MBX7R AND OLD BUGGY CARS MBX6 MBX5 ....

E0135-B Mugen Seiki Suspension Arm Spacer Set

€6.54

This is a replacement Mugen Suspension Arm Spacer Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Buy Details

Add to basket View details

E0517 Mugen Seiki Front Shock Shaft (2)

€9.51

This is a pack of two replacement front shock shafts for the Mugen MBX7 and MBX5T truggy.

Buy Details

Add to basket View details

C0265 Mugen Seiki 2.5x15.8mm Universal Joint Pin

€2.65

This is a set of replacement joint pins for the universals used in the Mugen MBX5 buggies, and are used to hold the universal joint together and go through the axle shafts and the joint shaft.

Buy Details

Add to basket View details

E0545 Mugen Seiki Damper End Set

€8.13

This is a replacement Mugen Damper End Set, and is intended for use with the Mugen MBX family of 1/8 Scale vehicles. This set includes four shaft ends and four spring cups.

Buy Details

Add to basket View details

E0717A Mugen Seiki 0.95mm Clutch Spring Set (3)

€7.40

This is a set of optional Mugen 0.95mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on.

Buy Details

Add to basket View details

E2108 Mugen Seiki Complete Bushing Set

€11.30

This is a replacement Mugen Complete Bushing Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. This complete set includes all of bushings used in the suspension mounts to adjust toe angle, kick-up and anti-squat on the vehicle.

Buy Details

Add to basket View details

E2805 Mugen Seiki Throttle Linkage Parts Set

€8.37

This is a replacement Mugen Throttle Linkage Parts Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Buy Details

Add to basket View details

E2116 Mugen Seiki Rear Hub Carrier Hinge Pin (2)

€13.74

This is a pack of two replacement Mugen Rear Hub Carrier Hinge Pins, and are intended for use with the Mugen MBX 1/8 scale nitro buggy. These hinge pins secure the rear hub carrier to the rear arm.

Buy Details

Add to basket View details

C0264 Mugen Seiki Universal Joint Shaft

€3.74

C0264 Mugen Seiki Universal Joint ShaftThis is a set of replacement joint shafts for the universals used in the Mugen MBX5 buggie

Buy Details

Add to basket View details

E0240 Mugen 1mm Wide Offset Wheel Hubs

€9.76

This is a set of two Mugen 1mm wide offset wheel hubs and are intended for use with the Mugen MBX6 1/8 scale buggy.

Buy Details

Add to basket View details

E0238 Mugen Seiki 2.5x14.8mm Universal Joint Pin (4)

€5.33

This is a set of four replacement Mugen 2.5x14.8mm Universal Joint Pins, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Buy Details

Add to basket View details

E2421 Mugen Seiki MBX8 Front Bumper

€7.40

This is a replacement Mugen MBX8 Front Bumper.

Buy Details

Add to basket View details

E0811-B Mugen Seiki Rear Upper Arm Link (Long)

€4.80

This is a the new optional long rear upper arm link that comes with the Mugen MBX buggy kits.

Buy Details

Add to basket View details

E2506 Mugen Seiki Rear Shock Boot (4)

€9.51

This is a pack of four replacement Mugen Rear Shock Boots, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Buy Details

Add to basket View details

H0274 Mugen Seiki 2.5x11.8mm Roller Pin (10)

€4.59

This is a pack of ten replacement Mugen 2.5x11.8mm Roller Pins, and are intended for use with the Mugen MRX4X 1/8 scale on road car.

Buy Details

Add to basket View details

H0471 Mugen Seiki Rear Body Mount Arm Pin (4)

€4.23

This is a pack of four replacement Mugen Rear Body Mount Arm Pins, and are intended for use with the Mugen MRX5 and MRX4X 1/8 scale on road cars.

Buy Details

Add to basket View details

E0161 Mugen Seiki Front Track Width Adjustment Spacer (4)

€5.20

This is a set of replacement Mugen front track width adjustment spacers, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Buy Details

Add to basket View details

C0702B Mugen Seiki Flywheel Taper Cone

€3.98

These are replacement 3x13.8mm joint pins for Mugen buggies and fits the MBX5 family of buggies.

Buy Details

Add to basket View details

E0705 Mugen Seiki Flywheel Washer/Spacers (4)

€3.09

This is a set of four replacement Mugen Seiki Flywheel Washer/Spacers, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Buy Details

Add to basket View details

C0751 Mugen Seiki 0.9mm Clutch Spring Set (3)

€4.72

This is a set of stock 0.9mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.

Buy Details

Add to basket View details

E2147 Mugen 1.5mm Trailing Front Hub Carrier Set

€11.22

This is an optional Mugen Seiki 1.5mm Trailing Front Hub Carrier Set that can be used with CVA (MUGE0221 & MUGE0224) and universal driveshaft on all the MBX family of buggies, trucks, and GT vehicles. Package includes one left and right side, as well as four inserts.

Buy Details

Add to basket View details

E0410 Mugen Seiki Front Bumper

€6.87

This is a replacement front bumper for the Mugen MBX6 family of buggies. The front bumper is now reinforced.

Buy Details

Add to basket View details

E2420 Mugen Seiki MBX7R Chassis Weight (40g)

€17.68

This is an optional Mugen 40 Gram Chassis Weight. This weight mounts to the back of the front gearbox or in front of the rear gear box on the MBX7R and MBX7TR nitro vehicles.

Buy Details

Add to basket View details

FP2151 FP Aluminum One Piece Wing Button: MBX, Associated, Xray

€12.19

FP2151 FP Aluminum One Piece Wing Button: MBX, Associated, Xray.

Buy Details

Add to basket View details

E2504 Mugen Seiki Shock End Steel Ball (4)

€7.97

This is a pack of four replacement Mugen Shock End Steel Balls, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy. These balls are directional. Be careful about the direction during installation.

Buy Details

Add to basket View details

E2516 Mugen Front Damper Spring 1.6 L70/9.25T: X8, X8T

€13.00

Mugen Seiki 70mm Front Shock Spring Set (Soft - 1.6/9.25T) (2).

Buy Details

Add to basket View details

E2310 Mugen Seiki Aluminum Servo Saver Arm

€18.13

This is an optional Mugen Aluminum Servo Saver Arm, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Buy Details

Add to basket View details

E2123 Mugen Seiki Steel Kingpin Balls (2)

€17.48

This is a pack of two optional Mugen Steel Kingpin Balls. These kingpin balls are heavier than the stock parts, and eliminate the need for arm weights.

Buy Details

Add to basket View details

E2124 Mugen Seiki Steel Kingpin Ball Adjusting Nut (2)

€9.84

This is a pack of two optional Mugen Steel Kingpin Ball Adjusting Nuts. These nuts are heavier than the stock parts, and eliminate the need for arm weights.

Buy Details

Add to basket View details

E2803 Mugen Seiki Steering/Throttle Servo Horn & Parts Set

€4.80

This is a replacement Mugen Steering/Throttle Servo Horn & Parts Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Buy Details

Add to basket View details

C0753A Mugen Seiki 1.10mm 3-Shoe Clutch Spring Set (3)

€4.72

This is a set of stock 1.1mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.

Buy Details

Add to basket View details

E2419 Mugen Seiki MBX7R/X7TR Chassis Weight (20G)

€17.68

The Mugen Seiki X7R/X7TR Chassis Weight can be mounted to the back of the front gear box, or to the front of the rear gear box.

Buy Details

Add to basket View details

E2707 Mugen Seiki 0.8 Clutch Springs (4)

€4.31

This is a pack of four replacement Mugen 0.8 Clutch Springs for use with the optional Mugen 4-Shoe Clutch System.

Buy Details

Add to basket View details

E2137 Mugen Seiki 2.8mm Front Anti-Roll Bar

€10.16

This is an optional Mugen 2.8mm Front Anti-Roll Bar. This bar is slightly thicker than the standard 2.7mm bar included with the MGT7 and MGT7E.

Buy Details

Add to basket View details

E2708 Mugen Seiki 0.9 Clutch Springs (4)

€4.31

This is a pack of four replacement Mugen 0.9 Clutch Springs for use with the optional Mugen 4-Shoe Clutch System.

Buy Details

Add to basket View details

E2138 Mugen Seiki 2.5mm Rear Anti-Roll Bar

€10.16

This is an optional Mugen 2.5mm Rear Anti-Roll Bar.

Buy Details

Add to basket View details

C0801H Mugen Seiki Steering Rack Bushings (2)

€3.81

This is a set of replacement steering rack bushings for the Mugen MBX5 family of buggies. These are the bushings that go into the steering ackerman plate, and connect the ackerman plate to the steering uprights.

Buy Details

Add to basket View details

E2815 Mugen Seiki Aluminum Throttle Servo Horn

€23.33

This is an optional Mugen Seiki Aluminum Throttle Servo Horn. This servo horn is made from high quality A7075 aluminum and provides a more direct brake feel.

Buy Details

Add to basket View details

E0813 Mugen Seiki Rear Upper Arm Link

€6.54

This is the replacement rear upper arm link assembly ends for the Mugen MBX.

Buy Details

Add to basket View details

E2302 Mugen Seiki Radio Box

€13.66

This is a replacement Mugen Radio Box, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Buy Details

Add to basket View details

E2201 Mugen Seiki Differential Case

€8.86

The Mugen Carbon Front Upright Arms offer improved initial steering response, and makes the vehicle more stable through the middle and exit of the corner. They also help to reduce bump steer and make the vehicle more predictable in bumpy conditions.

Buy Details

Add to basket View details

E2505 Mugen Seiki Front Shock Boot (4)

€9.51

This is a pack of four replacement Mugen Front Shock Boots, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Buy Details

Add to basket View details

E0814 Mugen Seiki Ball Link 7mm

€4.19

This is a set of replacement plastic ball ends for the Mugen MBX truggy. These are used for the steering linkage and connect the front hubs to the steering ackerman

Buy Details

Add to basket View details