L70/8.25T (1pr): X8, X8T

15,99 €

Últimos artigos em stock

This is an optional Mugen 70mm Front Shock Spring Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. These springs are 70mm in length and are made from 1.5mm wire. This 8.25T spring rate is slightly softer than the 8.0T front springs included with the MBX7.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes