Peças para marca Mugen Seiki, modelos MTX6R, MRX6, MBX8WE, MBX8E, MGT7, MBX8T, MBX7R.

E2167 Mugen Rear Lower Arm Plate CFRP :X8T, X8TE

35,15 €

Não há produtos suficientes em stock

Mugen MBX8T/MBX8TE Graphite Rear Lower Suspension Arm Plates are a direct installation upgrade for the stock plastic arm plates included with the model.

Detalhes

Ver detalhes

E2709 Mugen Seiki 4-Shoe Clutch System

57,60 €

Não há produtos suficientes em stock

This is the Mugen Seiki 4-Shoe Clutch System. This clutch system utilizes a fourth clutch shoe over the previous 3-shoe system all 1/8 off-road vehicles used.

Detalhes

Ver detalhes

E0210 Mugen Seiki 3x16.8 Wheel Hub Pins (8pc)

6,55 €

Não há produtos suficientes em stock

This is a pack of 8 3x16.8mm wheel hub pins for the Mugen MBX5 family of buggies. These are the small pins that are used to secure the wheel hubs to the axle drive shafts on the buggy.

Detalhes

Ver detalhes

E0574 Mugen Seiki Big Bore Front Damper Spring Set (X Hard - 1.5/7.50T) (2)

16,50 €

Não há produtos suficientes em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Detalhes

Ver detalhes

E2134 Mugen Aluminum Rear Hub Carrier Set (for Universals)

127,40 €

Não há produtos suficientes em stock

This is a pack of two optional Mugen Seiki Aluminum Rear Hub Carriers. These aluminum carriers are designed for use with the updated Universal Driveshafts (MUGE2219) found on the MBX7R and use the 8x16mm bearing (MUGC0601).

Detalhes

Ver detalhes

E2309 Mugen Seiki Brake Disc (2)

32,15 €

Não há produtos suficientes em stock

This is a pack of two replacement Mugen Brake Discs, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Detalhes

Ver detalhes

E2802 Mugen Seiki Fuel Splash & Mud Guard Set

10,10 €

Não há produtos suficientes em stock

This is a replacement Mugen Fuel Splash & Mud Guard Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Detalhes

Ver detalhes

E0236 Mugen Seiki Universal Joint Boots (2)

5,90 €

Não há produtos suficientes em stock

This is a set of two replacement Mugen universal joint boots, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Detalhes

Ver detalhes

DIFFERENTIAL KOMPLETT VA/HA 46T TRUGGY (HT DIFF.)

76,25 €

Não há produtos suficientes em stock

Detalhes

Ver detalhes

E0162 Mugen Front Upper Suspension Arm Shaft (2)

6,35 €

Não há produtos suficientes em stock

This is a set of replacement Mugen front upper suspension arm shafts, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Detalhes

Ver detalhes

E2153 Mugen Seiki Carbon Front Upright Arm (2)

22,50 €

Não há produtos suficientes em stock

This is a pack of two optional Mugen Carbon Front Upright Arms. These updated carbon front upright arms are used with MUGE2146 and MUGE2147 front uprights.

Detalhes

Ver detalhes

E2510 Mugen Front Shock Spring 1.5 L70/7.5T (1pr): X8, X8T

15,99 €

Não há produtos suficientes em stock

Mugen Seiki 70mm Front Shock Spring Set (X Hard - 1.5/7.5T) (2).

Detalhes

Ver detalhes

E2804 Mugen Seiki Camber Link Pivot Ball (4)

9,08 €

Não há produtos suficientes em stock

This is a pack of four Mugen Camber Link Pivot Balls, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy. These pivot balls are used in the steering assembly and rear camber links.

Detalhes

Ver detalhes

E0241 Mugen Seiki 2mm Wide Offset Wheel Hubs

12,25 €

Não há produtos suficientes em stock

This is a set of two Mugen 2mm wide offset wheel hubs and are intended for use with the Mugen MBX6 1/8 scale buggy.

Detalhes

Ver detalhes

E1081-B Mugen Seiki Wing (White)

17,60 €

Não há produtos suficientes em stock

This is an optional Mugen Seiki Lightweight High Down Force Wing. This wing is IFMAR legal and designed to provide high downforce, without the high CG's.

Detalhes

Ver detalhes

E0219 Mugen Seiki Self Locking Wheel Nut (4)

19,75 €

Não há produtos suficientes em stock

This is a set of four optional Mugen self locking wheel nuts and are intended for use with Mugen 1/8 scale off road vehicles.

Detalhes

Ver detalhes

E2324 Mugen Seiki MBX8 Battery Connector Holder

20,95 €

Não há produtos suficientes em stock

This is the Mugen MBX8 Battery Connector Holder for the MBX8 buggy. This holder can also be used with the nitro truggy, as well as the nitro MGT7.

Detalhes

Ver detalhes

E2524 Mugen Seiki 16mm Diaphragm (4)

9,50 €

Não há produtos suficientes em stock

This is a pack of four replacement Mugen 16mm Diaphragms.

Detalhes

Ver detalhes

E2821 Mugen Seiki MBX8 Titanium Upper Screw Set A

102,82 €

Não há produtos suficientes em stock

This is the optional Mugen Titanium Upper Screw Set A for the MBX8T and MBX8TE 1/8 scale truggies. This set includes only screws used on the upper half of the vehicle. Mugen offers the "Lower" Screw Set separately (MUGE2822).

Detalhes

Ver detalhes

E0242 Mugen Seiki Aluminum F/R Axle Shaft (2)

21,35 €

Não há produtos suficientes em stock

This is a set of two optional Mugen aluminum front or rear axle shafts, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Detalhes

Ver detalhes

E1081-B Mugen Seiki Wing (Yellow)

17,60 €

Não há produtos suficientes em stock

This is an optional Mugen Seiki Lightweight High Down Force Wing. This wing is IFMAR legal and designed to provide high downforce, without the high CG's.

Detalhes

Ver detalhes

E0229 Mugen Center Differential Outdrive Cup

15,85 €

Não há produtos suficientes em stock

This is a set of replacement center differential cups for the Mugen MBX family of buggies.

Detalhes

Ver detalhes

E2522 Mugen Seiki 16mm Damper Cap (2)

23,85 €

Não há produtos suficientes em stock

This is a pack of two replacement Mugen 16mm Damper Caps.

Detalhes

Ver detalhes

E2528 Mugen Seiki 16mm Front Damper Set

84,80 €

Não há produtos suficientes em stock

This is a replacement Mugen 16mm Front Damper Set. This set includes the necessary parts to assemble two complete front shocks, minus springs. These shocks have been updated to have 3.5mm shock shafts, updated bladders and slim rubber boots.

Detalhes

Ver detalhes

E2822 Mugen Seiki MBX8 Titanium Lower Screw Set B

39,90 €

Não há produtos suficientes em stock

This is the optional Mugen Titanium Lower Screw Set A for the MBX8T and MBX8TE 1/8 scale truggies. This set includes only screws used on the lower half of the vehicle. Mugen offers the "Upper" Screw Set separately (MUGE2821).

Detalhes

Ver detalhes

E0520 Mugen Seiki Oil Seal Set (16)

12,60 €

Não há produtos suficientes em stock

This is a pack of sixteen replacement oil shock seals, that are used to rebuild the shocks. These seals form the seal at the end of the shock body between the shock body and the shock shafts.

Detalhes

Ver detalhes

E2183 Mugen MBX8 Rear Lower Suspension Arm Set

19,05 €

Não há produtos suficientes em stock

This is a replacement Mugen MBX8 Rear Lower Suspension Arm Set. This set also includes the plastic arm inserts, but no mounting hardware.

Detalhes

Ver detalhes

E0554 Mugen Rear Damper Spring (Soft, 86mm, 10.5T) (2)

15,55 €

Não há produtos suficientes em stock

This is a set of two rear shock springs from Mugen and are intended for use with the Mugen MBX. These springs are 86mm in length, and have 10.5 Turns.

Detalhes

Ver detalhes

E2526 Mugen Seiki 16mm Front Damper Case (2)

41,50 €

Não há produtos suficientes em stock

This is a pack of two replacement Mugen 16mm Front Damper Cases.

Detalhes

Ver detalhes

MIP Mugen 16mm 6 Hole Bypass1 Piston Set (4)

Flash Point MIP 16mm 6 Hole Bypass1 Pistons Set (4)

49,55 €

Não há produtos suficientes em stock

The MIP Mugen 16mm 6 Hole Bypass1 Pistons are not like anything you have ever experienced before. MIP Bypass1 pistons are fully customizable and allow you to control your shocks rebound speed. MIP Bypass1 Pistons are also Dyno Tuned to ensure they match the compression characteristics of the stock pistons!

Detalhes

Ver detalhes

H2810 Mugen Seiki MBX8 Fuel Cap Silicone O-Ring (4)

5,40 €

Não há produtos suficientes em stock

This is a pack of four replacement Mugen MBX8 Fuel Cap Silicone O-Rings.

Detalhes

Ver detalhes

E0548 Mugen Seiki Damper Mount (4)

12,95 €

Não há produtos suficientes em stock

This is a set of four replacement Mugen Damper Mounts, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Detalhes

Ver detalhes

E0555 Mugen Rear Damper Spring (Medium, 86mm, 10.25T) (2)

15,50 €

Não há produtos suficientes em stock

This is a set of two medium rear shock springs from Mugen and are intended for use with the Mugen MBX. These springs are 86mm in length, and have 10.25 Turns..

Detalhes

Ver detalhes

E2527 Mugen Seiki 16mm Rear Damper Case (2)

41,20 €

Não há produtos suficientes em stock

This is a pack of two replacement Mugen 16mm Rear Damper Cases.

Detalhes

Ver detalhes

FP2107 FP Aluminum Differential Cross Pins: Mugen, Losi

10,51 €

Não há produtos suficientes em stock

An optional package of six Aluminum Differential Cross Pins.

Detalhes

Ver detalhes

CONICAL SHOCK PISTONS (1.3MM X 8 ANGLED HOLES) (2PCS) 16MM

10,50 €

Não há produtos suficientes em stock

This is a pack of two optional Ultimate Racing 16mm Conical Shock Pistons. These pistons feature eight angled 1.3mm holes that help deliver smoother function during normal use but provide greater resistance on landings.

Detalhes

Ver detalhes

E0602/1 Mugen Seiki 5x10x4mm Bearing (10)

36,80 €

Não há produtos suficientes em stock

This is a set of ten replacement Mugen 5x10x4mm Bearings, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Detalhes

Ver detalhes

E0577 Mugen Big Bore Rear Damper Spring Set (X Hard - 1.5/8.00T) (2)

16,50 €

Não há produtos suficientes em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Detalhes

Ver detalhes

E2536 Mugen Seiki Big Bore Blank Shock Piston (4)

22,30 €

Não há produtos suficientes em stock

This is a pack of four optional Mugen Seiki Big Bore Blank Shock Pistons. Create your own custom piston hole sizes with these blank pistons.

Detalhes

Ver detalhes

E0159 Mugen Seiki Adjusting Nut (4)

14,60 €

Não há produtos suficientes em stock

This is a set of four replacement Mugen adjusting nuts, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Detalhes

Ver detalhes

CONICAL SHOCK PISTONS (1.2MM X 8 ANGLED HOLES) (2PCS) 16mm

10,50 €

Não há produtos suficientes em stock

This is a pack of two optional Ultimate Racing 16mm Conical Shock Pistons. These pistons feature eight angled 1.2mm holes that help deliver smoother function during normal use but provide greater resistance on landings.

Detalhes

Ver detalhes

E0704 Mugen Seiki Aluminum Clutch Shoes (3) (Lightweight)

33,25 €

Não há produtos suficientes em stock

This is an optional set of three Mugen Aluminum Clutch Shoes, and are intended for use with the Mugen MBX family of 1/8 scale vehicles.

Detalhes

Ver detalhes

E1070 Mugen Seiki Wing (Black)

17,40 €

Não há produtos suficientes em stock

This is an optional Mugen Seiki Lightweight High Down Force Wing. This wing is IFMAR legal and designed to provide high downforce, without the high CG's.

Detalhes

Ver detalhes

E2403 Mugen Seiki MBX7 Aluminum "A" Center Position Wing Washer (2)

10,40 €

Não há produtos suficientes em stock

This is an optional Mugen MBX7 Aluminum "A" Center Position Wing Washers. Machined from 7075 aluminum and hard coated for durability, these aluminum washers look awesome and will hold the wing more securely.

Detalhes

Ver detalhes

E0160 Mugen Seiki Front Lower Pillow Ball (2)

22,80 €

Não há produtos suficientes em stock

This is a set of two replacement Front Lower Pillow Balls from Mugen Seiki. These pillow balls screw into the front suspension arms, and hold the steering knuckle on.

Detalhes

Ver detalhes

E2151 Mugen Seiki MBX8 Aluminum Rear/Front Lower Arm Mount

27,50 €

Não há produtos suficientes em stock

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the front location.

Detalhes

Ver detalhes

E0903 Mugen Seiki Spring Mounted Pipe Wire & Mount Set

8,40 €

Não há produtos suficientes em stock

This is a replacement Mugen Spring Mounted Pipe Wire & Mount Set, and is intended for use with the Mugen MBX7 and MBX6R 1/8 buggy, but can also be used with the rest of the Mugen MBX family of vehicles as an optional upgrade.

Detalhes

Ver detalhes

E2131 Mugen Seiki Rear Hub Carrier Set

11,50 €

Não há produtos suficientes em stock

These rear hub carriers has been modified to allow for use of an 8mm x 16mm ball bearing which is required for the redesigned MUGE2219 universal shaft. This hub carrier will also allow the use of the 15mm x 21mm ball bearing too.

Detalhes

Ver detalhes