Peças de reposição, acessórios e opcionais para carros telecomandados. (2)

H0283 Mugen Seiki 50T 1st Gear

6,95 €

This is a replacement Mugen 50 Tooth First Gear, and is intended for use with the Mugen MRX4X 1/8 scale on road car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2420 Mugen Seiki MBX7R Chassis Weight (40g)

21,75 €

This is an optional Mugen 40 Gram Chassis Weight. This weight mounts to the back of the front gearbox or in front of the rear gear box on the MBX7R and MBX7TR nitro vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2813 5mm Aluminum Ball (4pcs): MTC2

15,80 €

5mm Aluminum Ball (4pcs): MTC2

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2719 Mugen Seiki MBX8 Light Weight Clutch Bell (13T)

22,66 €

This is an optional Mugen 13 Tooth MBX8 Light Weight Clutch Bell. This clutch bell features large cut-outs, reducing weight and improving heat dissipation.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0751 Mugen Seiki 0.9mm Clutch Spring Set (3)

5,81 €

This is a set of stock 0.9mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0811-B Mugen Seiki Rear Upper Arm Link (Long)

5,90 €

This is a the new optional long rear upper arm link that comes with the Mugen MBX buggy kits.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2714 Mugen Seiki HD Pinion - 1st Gear (15T)

15,30 €

Mugen HD Pinion gears are an optional upgrade for your MGT7 and MRX6 vehicles developed to improve durability and wear resistance. This 1st gear pinion is available with a 15 or 16 tooth count. Choose the tooth count from the pull down menu above.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2123 Mugen Seiki Steel Kingpin Balls (2)

21,50 €

This is a pack of two optional Mugen Steel Kingpin Balls. These kingpin balls are heavier than the stock parts, and eliminate the need for arm weights.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2124 Mugen Seiki Steel Kingpin Ball Adjusting Nut (2)

12,10 €

This is a pack of two optional Mugen Steel Kingpin Ball Adjusting Nuts. These nuts are heavier than the stock parts, and eliminate the need for arm weights.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0517 Mugen Seiki Front Shock Shaft (2)

11,70 €

This is a pack of two replacement front shock shafts for the Mugen MBX7 and MBX5T truggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0176 Mugen Seiki 2.6mm Rear Anti-Roll Bar

11,40 €

This is a Mugen 2.6mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2242 Mugen Seiki MTC2 Front Rear Drive Belt

6,35 €

This is a replacement Mugen MTC2 Front Rear Drive Belt.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2240 2st Speed Gear 56T 0.8Mod Mugen MRX-6X

7,90 €

H2240 2st Speed Gear 56T 0.8Mod Mugen MRX-6X

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2712 Mugen Seiki Engine Mount Washer Set (4)

6,35 €

This is a pack of four replacement Mugen Engine Mount Washers for use with the MBX8 line of nitro vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2803 Mugen Seiki UNIBALL 1 (4)

10,90 €

This is a pack of six replacement Mugen Seiki 6mm Aluminum Pivot Balls.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2210B Mugen Seiki MRX6 Gear Shaft

15,10 €

Mugen MRX6 Pulley Set. Package includes the replacement plastic pulleys used with the MRX6.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2110 Mugen Seiki Front Graphite Upright Arm

12,98 €

This is a replacement Mugen Front Graphite Upright Arm, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2311 Mugen Seiki Graphite Radio Tray Brace

11,70 €

This is a replacement Mugen Graphite Radio Tray Brace.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2809 Mugen Seiki Rubber Fuel Cap Handle (2)

5,61 €

This is a pack of two replacement Mugen Rubber Fuel Cap Handles, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2124B Mugen Seiki MRX6 Rear Upright (Hard)

10,05 €

Mugen MRX6 Rear Upright. This is the replacement rear upright, and can be used on the right or left side of the chassis.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0858 Mugen Seiki Plastic Ball Link Ends Short 6mm

9,95 €

This is a set of replacement plastic ball ends used on all Mugen MBX, MTX and MRX off-road and on-road cars.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2238 Mugen Seiki MBX8 Diff. Gear 10T (4)

8,90 €

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2132 Mugen Front Upper Suspension Arm Set

13,70 €

These front upper suspension arms have been shortened 1.6mm in length. This will allow the use of the MUGE0161 spacer between the pillar ball and the upper arm. This will allow for the same camber on each side of the buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0238 Mugen Seiki 2.5x14.8mm Universal Joint Pin (4)

6,55 €

This is a set of four replacement Mugen 2.5x14.8mm Universal Joint Pins, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0801H Mugen Seiki Steering Rack Bushings (2)

4,69 €

This is a set of replacement steering rack bushings for the Mugen MBX5 family of buggies. These are the bushings that go into the steering ackerman plate, and connect the ackerman plate to the steering uprights.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2572 Mugen Seiki Emulsion Damper cap (2)

29,40 €

This is a pack of two replacement Mugen 16mm Damper Caps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2142 Mugen Seiki MBX8 Gearbox

17,10 €

This is a replacement Mugen MBX8 Gear Box. This gearbox has been updated to allow you to remove and service the differential without detaching the suspension arm mounts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2707 Mugen Seiki Clutch Thrust Bearing Stopper

2,86 €

This is a replacement Mugen Clutch Thrust Bearing Stopper, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2707 Mugen Seiki 0.8 Clutch Springs (4)

5,30 €

This is a pack of four replacement Mugen 0.8 Clutch Springs for use with the optional Mugen 4-Shoe Clutch System.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2144 Mugen Seiki MTC1 Aluminum Lower Arm Mount (2)

13,99 €

This is an optional set of Mugen Seiki Aluminum MTC1 Lower Arm Mounts, intended for use with the MTC1 Competition 1/10 Electric Touring Car Kit as a replacement for the stock plastic mounts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2409 Mugen Seiki Stone Guard for MBX7/MBX8

16,80 €

This is a plastic set of side / stone guards. X8/E, X7R/E, X7TR/E, GT7

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2708 Mugen Seiki 0.9 Clutch Springs (4)

5,30 €

This is a pack of four replacement Mugen 0.9 Clutch Springs for use with the optional Mugen 4-Shoe Clutch System.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2304 Steering Stopper Collar (3pcs): MTC1

A2304 Mugen Seiki MTC1/MTC2 Steering Stopper Collar (3)

6,75 €

This is a pack of three replacement Mugen MTC1/MTC2 Steering Stopper Collars.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2722 Mugen Seiki MBX8 Clutch Springs 1.0mm (4-shoe)

7,10 €

This is an Mugen MBX8 Clutch Springs 1.0mm (4-shoe).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2816 Mugen Seiki MBX7T Fuel Tank

22,44 €

This is a replacement Mugen MBX7T Fuel Tank.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2235 0.8M 2nd Gear Pinion 24T: MRX6X Mugen Seiki Racing

18,00 €

H2235 0.8M 2nd Gear Pinion 24T: MRX6X Mugen Seiki Racing

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

This is a replacement Mugen Carbon MTC2 Front Lower Arm

A2147F Mugen Seiki Carbon MTC2 Front Lower Arm

23,00 €

This is a replacement Mugen Carbon MTC2 Front Lower Arm

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2147 Mugen 1.5mm Trailing Front Hub Carrier Set

13,80 €

This is an optional Mugen Seiki 1.5mm Trailing Front Hub Carrier Set that can be used with CVA (MUGE0221 & MUGE0224) and universal driveshaft on all the MBX family of buggies, trucks, and GT vehicles. Package includes one left and right side, as well as four inserts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0167 Mugen Seiki 2.6mm Front Anti-Roll Bar

11,30 €

This is a Mugen 2.6mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0753A Mugen Seiki 1.10mm 3-Shoe Clutch Spring Set (3)

5,81 €

This is a set of stock 1.1mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2302 Mugen Seiki Radio Box

16,80 €

This is a replacement Mugen Radio Box, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2230-B Mugen Seiki Differential Gears (HD) MTC1/MTC2

12,95 €

This is a new HD differential gears for the MTC1/MTC2. These gears are made from a new material to improve durability and will allow for a smoother differential operation for a longer period of time.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0813 Mugen Seiki Rear Upper Arm Link

8,05 €

This is the replacement rear upper arm link assembly ends for the Mugen MBX.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2136 Mugen Seiki 2.7mm Front Anti-Roll Bar

12,95 €

Últimos artigos em stock

This is a replacement Mugen 2.7mm Front Anti-Roll Bar. This bar came included as standard equipment with the MGT7 and MGT7E.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0718A Mugen Seiki 1.05mm Clutch Spring Set (3)

9,10 €

Últimos artigos em stock

This is a pack of three optional Mugen 1.05mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2602-1 Mugen Seiki 8x16x5mm NMB Bearing (10)

50,90 €

Últimos artigos em stock

This is a pack of ten replacement Mugen 8x16x5mm NMB Bearings. Mugen NMB bearings are a higher grade than regular bearings and provide increased performance and durability.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes