MUGEN SEIKI (2)

H0471 Mugen Seiki Rear Body Mount Arm Pin (4)

5,20 €

This is a pack of four replacement Mugen Rear Body Mount Arm Pins, and are intended for use with the Mugen MRX5 and MRX4X 1/8 scale on road cars.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2144 Mugen Seiki MTC1 Aluminum Lower Arm Mount (2)

13,99 €

This is an optional set of Mugen Seiki Aluminum MTC1 Lower Arm Mounts, intended for use with the MTC1 Competition 1/10 Electric Touring Car Kit as a replacement for the stock plastic mounts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

B0325 Mugen Super Silicone Oil Shock 500 (50ml)

10,20 €

Mugen Super Silicone 500 CST shock fluid formulated in Japan with high grade silicones. The bottle has a small pour spout with a screw on top for safe traveling. Bottle contains 50ml (1.7 oz).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

B0333 Mugen Super Silicone Oil Shock 500 (50ml)

10,20 €

Mugen Super Silicone 500 CST shock fluid formulated in Japan with high grade silicones. The bottle has a small pour spout with a screw on top for safe traveling. Bottle contains 50ml (1.7 oz).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Mugen Seiki SN4 Nylon Locknut (10)

9,85 €

This is a pack of ten M4 nylon locking nuts from Mugen Seiki.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2235 0.8M 2nd Gear Pinion 24T: MRX6X Mugen Seiki Racing

18,00 €

H2235 0.8M 2nd Gear Pinion 24T: MRX6X Mugen Seiki Racing

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

B0430 MUGEN SEIKI SERVO HORN MOUNTS FOR B0429

5,95 €

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

This is a replacement Mugen Carbon MTC2 Front Lower Arm

A2147F Mugen Seiki Carbon MTC2 Front Lower Arm

23,00 €

This is a replacement Mugen Carbon MTC2 Front Lower Arm

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2813 5mm Aluminum Ball (4pcs): MTC2

15,80 €

5mm Aluminum Ball (4pcs): MTC2

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

B0753 SJG 3x5 F/H Screw

9,50 €

This is a pack of ten 3x5mm flat head screws from Mugen Seiki.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2173 Mugen Seiki Arm insert set MBX8

17,10 €

This is the Mugen MBX8 arm mount insert set

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

B0677 Mugen SK 3x10 Set Screw (10)

4,85 €

This is a pack of ten 3x10mm SK set screws from Mugen Seiki.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Mugen Seiki MTC2R 1/10 Electric Touring Car Kit (Carbon Chassis)

680,00 €

Mugen Seiki is excited to announce the NEW MTC2R electric touring car kit. The MTC2R is an evolution of the highly successful MTC2 platform. Ronald Völker won the ETS championship two years in a row with the MTC2 plateform and it’s now time to release the next generation MTC2R with several updates and improvements. Ronald and the team tested on different carpet and tarmac surfaces to develop the MTC2R.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

MUGEN REAR WING MOUNT (+15) - E2429

13,70 €

MUGEN REAR WING MOUNT (+15) - E2429

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

MUGEN MRX WIRE FOR MUFFLER - H0952

6,80 €

MUGEN MRX WIRE FOR MUFFLER - H0952

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2707 Mugen Seiki Clutch Thrust Bearing Stopper

2,86 €

This is a replacement Mugen Clutch Thrust Bearing Stopper, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2601/1 Bearings 3 x 6 x 2.5mm (10pcs): MTC1

28,46 €

A2601/1 Bearings 3 x 6 x 2.5mm (10pcs): MTC1.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2811 Mugen Seiki MTC1/MTC2 Shims (3x6x0.5mm) (10)

12,85 €

A2811 Mugen Shims (3x6x0.5mm) 10pcs: MTC1/MTC2

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

B0553 Adjustable Aluminum Servo Horn 25T (Futaba)

27,75 €

B0553 Adjustable Aluminum Servo Horn 25T (Futaba).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

B0663 Mugen 3x12mm SG Cap Head Screw

5,80 €

This is a pack of ten replacement 3x12mm cap head screws from Mugen.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0545 Mugen Seiki Damper End Set

10,00 €

This is a replacement Mugen Damper End Set, and is intended for use with the Mugen MBX family of 1/8 Scale vehicles. This set includes four shaft ends and four spring cups.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0811-B Mugen Seiki Rear Upper Arm Link (Long)

5,90 €

This is a the new optional long rear upper arm link that comes with the Mugen MBX buggy kits.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2132 Mugen Front Upper Suspension Arm Set

13,70 €

These front upper suspension arms have been shortened 1.6mm in length. This will allow the use of the MUGE0161 spacer between the pillar ball and the upper arm. This will allow for the same camber on each side of the buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2156 Mugen 1mm MBX8 Graphite Rear Lower Arm Plate (2)

23,60 €

This is a pack of two optional Mugen 1mm MBX8 Graphite Rear Lower Arm Plates. These plates attach to the suspension arm to increase stiffness. Mounting hardware not included.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2260 Mugen Seiki MBX8 Center Joint Cup

12,90 €

This is an optional Mugen MBX8 Center Joint Cup.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2516 Mugen Front Damper Spring 1.6 L70/9.25T: X8, X8T

15,99 €

Mugen Seiki 70mm Front Shock Spring Set (Soft - 1.6/9.25T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0285B Mugen Seiki MRX6 2nd Gear Spur Gear (46T)

6,00 €

Mugen MRX6 2nd Gear Spur Gear. Use these gears to fine tune the ratio of your car and dial in your top speed. Choose from 45, 46 (stock), and 47 tooth options.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0858 Mugen Seiki Plastic Ball Link Ends Short 6mm

9,95 €

This is a set of replacement plastic ball ends used on all Mugen MBX, MTX and MRX off-road and on-road cars.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2124B Mugen Seiki MRX6 Rear Upright (Hard)

10,05 €

Mugen MRX6 Rear Upright. This is the replacement rear upright, and can be used on the right or left side of the chassis.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2210B Mugen Seiki MRX6 Gear Shaft

15,10 €

Mugen MRX6 Pulley Set. Package includes the replacement plastic pulleys used with the MRX6.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2110 Mugen Seiki Front Graphite Upright Arm

12,98 €

This is a replacement Mugen Front Graphite Upright Arm, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2311 Mugen Seiki Graphite Radio Tray Brace

11,70 €

This is a replacement Mugen Graphite Radio Tray Brace.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0702B Mugen Seiki Flywheel Taper Cone

4,90 €

These are replacement 3x13.8mm joint pins for Mugen buggies and fits the MBX5 family of buggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0751 Mugen Seiki 0.9mm Clutch Spring Set (3)

5,81 €

This is a set of stock 0.9mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0161 Mugen Seiki Front Track Width Adjustment Spacer (4)

6,40 €

This is a set of replacement Mugen front track width adjustment spacers, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0238 Mugen Seiki 2.5x14.8mm Universal Joint Pin (4)

6,55 €

This is a set of four replacement Mugen 2.5x14.8mm Universal Joint Pins, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0705 Mugen Seiki Flywheel Washer/Spacers (4)

3,80 €

This is a set of four replacement Mugen Seiki Flywheel Washer/Spacers, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0717A Mugen Seiki 0.95mm Clutch Spring Set (3)

9,10 €

This is a set of optional Mugen 0.95mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2138 Mugen Seiki 2.5mm Rear Anti-Roll Bar

12,50 €

This is an optional Mugen 2.5mm Rear Anti-Roll Bar.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2253 Mugen Seiki MBX8 Straight Cut Bevel Gear (13T)

17,10 €

This is a replacement Mugen 13 Tooth MBX8 Straight Cut Bevel Gear. This is the standard Bevel Gear included with the MBX8.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2420 Mugen Seiki MBX7R Chassis Weight (40g)

21,75 €

This is an optional Mugen 40 Gram Chassis Weight. This weight mounts to the back of the front gearbox or in front of the rear gear box on the MBX7R and MBX7TR nitro vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2531 Mugen Seiki Rear Damper Shaft (2)

12,25 €

This is a pack of two replacement Mugen Rear Damper Shafts. These shafts have been updated to be 3.5mm thick.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2712 Mugen Seiki Engine Mount Washer Set (4)

6,35 €

This is a pack of four replacement Mugen Engine Mount Washers for use with the MBX8 line of nitro vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0410 Mugen Seiki Front Bumper

8,45 €

This is a replacement front bumper for the Mugen MBX6 family of buggies. The front bumper is now reinforced.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

B0509 Mugen Seiki Setting Driver For Engine

8,90 €

This is an optional setting driver for your offroad Nitro engine. With the long handle and narrow blade this is the perfect screwdriver for fine tuning your engines performance.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes