Peças para marca Mugen Seiki, modelos MTX6R, MRX6, MBX8WE, MBX8E, MGT7, MBX8T, MBX7R. (6)

A2604 Bearings 3 x 8 x 4mm (2pcs): MTC2

6,90 €

A2604 Bearings 3 x 8 x 4mm (2pcs): MTC2

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2316 Mugen Seiki Servo Saver Spring (Hard)

4,75 €

Últimos artigos em stock

This is a replacement Mugen Servo Saver Spring. This "Hard" tension spring is the standard spring included with the MGT7 and MGT7E kits.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2116 Mugen Seiki Anti-Roll Bar Pivot Ball Set (2)

4,45 €

Últimos artigos em stock

This is a replacement Mugen Anti-Roll Bar Pivot Ball Set, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2211 Mugen Seiki 2-Speed Adapter

8,00 €

Últimos artigos em stock

This is a replacement Mugen 2-Speed Adapter, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Mugen Seiki Ackerman Plate (5 Hole)

14,95 €

Últimos artigos em stock

This is a replacement Mugen Ackerman Plate. This redesigned steering ackerman plate has 5 adjustment holes for maximum steering adjustability.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2804-A Mugen Seiki Mrx6 MTX7 Tensioner Bushing (2)

8,95 €

Últimos artigos em stock

H2804-A Mugen Seiki Mrx6,MTX7 Tensioner Bushing (2) This is a replacement Mugen.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2236 0.8M 2nd Gear Pinion 25T: MRX6X Mugen Seiki Racing

18,30 €

H2236 0.8M 2nd Gear Pinion 25T: MRX6X Mugen Seiki Racing

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2130 Mugen Seiki 1.1mm MTC1 Front Anti-Roll Bar

7,05 €

This is an optional Mugen 1.1mm MTC1 Front Anti-Roll Bar. The standard kit front bar is 1.3mm.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0603 Mugen 5x10mm Belt Tensioner Flanged Bearing (2)

14,90 €

Últimos artigos em stock

This is a set of two replacement 5x10mm flanged belt tensioner bearings from Mugen Seiki.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2131 Mugen Seiki Front Upright Upper Plate B Set (2)

21,50 €

Últimos artigos em stock

This is an optional Mugen Front Upright Upper Plate B Set, and is intended for use with the Mugen MTX5. These offer two setup options.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2212 Mugen Seiki Front Wheel Axle (2pcs) MTC1/MTC2

16,85 €

Últimos artigos em stock

A2212 Mugen Seiki Front Wheel Axle (2pcs) MTC1/MTC2.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2143 Mugen Seiki MTC1 C-Hub Metal Bushing (4)

10,35 €

Mugen MTC1 C-Hub Metal Bushings are used with MUGA2141L/R aluminum front c-hub carriers for the MTC1.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0144 Mugen Seiki King Pin Ball Cup

7,55 €

Últimos artigos em stock

This is a replacement king pin ball cup set from Mugen Seiki. These ball cups go between the pillow ball, and the upright adjusting nuts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2309 Alum Steering Collar 2pcs: MTC1

12,70 €

A2309 Alum Steering Collar 2pcs: MTC1.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2117 Mugen Seiki Anti-Roll Bar Adjusting Nut Set (2)

10,10 €

Últimos artigos em stock

This is a replacement Mugen Anti-Roll Bar Adjusting Nut Set, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2212 Mugen Seiki 2-Speed Clutch Shoe

7,85 €

Últimos artigos em stock

This is a replacement Mugen 2-Speed Clutch Shoe, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2201-D Mugen Seiki Differential Case & Pulley Set

13,55 €

Últimos artigos em stock

T2201-D Mugen Seiki Differential Case & Pulley Set This is a replacement Mugen.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

This is a replacement Mugen MTC2 Pulley with Parts Set

A2235 Mugen Seiki MTC2 Pulley Parts Set

13,20 €

This is a replacement Mugen MTC2 Pulley with Parts Set (1pc)

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2131 Mugen Seiki 1.2mm MTC1 Front Anti-Roll Bar

7,05 €

This is an optional Mugen 1.1mm MTC1 Front Anti-Roll Bar. The standard kit front bar is 1.3mm.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2119-A Machined Bushing "A" 4pcs (for E2134)

22,54 €

Últimos artigos em stock

Mugen Seiki Machined "A" Rear Hub Carrier Bushing Set. These bushings are compatible with MBX7 vehicles that are equipped with the optional Aluminum Universal Driveshaft Rear Hub Carriers (MUGE2134).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0562 Mugen Rear Damper Spring (XX Soft, 86mm, 11.0T) (2)

15,55 €

Últimos artigos em stock

This is a set of two extra extra soft rear shock springs from Mugen. These springs are 86mm in length, and have 11 Turns.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2404 Alum. Wing Washer B (F/R Position) 2pcs: X8/E, X8T/E, X7

12,85 €

Últimos artigos em stock

This is an optional Mugen MBX7 Aluminum "B" Front/Rear Position Wing Washers. Machined from 7075 aluminum and hard coated for durability, these aluminum washers look awesome and will hold the wing more securely.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0572 Mugen Seiki Big Bore Front Damper Spring Set (Medium - 1.5/8.00T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Front Damper Spring Set, and is intended for use with the Mugen MBX6, MBX6T and MBX6-E.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0803 Mugen Seiki Fuel Tank Bushing

3,40 €

Últimos artigos em stock

This is a set of replacement rubber fuel tank bushings for the Mugen MBX buggies and truggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2529 Mugen Seiki 16mm Rear Damper Set

88,50 €

Últimos artigos em stock

This is a replacement Mugen 16mm Rear Damper Set. This set includes the necessary parts to assemble two complete rear shocks, minus springs. These shocks have been updated to have 3.5mm shock shafts, updated bladders and slim rubber boots.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0864B Mugen Seiki Fuel Tank Cap

10,65 €

Últimos artigos em stock

This is a replacement Mugen Seiki Fuel Tank Cap. This cap fits the tanks equipped on the MBX, MRX and MTX series of nitro vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E08368 Mugen Seiki 52mm Steering Tie Rod Turnbuckle (2)

E0838 Mugen Seiki 52mm Steering Tie Rod Turnbuckle (2)

13,10 €

Últimos artigos em stock

This is a replacement Mugen Steering Tie Rod Set, intended for use with the Mugen MBX7 and MBX6R 1/8 buggy. These turnbuckles feature a small adjuster hole to tighten or loosen the rods once installed.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0563 Mugen Rear Damper Spring (X Soft, 86mm, 10.75T) (2)

15,55 €

Últimos artigos em stock

This is a set of two extra soft rear shock springs from Mugen. These springs are 86mm in length, and have 10.75 Turns.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0571 Mugen Seiki Big Bore Front Damper Spring Set (Soft - 1.5/8.25T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Front Damper Spring Set, and is intended for use with the Mugen MBX6, MBX6T and MBX6-E.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2115 Mugen Seiki Front Lower Arm Hinge Pin (2)

6,35 €

Últimos artigos em stock

This is a pack of two replacement Mugen Front Lower Arm Hinge Pins, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0171 Mugen Seiki 3.0mm Rear Anti-Roll Bar

11,50 €

Últimos artigos em stock

This is a Mugen 3.0mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2139 Mugen Front Track Width Adj. Spacer (0.5mm) 4pcs

6,35 €

Últimos artigos em stock

This is a pack of four replacement Mugen 0.5mm Aluminum Front Track Width Spacers.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2121-B Mugen Seiki Aluminum Servo Saver Spacer Set

6,30 €

Últimos artigos em stock

This is a replacement Mugen Aluminum Servo Saver Spacer Set. These are only compatible with the MBX7, when combined with the Mugen Carbon Fiber Upper Plate (MUGE2121).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0172 Mugen Seiki 3.2mm Rear Anti-Roll Bar

11,50 €

Últimos artigos em stock

This is a Mugen 3.2mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Mugen Seiki Front Damper Spring (Medium, 75mm, 9.25T) (2)

11,00 €

Últimos artigos em stock

This is a set of two medium front shock springs from Mugen and are intended for use with the Mugen MBX6. These springs are 75mm in length, and have 9.25 Turns.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0578 Mugen Big Bore Rear Damper Spring Set (XX Hard - 1.5/7.75T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E1068 Mugen Seiki Wing (White)

17,40 €

Últimos artigos em stock

This is an optional Mugen Seiki Lightweight High Down Force Wing. This wing is IFMAR legal and designed to provide high downforce, without the high CG's.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0228 Mugen Front/Rear Differential Cup Outdrive (2)

15,20 €

Últimos artigos em stock

For use with the MBX6 and MBX7 family of vehicles. These outdrives are for use in both the front and rear differentials.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0582 Mugen Big Bore Rear Damper Spring Set (Soft - 1.5/8.75T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2508 Mugen Front Shock Spring 1.5 L70/8.0T (1pr): X8, X8T

15,99 €

Últimos artigos em stock

Mugen Seiki 70mm Front Shock Spring Set (Medium - 1.5/8.0T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E1069 Mugen Seiki Wing (Yellow)

18,05 €

Últimos artigos em stock

This is an optional Mugen Seiki Lightweight High Down Force Wing. This wing is IFMAR legal and designed to provide high downforce, without the high CG's.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0240 Mugen 1mm Wide Offset Wheel Hubs

12,00 €

Últimos artigos em stock

This is a set of two Mugen 1mm wide offset wheel hubs and are intended for use with the Mugen MBX6 1/8 scale buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0702 Mugen Seiki Nitro 3-Shoe Flywheel

17,95 €

Últimos artigos em stock

This is a replacement stock engine flywheel for the Mugen MBX family of buggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2146 Mugen Seiki Non-Trailing Front Hub Carrier Set

13,80 €

Últimos artigos em stock

This is an optional Mugen Seiki Non-Trailing Front Hub Carrier Set, for use with the MBX7 family of buggies, trucks, and GT. Package includes one left and right side, as well as four inserts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2152 Mugen Seiki MBX8 Aluminum Rear/Rear Lower Arm Mount

45,50 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the rear gearbox, in the rear location.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2517 Mugen Front Damper Spring 1.6 L70/9.0T: X8,X7

15,50 €

Últimos artigos em stock

Mugen Seiki 70mm Front Shock Spring Set (Medium - 1.6/9.0T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

B0430 MUGEN SEIKI SERVO HORN MOUNTS FOR B0429

5,95 €

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0556 Mugen Rear Damper Spring (Hard, 86mm, 10.0T) (2)

15,55 €

Últimos artigos em stock

This is a set of two hard rear shock springs from Mugen and are intended for use with the Mugen MBX. These springs are 86mm in length, and have 10 Turns.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes