Peças para marca Mugen Seiki, modelos MTX6R, MRX6, MBX8WE, MBX8E, MGT7, MBX8T, MBX7R. (6)

T2124-B Mugen Seiki Front Lower Arm Mount Bushing & Shim Set

T2124-C Mugen Seiki Front Lower Arm Mount Bushing & Shim Set

11,55 €

This is a replacement Mugen Front Lower Arm Mount Bushing and Shim Set.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2515 Mugen Seiki Shock Membrane (4pcs) MTC1

A2515 Mugen Seiki MTC1/MTC2 Shock Membrane (4)

9,45 €

Últimos artigos em stock

A2515 Mugen Seiki Shock Membrane (4pcs) MTC1/MTC2

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2231 Polished & Knurled Front Wheel Changing Lever (2pcs): MRX

17,55 €

Últimos artigos em stock

H2231 Polished & Knurled Front Wheel Changing Lever (2pcs): MRX

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0558 Mugen Seiki Damper Piston (1.2mm)

8,55 €

Últimos artigos em stock

This is a set of 1.2mm shock pistons for the Mugen MTX and MRX on road cars..

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2227 Mugen Seiki MRX6 2-Speed Gear Box Shoe

11,60 €

Mugen MRX6 2-Speed Gear Box Shoe. These are the replacement MRX6 gear box shoes.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2213 Mugen Seiki 1st Gear Housing

37,30 €

Últimos artigos em stock

This is a replacement Mugen 1st Gear Housing, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2110 2-Speed Shaft Bracket: MRX5 - Mugen Seiki Racing

14,15 €

H2110 2-Speed Shaft Bracket: MRX5 - Mugen Seiki Racing

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2130 Mugen Seiki 1.1mm MTC1 Front Anti-Roll Bar

7,05 €

This is an optional Mugen 1.1mm MTC1 Front Anti-Roll Bar. The standard kit front bar is 1.3mm.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

B0226 Starter Ring BII/III, RII/III

8,05 €

This is a replacement starter wheel for the Mugen Pro Starter BII and RII starter boxes.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0293 Mugen Seiki Belt Tensioner Shaft (MRX/MTX)

7,25 €

Últimos artigos em stock

This is a replacement belt tensioner shaft from Mugen Seiki.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2432 MUGEN CHASSIS X8R NITRO

100,50 €

E2432 MUGEN CHASSIS X8R NITRO

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T0804 Mugen Seiki Titanium Steering Rod (MTX3/4) (2)

29,00 €

Últimos artigos em stock

This is a set of two optional titanium steering rods from Mugen Seiki.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2601-1 Mugen Seiki 5x10x4mm NMB Bearing (10)

47,45 €

Últimos artigos em stock

This is a pack of ten optional Mugen 5x10x4mm NMB Bearings. These bearings are intended to be used as clutch bell bearings and are a higher grade than the stock bearings, increasing performance and durability for both on and off-road conditions.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2242 Adjustable Front One-way Set: MTX6R

88,85 €

This is the New Adjustable Front Oneway for the Mugen Seiki MTX6R. The T2242 adjustable front one-way allows racers to have the benefits of using a one-way to increase steering and still having stability under braking.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0164 Mugen Seiki MRX5 Roll Bar

18,20 €

Últimos artigos em stock

H0164 Roll Bar: MRX5

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2604 Bearings 3 x 8 x 4mm (2pcs): MTC2

6,90 €

A2604 Bearings 3 x 8 x 4mm (2pcs): MTC2

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2131 Mugen Seiki 1.2mm MTC1 Front Anti-Roll Bar

7,05 €

This is an optional Mugen 1.1mm MTC1 Front Anti-Roll Bar. The standard kit front bar is 1.3mm.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2309 Alum Steering Collar 2pcs: MTC1

12,70 €

A2309 Alum Steering Collar 2pcs: MTC1.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2312 Mugen Seiki Brake Disc

20,70 €

Últimos artigos em stock

This is a replacement Mugen Brake Disc.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0563 Mugen Rear Damper Spring (X Soft, 86mm, 10.75T) (2)

15,55 €

Últimos artigos em stock

This is a set of two extra soft rear shock springs from Mugen. These springs are 86mm in length, and have 10.75 Turns.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2529 Mugen Seiki 16mm Rear Damper Set

88,50 €

Últimos artigos em stock

This is a replacement Mugen 16mm Rear Damper Set. This set includes the necessary parts to assemble two complete rear shocks, minus springs. These shocks have been updated to have 3.5mm shock shafts, updated bladders and slim rubber boots.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0228 Mugen Front/Rear Differential Cup Outdrive (2)

15,20 €

Últimos artigos em stock

For use with the MBX6 and MBX7 family of vehicles. These outdrives are for use in both the front and rear differentials.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2152 Mugen Seiki MBX8 Aluminum Rear/Rear Lower Arm Mount

45,50 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the rear gearbox, in the rear location.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0803 Mugen Seiki Fuel Tank Bushing

3,40 €

Últimos artigos em stock

This is a set of replacement rubber fuel tank bushings for the Mugen MBX buggies and truggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2121-B Mugen Seiki Aluminum Servo Saver Spacer Set

6,30 €

Últimos artigos em stock

This is a replacement Mugen Aluminum Servo Saver Spacer Set. These are only compatible with the MBX7, when combined with the Mugen Carbon Fiber Upper Plate (MUGE2121).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2508 Mugen Front Shock Spring 1.5 L70/8.0T (1pr): X8, X8T

15,99 €

Últimos artigos em stock

Mugen Seiki 70mm Front Shock Spring Set (Medium - 1.5/8.0T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0240 Mugen 1mm Wide Offset Wheel Hubs

12,00 €

Últimos artigos em stock

This is a set of two Mugen 1mm wide offset wheel hubs and are intended for use with the Mugen MBX6 1/8 scale buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0573 Mugen Seiki Big Bore Front Damper Spring Set (Hard - 1.5/7.75T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Front Damper Spring Set, and is intended for use with the Mugen MBX6, MBX6T and MBX6-E.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2319 Mugen Seiki MBX8 Servo Saver Shaft (2)

16,70 €

Últimos artigos em stock

This is a pack of two replacement Mugen MBX8 Servo Saver Shafts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0572 Mugen Seiki Big Bore Front Damper Spring Set (Medium - 1.5/8.00T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Front Damper Spring Set, and is intended for use with the Mugen MBX6, MBX6T and MBX6-E.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0578 Mugen Big Bore Rear Damper Spring Set (XX Hard - 1.5/7.75T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2119-A Machined Bushing "A" 4pcs (for E2134)

22,54 €

Últimos artigos em stock

Mugen Seiki Machined "A" Rear Hub Carrier Bushing Set. These bushings are compatible with MBX7 vehicles that are equipped with the optional Aluminum Universal Driveshaft Rear Hub Carriers (MUGE2134).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0571 Mugen Seiki Big Bore Front Damper Spring Set (Soft - 1.5/8.25T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Front Damper Spring Set, and is intended for use with the Mugen MBX6, MBX6T and MBX6-E.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0582 Mugen Big Bore Rear Damper Spring Set (Soft - 1.5/8.75T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2404 Alum. Wing Washer B (F/R Position) 2pcs: X8/E, X8T/E, X7

12,85 €

Últimos artigos em stock

This is an optional Mugen MBX7 Aluminum "B" Front/Rear Position Wing Washers. Machined from 7075 aluminum and hard coated for durability, these aluminum washers look awesome and will hold the wing more securely.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2146 Mugen Seiki Non-Trailing Front Hub Carrier Set

13,80 €

Últimos artigos em stock

This is an optional Mugen Seiki Non-Trailing Front Hub Carrier Set, for use with the MBX7 family of buggies, trucks, and GT. Package includes one left and right side, as well as four inserts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E08368 Mugen Seiki 52mm Steering Tie Rod Turnbuckle (2)

E0838 Mugen Seiki 52mm Steering Tie Rod Turnbuckle (2)

13,10 €

Últimos artigos em stock

This is a replacement Mugen Steering Tie Rod Set, intended for use with the Mugen MBX7 and MBX6R 1/8 buggy. These turnbuckles feature a small adjuster hole to tighten or loosen the rods once installed.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E1068 Mugen Seiki Wing (White)

17,40 €

Últimos artigos em stock

This is an optional Mugen Seiki Lightweight High Down Force Wing. This wing is IFMAR legal and designed to provide high downforce, without the high CG's.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2517 Mugen Front Damper Spring 1.6 L70/9.0T: X8,X7

15,50 €

Últimos artigos em stock

Mugen Seiki 70mm Front Shock Spring Set (Medium - 1.6/9.0T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Mugen Seiki Front Damper Spring (Medium, 75mm, 9.25T) (2)

11,00 €

Últimos artigos em stock

This is a set of two medium front shock springs from Mugen and are intended for use with the Mugen MBX6. These springs are 75mm in length, and have 9.25 Turns.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0702 Mugen Seiki Nitro 3-Shoe Flywheel

17,95 €

Últimos artigos em stock

This is a replacement stock engine flywheel for the Mugen MBX family of buggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E1069 Mugen Seiki Wing (Yellow)

18,05 €

Últimos artigos em stock

This is an optional Mugen Seiki Lightweight High Down Force Wing. This wing is IFMAR legal and designed to provide high downforce, without the high CG's.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2518 Mugen Front Damper Spring 1.6 L70/8.75T: X8, X8T

15,99 €

Últimos artigos em stock

Mugen Seiki 70mm Front Shock Spring Set (Hard - 1.6/8.75T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2148 Tension Rod, Body Mount, Front Upper Plate: X8/E, X8T/E

20,40 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Body Mount and Front Upper Plate Set.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0171 Mugen Seiki 3.0mm Rear Anti-Roll Bar

11,50 €

Últimos artigos em stock

This is a Mugen 3.0mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0556 Mugen Rear Damper Spring (Hard, 86mm, 10.0T) (2)

15,55 €

Últimos artigos em stock

This is a set of two hard rear shock springs from Mugen and are intended for use with the Mugen MBX. These springs are 86mm in length, and have 10 Turns.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes