Peças para marca Mugen Seiki, modelos MTX6R, MRX6, MBX8WE, MBX8E, MGT7, MBX8T, MBX7R. (2)

E0170 Mugen Seiki 2.9mm Rear Anti-Roll Bar

11,50 €

Últimos artigos em stock

This is a Mugen 2.9mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Mugen Seiki Front Damper Spring (Hard, 75mm, 9.0T) (2)

11,00 €

Últimos artigos em stock

This is a set of two hard front shock springs from Mugen and are intended for use with the Mugen MBX6. These springs are 75mm in length, and have 9 Turns.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0576 Mugen Big Bore Rear Damper Spring Set (Hard - 1.5/8.25T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2258 Mugen MBX8 ECO HTD Plastic Spur Gear (44T)

15,80 €

Últimos artigos em stock

This is an optional Mugen 44 Tooth MBX8 ECO HTD Plastic Spur Gear.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2507 Mugen Front Shock Spring 1.5 L70/8.25T (1pr): X8, X8T

15,99 €

Últimos artigos em stock

This is an optional Mugen 70mm Front Shock Spring Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. These springs are 70mm in length and are made from 1.5mm wire. This 8.25T spring rate is slightly softer than the 8.0T front springs included with the MBX7.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2157 Mugen 1.2mm MBX8 Graphite Rear Lower Arm Plate (2)

24,50 €

Últimos artigos em stock

This is a pack of two optional Mugen 1.2mm MBX8 Graphite Rear Lower Arm Plates. These plates attach to the suspension arm to increase stiffness. Mounting hardware not included.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0243 Mugen Seiki Aluminum Joint Cup (2)

16,50 €

Últimos artigos em stock

This is a set of two optional Mugen aluminum front or rear axle shafts, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0257 Mugen Seiki S5 Silicon O-Ring Set (10)

7,35 €

Últimos artigos em stock

This is a replacement Mugen S5 Silicon O-Ring Set, and is intended for use with the Mugen MBX family of vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2158 Mugen MBX8 Graphite Front Upper Steering Plate

27,60 €

Últimos artigos em stock

This is an optional Mugen MBX8 Graphite Front Upper Steering Plate, with two included Servo Saver Spacers and hardware.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0319 Mugen Seiki Brake Pad (4)

41,20 €

Últimos artigos em stock

This is a set of four replacement Mugen Brake Pads, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

ULTIMATE 16MM SHOCK BLADDERS (4)

8,21 €

Últimos artigos em stock

These are the new 16mm diameter Ultimate Racing shock absorber membranes compatible with major car brands such as: Mugen, Kyosho, Xray, Serpent, HB, Losi and others.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2143 Mugen Seiki MBX8 Center Differential Mount

19,60 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Center Differential Mount. .

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2509 Mugen Front Shock Spring 1.5 L70/7.75T (1pr): X8, X8T

15,99 €

Últimos artigos em stock

Mugen Seiki 70mm Front Shock Spring Set (Hard - 1.5/7.75T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2262 Mugen Seiki MBX8 115mm Center Drive Shaft

12,80 €

Últimos artigos em stock

Mugen MBX8 115mm Center Drive Shaft. This optional center dog bone eliminates friction and creates a more efficient drivetrain, increased acceleration and more traction compared to the stock universal driveshafts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0175 Mugen Seiki 2.1mm Front Anti Sway Bar

11,30 €

Últimos artigos em stock

This is a Mugen 2.1mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0601/1A Mugen Seiki 15x21x4mm Bearing (10)

57,15 €

Últimos artigos em stock

Mugen 15x21x4mm Bearing. Package includes ten rubber shielded bearings.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2145 Mugen MBX8 Rear Lower Suspension Arm Set

16,90 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Rear Lower Suspension Arm Set. This set also includes the plastic arm inserts, but no mounting hardware.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2515 Mugen Front Damper Spring 1.6 L70/9.5T: X8, X8T

15,99 €

Últimos artigos em stock

Mugen Seiki 70mm Front Shock Spring Set (X Soft - 1.6/9.5T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0183 Mugen Seiki Rebound Stop Adjusting Screw

7,60 €

Últimos artigos em stock

This is a set of five replacement Mugen Seki rebound stop adjustment screws (droop screws) and are intended for use with the Mugen MBX6T 1/8 Truck.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2234 Mugen Seiki HTD Spur Gear (44T)

44,17 €

Últimos artigos em stock

This is an optional Mugen 44 Tooth Spur Gear for use with the optional HTD (High Traction Diff) Center Differential (MUGE2245).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2602-1 Mugen Seiki 8x16x5mm NMB Bearing (10)

50,90 €

Últimos artigos em stock

This is a pack of ten replacement Mugen 8x16x5mm NMB Bearings. Mugen NMB bearings are a higher grade than regular bearings and provide increased performance and durability.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0166 Mugen Seiki 2.5mm Front Anti-Roll Bar

11,30 €

Últimos artigos em stock

This is a Mugen 2.5mm Front Anti-Roll Bar, and is intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0225 Mugen Seiki Joint Cup

13,70 €

Últimos artigos em stock

This is a Mugen joint cup, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2243 Mugen Seiki HTD Differential Washer Set

10,10 €

Últimos artigos em stock

This is a replacement Mugen HTD Differential Washer Set for use with the HTD (High Traction Diff) Differentials.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0117 Mugen Seiki Titanium Rear Camber Rod (2)

55,25 €

Últimos artigos em stock

This is a set of optional titanium rear camber rods for the Mugen MBX5 buggies. These are lighter and stronger than the stock parts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0168 Mugen Seiki 2.7mm Rear Anti-Roll Bar

11,40 €

Últimos artigos em stock

This is a Mugen 2.7mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0814 Mugen Seiki Ball Link 7mm

5,15 €

Últimos artigos em stock

This is a set of replacement plastic ball ends for the Mugen MBX truggy. These are used for the steering linkage and connect the front hubs to the steering ackerman

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2136 Mugen Seiki 2.7mm Front Anti-Roll Bar

12,95 €

Últimos artigos em stock

This is a replacement Mugen 2.7mm Front Anti-Roll Bar. This bar came included as standard equipment with the MGT7 and MGT7E.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0575 Mugen B.Bore Rear Damper Spring Set (Medium - 1.5/8.50T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2150 Mugen MBX8 Aluminum Front/Rear Lower Arm Mount

24,50 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the rear location

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0718A Mugen Seiki 1.05mm Clutch Spring Set (3)

9,10 €

Últimos artigos em stock

This is a pack of three optional Mugen 1.05mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2428 Mugen Rear Wing Stay Spacer (+15): X8/E, X8T/E

14,75 €

Últimos artigos em stock

This is an optional Mugen Rear Wing Stay Spacer for the MBX8 series of Buggies and Truggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2529 Mugen Seiki 16mm Rear Damper Set

88,50 €

Últimos artigos em stock

This is a replacement Mugen 16mm Rear Damper Set. This set includes the necessary parts to assemble two complete rear shocks, minus springs. These shocks have been updated to have 3.5mm shock shafts, updated bladders and slim rubber boots.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E1068 Mugen Seiki Wing (White)

17,40 €

Últimos artigos em stock

This is an optional Mugen Seiki Lightweight High Down Force Wing. This wing is IFMAR legal and designed to provide high downforce, without the high CG's.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0829 Mugen Seiki Anti-Roll Bar Link (4)

10,60 €

Últimos artigos em stock

This is a set of four replacement Mugen Anti-Roll Bar Links, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0240 Mugen 1mm Wide Offset Wheel Hubs

12,00 €

Últimos artigos em stock

This is a set of two Mugen 1mm wide offset wheel hubs and are intended for use with the Mugen MBX6 1/8 scale buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0171 Mugen Seiki 3.0mm Rear Anti-Roll Bar

11,50 €

Últimos artigos em stock

This is a Mugen 3.0mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Mugen Seiki Front Damper Spring (Medium, 75mm, 9.25T) (2)

11,00 €

Últimos artigos em stock

This is a set of two medium front shock springs from Mugen and are intended for use with the Mugen MBX6. These springs are 75mm in length, and have 9.25 Turns.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2704 Mugen Seiki Mod 1 Pinion Gear (18T)

14,90 €

Últimos artigos em stock

Mugen Mod 1 Pinion Gear. These pinion gears are available in a variety of tooth count options to get the gear ratio of your ECO vehicle dialed for any track condition.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E1069 Mugen Seiki Wing (Yellow)

18,05 €

Últimos artigos em stock

This is an optional Mugen Seiki Lightweight High Down Force Wing. This wing is IFMAR legal and designed to provide high downforce, without the high CG's.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2259 Mugen MBX8 ECO HTD Plastic Spur Gear (46T)

15,80 €

Últimos artigos em stock

This is a replacement Mugen 46 Tooth MBX8 ECO HTD Plastic Spur Gear.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E08368 Mugen Seiki 52mm Steering Tie Rod Turnbuckle (2)

E0838 Mugen Seiki 52mm Steering Tie Rod Turnbuckle (2)

13,10 €

Últimos artigos em stock

This is a replacement Mugen Steering Tie Rod Set, intended for use with the Mugen MBX7 and MBX6R 1/8 buggy. These turnbuckles feature a small adjuster hole to tighten or loosen the rods once installed.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2508 Mugen Front Shock Spring 1.5 L70/8.0T (1pr): X8, X8T

15,99 €

Últimos artigos em stock

Mugen Seiki 70mm Front Shock Spring Set (Medium - 1.5/8.0T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0172 Mugen Seiki 3.2mm Rear Anti-Roll Bar

11,50 €

Últimos artigos em stock

This is a Mugen 3.2mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0578 Mugen Big Bore Rear Damper Spring Set (XX Hard - 1.5/7.75T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2115 Mugen Seiki Front Lower Arm Hinge Pin (2)

6,35 €

Últimos artigos em stock

This is a pack of two replacement Mugen Front Lower Arm Hinge Pins, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Mugen MBX8 REAR LOWER ARM MOUNT R -E2176

32,10 €

Últimos artigos em stock

Mugen MBX8 REAR LOWER ARM MOUNT R -E2176

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2218 Mugen Seiki Front Universal Set

62,50 €

Últimos artigos em stock

This is a replacement Mugen Front Universal Set. These redesigned universal drive shafts are for use with the MUGE2129 front uprights and require a 8x16x5mm ball bearing.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0582 Mugen Big Bore Rear Damper Spring Set (Soft - 1.5/8.75T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes