Peças para marca Mugen Seiki, modelos MTX6R, MRX6, MBX8WE, MBX8E, MGT7, MBX8T, MBX7R. (3)

E2509 Mugen Front Shock Spring 1.5 L70/7.75T (1pr): X8, X8T

15,99 €

Últimos artigos em stock

Mugen Seiki 70mm Front Shock Spring Set (Hard - 1.5/7.75T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0175 Mugen Seiki 2.1mm Front Anti Sway Bar

11,30 €

Últimos artigos em stock

This is a Mugen 2.1mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0257 Mugen Seiki S5 Silicon O-Ring Set (10)

7,35 €

Últimos artigos em stock

This is a replacement Mugen S5 Silicon O-Ring Set, and is intended for use with the Mugen MBX family of vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2514 Mugen Seiki Shock Ball Joints + Parts: MTC1

12,95 €

This is a replacement Mugen MTC1 Shock Ball Joint Set. A2514

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2515 Mugen Front Damper Spring 1.6 L70/9.5T: X8, X8T

15,99 €

Últimos artigos em stock

Mugen Seiki 70mm Front Shock Spring Set (X Soft - 1.6/9.5T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2816 Mugen Seiki MBX7T Fuel Tank

22,44 €

This is a replacement Mugen MBX7T Fuel Tank.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0183 Mugen Seiki Rebound Stop Adjusting Screw

7,60 €

Últimos artigos em stock

This is a set of five replacement Mugen Seki rebound stop adjustment screws (droop screws) and are intended for use with the Mugen MBX6T 1/8 Truck.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0225 Mugen Seiki Joint Cup

13,70 €

Últimos artigos em stock

This is a Mugen joint cup, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2150 Mugen MBX8 Aluminum Front/Rear Lower Arm Mount

24,50 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the rear location

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0575 Mugen B.Bore Rear Damper Spring Set (Medium - 1.5/8.50T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0170 Mugen Seiki 2.9mm Rear Anti-Roll Bar

11,50 €

Últimos artigos em stock

This is a Mugen 2.9mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Mugen Seiki Front Damper Spring (Hard, 75mm, 9.0T) (2)

11,00 €

Últimos artigos em stock

This is a set of two hard front shock springs from Mugen and are intended for use with the Mugen MBX6. These springs are 75mm in length, and have 9 Turns.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0243 Mugen Seiki Aluminum Joint Cup (2)

16,50 €

Últimos artigos em stock

This is a set of two optional Mugen aluminum front or rear axle shafts, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2144 Mugen Seiki MTC1 Aluminum Lower Arm Mount (2)

13,99 €

This is an optional set of Mugen Seiki Aluminum MTC1 Lower Arm Mounts, intended for use with the MTC1 Competition 1/10 Electric Touring Car Kit as a replacement for the stock plastic mounts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0576 Mugen Big Bore Rear Damper Spring Set (Hard - 1.5/8.25T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2707 Mugen Seiki Clutch Thrust Bearing Stopper

2,86 €

This is a replacement Mugen Clutch Thrust Bearing Stopper, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0814 Mugen Seiki Ball Link 7mm

5,15 €

Últimos artigos em stock

This is a set of replacement plastic ball ends for the Mugen MBX truggy. These are used for the steering linkage and connect the front hubs to the steering ackerman

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2507 Mugen Front Shock Spring 1.5 L70/8.25T (1pr): X8, X8T

15,99 €

Últimos artigos em stock

This is an optional Mugen 70mm Front Shock Spring Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. These springs are 70mm in length and are made from 1.5mm wire. This 8.25T spring rate is slightly softer than the 8.0T front springs included with the MBX7.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0319 Mugen Seiki Brake Pad (4)

41,20 €

Últimos artigos em stock

This is a set of four replacement Mugen Brake Pads, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2143 Mugen Seiki MBX8 Center Differential Mount

19,60 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Center Differential Mount. .

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2235 0.8M 2nd Gear Pinion 24T: MRX6X Mugen Seiki Racing

18,00 €

H2235 0.8M 2nd Gear Pinion 24T: MRX6X Mugen Seiki Racing

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

This is a replacement Mugen Carbon MTC2 Front Lower Arm

A2147F Mugen Seiki Carbon MTC2 Front Lower Arm

23,00 €

This is a replacement Mugen Carbon MTC2 Front Lower Arm

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0855 Mugen Seiki Plastic Ball End

7,70 €

This is a pack of ten replacement plastic ball ends for Mugen buggies and trucks, and fits the Mugen MBX5 buggies as well as the MBX5T trucks.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2121 Mugen Seiki Front Upright

6,75 €

This is a replacement Mugen Front Upright, and is intended for use with the Mugen MRX5. This upright can be used on either the Right or Left side of the car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2127 Mugen Seiki Rear Lower Suspension Shaft Set (2)

6,70 €

This is a replacement Mugen Rear Lower Suspension Shaft Set, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2815 Mugen Seiki Aluminum Throttle Servo Horn

28,69 €

This is an optional Mugen Seiki Aluminum Throttle Servo Horn. This servo horn is made from high quality A7075 aluminum and provides a more direct brake feel.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T0247 Mugen Seiki Driveshaft For Universal (MTX3/4)

26,93 €

This is a set of two replacement universal drive shafts from Mugen Seiki.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2114 Mugen Seiki Anti-Roll Bar Stopper Set (2)

12,65 €

This is a replacement Mugen Anti-Roll Bar Stopper Set, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2221 Mugen Seiki MTC1 Drive Shaft Blade (4)

A2221 Mugen Seiki MTC1/MTC2 Drive Shaft Blade (4)

6,75 €

This is a pack of four replacement Mugen MTC1/MTC2 Drive Shaft Blades.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2252 Mugen Seiki MBX8 Straight Cut Bevel Gear (12T)

17,10 €

This is an optional Mugen 12 Tooth MBX8 Straight Cut Bevel Gear.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2201 Mugen Seiki Differential Case

10,90 €

The Mugen Carbon Front Upright Arms offer improved initial steering response, and makes the vehicle more stable through the middle and exit of the corner. They also help to reduce bump steer and make the vehicle more predictable in bumpy conditions.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2402-B Mugen Front Bumper And Body Mounts : MTX6R/6/5

15,90 €

T2402-B Mugen Front Bumper And Body Mounts : MTX6R/6/5.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2224 Mugen Seiki MTC1 Aluminum Rear Wheel Axle (2)

A2224 Mugen Seiki MTC1/MTC2 Aluminum Rear Wheel Axle (2)

13,40 €

This is a replacement Mugen Seiki MTC1/MTC2 Belt Tensioner Set. This set includes the necessary hardware and bearings.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2105 Mugen Seiki Front Lower Arm Hinge Pin Set (2)

7,05 €

This is a replacement Mugen Front Lower Arm Hinge Pin Set, and is intended for use with the Mugen MRX5.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2119- Mugen B Rear Lower Suspension Arm L/R (Hard): MTX6R

T2119-B Mugen B Rear Lower Suspension Arm L/R (Hard): MTX6R

10,80 €

T2119- Mugen B Rear Lower Suspension Arm L/R (Hard): MTX6R.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2410 Mugen Seiki MTC1/MTC2 Body Height Adjuster

22,75 €

This is a replacement Mugen MTC1/MTC2 Body Height Adjuster Set.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2722 Clutch Shoe H.D. (V2)

23,20 €

Mugen MRX6 Clutch Shoe. Package includes one black centax clutch shoe.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0515 Mugen 1.8mm Front Damper Springs (Yellow) (2)

14,40 €

This is a set of two optional Mugen Seiki 1.8mm Front Damper Springs, and are intended for use with the Mugen MRX5 and MRX4 line of 1/8 scale on road cars.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2246B Mugen Seiki O-RING S9x1 (10PCS)

6,35 €

A2246B Mugen Seiki O-RING S9x1 (10PCS)

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2219 Mugen Seiki Rear Universal Set

62,50 €

This is a replacement Mugen Rear Universal Set. These redesigned universal drive shafts are must be used with the MUGE2131 uprights and require a 8x16x5mm ball bearing. The length of the drive shaft is 89.5mm.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes