Peças Mugen MBX8T Nitro 1/8 truggy Off road

E2506 Mugen Seiki Rear Shock Boot (4)

11,70 €

This is a pack of four replacement Mugen Rear Shock Boots, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0271 Mugen Seiki 3x13.8mm Joint Pin

4,90 €

These are replacement 3x13.8mm joint pins for Mugen buggies and fits the MBX5 family of buggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0264 Mugen Seiki Universal Joint Shaft

4,60 €

C0264 Mugen Seiki Universal Joint ShaftThis is a set of replacement joint shafts for the universals used in the Mugen MBX5 buggie

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0546 Mugen Seiki Damper Cap Bushing (4)

6,20 €

This is a set of four replacement Mugen Damper Cap Bushings, and are intended for use with the Mugen MBX6 family of 1/8 Scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2505 Mugen Seiki Front Shock Boot (4)

11,70 €

This is a pack of four replacement Mugen Front Shock Boots, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2721 Mugen Seiki MBX8 Clutch Springs 0.95mm (4-shoe)

7,75 €

This is an Mugen MBX8 Clutch Springs 0.95mm (4-shoe).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0135-B Mugen Seiki Suspension Arm Spacer Set

8,05 €

This is a replacement Mugen Suspension Arm Spacer Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0270 Mugen Seiki 3x12.8mm Joint Pin

4,49 €

This is a set of replacement joint pins for the universals used in the Mugen MBX5 buggies, and are used to hold the universal joint together and go through the axle shafts and the joint shaft.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0265 Mugen Seiki 2.5x15.8mm Universal Joint Pin

3,26 €

This is a set of replacement joint pins for the universals used in the Mugen MBX5 buggies, and are used to hold the universal joint together and go through the axle shafts and the joint shaft.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2149 Mugen MBX8 Aluminum Front/Front Lower Arm Mount

24,50 €

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the front location.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2108 Mugen Seiki Complete Bushing Set

13,90 €

This is a replacement Mugen Complete Bushing Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. This complete set includes all of bushings used in the suspension mounts to adjust toe angle, kick-up and anti-squat on the vehicle.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2237 Mugen Seiki HTD Differential Cup Outdrive (2)

19,15 €

This is a pack of two replacement Mugen HTD Differential Cup Outdrives for use with the optional HTD (High Traction Diff) Differentials.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2168 Mugen Seiki Carbon Front Upright Arm (-3mm) (2)

22,50 €

The Mugen Carbon Front Upright Arms offer improved initial steering response, and makes the vehicle more stable through the middle and exit of the corner. They also help to reduce bump steer and make the vehicle more predictable in bumpy conditions.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2173 Mugen Seiki Arm insert set MBX8

17,10 €

This is the Mugen MBX8 arm mount insert set

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2718 Mugen Seiki ALUMI. CLUTCH SHOE (2)

23,15 €

E2718 Mugen Seiki ALUMI. CLUTCH SHOE (2)

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2241 Mugen Seiki HTD Differential Gasket (10)

11,70 €

This is a pack of ten replacement Mugen HTD Differential Gaskets for use with the optional HTD (High Traction Diff) Differentials.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2310 Mugen Seiki Aluminum Servo Saver Arm

22,30 €

This is an optional Mugen Aluminum Servo Saver Arm, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2816 Mugen Seiki MBX7T Fuel Tank

22,44 €

This is a replacement Mugen MBX7T Fuel Tank.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2805 Mugen Seiki Throttle Linkage Parts Set

10,30 €

This is a replacement Mugen Throttle Linkage Parts Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2702 Mugen Seiki Light Weight Clutch Bell (13T)

22,50 €

This is a replacement Mugen 13 Tooth Light Weight Clutch Bell. This clutch bell features reduced material to reduce weight and improve air flow.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0545 Mugen Seiki Damper End Set

10,00 €

This is a replacement Mugen Damper End Set, and is intended for use with the Mugen MBX family of 1/8 Scale vehicles. This set includes four shaft ends and four spring cups.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2232 Mugen Seiki HTD Differential Case

12,90 €

This is a replacement Mugen Differential Case for use with the optional HTD (High Traction Diff) Differentials.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2116 Mugen Seiki Rear Hub Carrier Hinge Pin (2)

16,90 €

This is a pack of two replacement Mugen Rear Hub Carrier Hinge Pins, and are intended for use with the Mugen MBX 1/8 scale nitro buggy. These hinge pins secure the rear hub carrier to the rear arm.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0471 Mugen Seiki Rear Body Mount Arm Pin (4)

5,20 €

This is a pack of four replacement Mugen Rear Body Mount Arm Pins, and are intended for use with the Mugen MRX5 and MRX4X 1/8 scale on road cars.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0174 Mugen Seiki Washer Set

11,40 €

This is a set of replacement Mugen washers, and are intended for use with the Mugen MBX series 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0517 Mugen Seiki Front Shock Shaft (2)

11,70 €

This is a pack of two replacement front shock shafts for the Mugen MBX7 and MBX5T truggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

MUGEN REAR WING MOUNT (+15) - E2429

13,70 €

MUGEN REAR WING MOUNT (+15) - E2429

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2712 Mugen Seiki Engine Mount Washer Set (4)

6,35 €

This is a pack of four replacement Mugen Engine Mount Washers for use with the MBX8 line of nitro vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2242 Mugen Seiki HTD S6 Silicon O-Ring (10)

6,65 €

This is a pack of ten replacement Mugen HTD S6 Silicon O-Rings for use with the HTD (High Traction Diff) Differentials

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2421 Mugen Seiki MBX8 Front Bumper

9,10 €

This is a replacement Mugen MBX8 Front Bumper.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2142 Mugen Seiki MBX8 Gearbox

17,10 €

This is a replacement Mugen MBX8 Gear Box. This gearbox has been updated to allow you to remove and service the differential without detaching the suspension arm mounts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2564 Mugen Seiki MBX8 Shock Retaining Pin (4)

12,65 €

This is a pack of four optional Mugen Seiki Big Bore Blank Shock Pistons. Create your own custom piston hole sizes with these blank pistons.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2717 Mugen Seiki MBX8 Clutch Pins (4-shoe)

10,69 €

This is an Mugen MBX8 Carbon Clutch Shoes (4-shoe)

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2238 Mugen Seiki MBX8 Diff. Gear 10T (4)

8,90 €

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0705 Mugen Seiki Flywheel Washer/Spacers (4)

3,80 €

This is a set of four replacement Mugen Seiki Flywheel Washer/Spacers, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2516 Mugen Front Damper Spring 1.6 L70/9.25T: X8, X8T

15,99 €

Mugen Seiki 70mm Front Shock Spring Set (Soft - 1.6/9.25T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0717A Mugen Seiki 0.95mm Clutch Spring Set (3)

9,10 €

This is a set of optional Mugen 0.95mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2138 Mugen Seiki 2.5mm Rear Anti-Roll Bar

12,50 €

This is an optional Mugen 2.5mm Rear Anti-Roll Bar.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2719 Mugen Seiki MBX8 Light Weight Clutch Bell (13T)

22,66 €

This is an optional Mugen 13 Tooth MBX8 Light Weight Clutch Bell. This clutch bell features large cut-outs, reducing weight and improving heat dissipation.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0161 Mugen Seiki Front Track Width Adjustment Spacer (4)

6,40 €

This is a set of replacement Mugen front track width adjustment spacers, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0702B Mugen Seiki Flywheel Taper Cone

4,90 €

These are replacement 3x13.8mm joint pins for Mugen buggies and fits the MBX5 family of buggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2420 Mugen Seiki MBX7R Chassis Weight (40g)

21,75 €

This is an optional Mugen 40 Gram Chassis Weight. This weight mounts to the back of the front gearbox or in front of the rear gear box on the MBX7R and MBX7TR nitro vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0751 Mugen Seiki 0.9mm Clutch Spring Set (3)

5,81 €

This is a set of stock 0.9mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0811-B Mugen Seiki Rear Upper Arm Link (Long)

5,90 €

This is a the new optional long rear upper arm link that comes with the Mugen MBX buggy kits.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2708 Mugen Seiki 0.9 Clutch Springs (4)

5,30 €

This is a pack of four replacement Mugen 0.9 Clutch Springs for use with the optional Mugen 4-Shoe Clutch System.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0813 Mugen Seiki Rear Upper Arm Link

8,05 €

This is the replacement rear upper arm link assembly ends for the Mugen MBX.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2264 Mugen Seiki MBX8T/MBX8TE Conical Gear (46T)

59,80 €

This is a replacement Mugen 46 Tooth Conical Gear for use with the MBX8T and MBX8TE truggies. This conical gear is used in the front and rear gearbox.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0167 Mugen Seiki 2.6mm Front Anti-Roll Bar

11,30 €

This is a Mugen 2.6mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2123 Mugen Seiki Steel Kingpin Balls (2)

21,50 €

This is a pack of two optional Mugen Steel Kingpin Balls. These kingpin balls are heavier than the stock parts, and eliminate the need for arm weights.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0801H Mugen Seiki Steering Rack Bushings (2)

4,69 €

This is a set of replacement steering rack bushings for the Mugen MBX5 family of buggies. These are the bushings that go into the steering ackerman plate, and connect the ackerman plate to the steering uprights.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Menu

Carrinho de compras

Início

MBX8T

APOIO AO CLIENTE

LOJA HOBBY351 LISBOA