C0271 Mugen Seiki 3x13.8mm Joint Pin
€3.98
These are replacement 3x13.8mm joint pins for Mugen buggies and fits the MBX5 family of buggies.
SPARES
Peças para carros telecomandados e acessórios para carros Rc destinados a Hobby ou competição em diverças escalas de modelismo.
E2506 Mugen Seiki Rear Shock Boot (4)
€9.51
This is a pack of four replacement Mugen Rear Shock Boots, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy.
C0264 Mugen Seiki Universal Joint Shaft
€3.74
C0264 Mugen Seiki Universal Joint ShaftThis is a set of replacement joint shafts for the universals used in the Mugen MBX5 buggie
XRAY LIGHTWEIGHT DIFF OUTDRIVE ADAPTER - HUDY SPRING STEEL™ (2) - 335072
€17.48
XRAY LIGHTWEIGHT DIFF OUTDRIVE ADAPTER - HUDY SPRING STEEL™ (2) - 335072
E2721 Mugen Seiki MBX8 Clutch Springs 0.95mm (4-shoe)
€6.30
E2721 Mugen Seiki MBX8 Clutch Springs 0.95mm (4-shoe)
C0270 Mugen Seiki 3x12.8mm Joint Pin
€3.65
This is a set of replacement joint pins for the universals used in the Mugen MBX5 buggies, and are used to hold the universal joint together and go through the axle shafts and the joint shaft.
E0546 Mugen Seiki Damper Cap Bushing (4)
€5.04
This is a set of four replacement Mugen Damper Cap Bushings, and are intended for use with the Mugen MBX6 family of 1/8 Scale vehicles.
T2121 Mugen Seiki Front Upright
€5.98
This is a replacement Mugen Front Upright, and is intended for use with the Mugen MTX6 touring car.
E0135-B Mugen Seiki Suspension Arm Spacer Set
€6.54
This is a replacement Mugen Suspension Arm Spacer Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.
C0265 Mugen Seiki 2.5x15.8mm Universal Joint Pin
€2.65
This is a set of replacement joint pins for the universals used in the Mugen MBX5 buggies, and are used to hold the universal joint together and go through the axle shafts and the joint shaft.
H0471 Mugen Seiki Rear Body Mount Arm Pin (4)
€4.23
This is a pack of four replacement Mugen Rear Body Mount Arm Pins, and are intended for use with the Mugen MRX5 and MRX4X 1/8 scale on road cars.
E2108 Mugen Seiki Complete Bushing Set
€11.30
This is a replacement Mugen Complete Bushing Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. This complete set includes all of bushings used in the suspension mounts to adjust toe angle, kick-up and anti-squat on the vehicle.
E2505 Mugen Seiki Front Shock Boot (4)
€9.51
This is a pack of four replacement Mugen Front Shock Boots, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy.
Hong Nor-Front Arm Bushing-X3-45B
€2.36
Hong Nor-Front Arm Bushing-X3-45B
T2232 Mugen Seiki 1st Gear Spur V2 (54T)
€7.44
Mugen's MTX6 "V2" 1st Gear Spur Gear is available in multiple tooth count options to fine tune the gear ratio of your model.
T2238 Mugen Seiki 2nd Gear Spur V2 (47T)
€7.44
Mugen's MTX6 "V2" 2nd Gear Spur Gear is available in multiple tooth count options to fine tune the gear ratio of your model.
T2240 Mugen Seiki 2nd Gear Spur V2 (49T)
€7.44
Mugen's MTX6 "V2" 2nd Gear Spur Gear is available in multiple tooth count options to fine tune the gear ratio of your model.
T2230 Mugen gear 52 teeth 1st gear MTX-5 / MTX-6
€7.44
This is a pack of ten replacement T2230 Mugen gear 52 teeth 1st gear MTX-5 / MTX-6.
Hong Nor-4x67.6mm Arms Shaft-X3.6-07
€4.15
Hong Nor-4x67.6mm Arms Shaft-X3.6-07
E0517 Mugen Seiki Front Shock Shaft (2)
€9.51
This is a pack of two replacement front shock shafts for the Mugen MBX7 and MBX5T truggy.
E2718 Mugen Seiki ALUMI. CLUTCH SHOE (2)
€18.82
E2718 Mugen Seiki ALUMI. CLUTCH SHOE (2)
E2149 Mugen MBX8 Aluminum Front/Front Lower Arm Mount
€19.92
This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the front location.
E0174 Mugen Seiki Washer Set
€9.27
This is a set of replacement Mugen washers, and are intended for use with the Mugen MBX series 1/8 scale vehicles.
Hong Nor -Clutch Shoe (2nd)- HN-428J
€11.06
Hong Nor -Clutch Shoe (2nd)- HN-428J
E2138 Mugen Seiki 2.5mm Rear Anti-Roll Bar
€10.16
This is an optional Mugen 2.5mm Rear Anti-Roll Bar.
T0270 Mugen Seiki Side Belt (Rubber) (MTX4)
€10.37
This is a replacement rubber front drive belt from Mugen Seiki.
E0705 Mugen Seiki Flywheel Washer/Spacers (4)
€3.09
This is a set of four replacement Mugen Seiki Flywheel Washer/Spacers, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.
E0717A Mugen Seiki 0.95mm Clutch Spring Set (3)
€7.40
This is a set of optional Mugen 0.95mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on.
Hong Nor -56T 2nd Spur Gear- HN-429C
€6.18
Hong Nor -56T 2nd Spur Gear- HN-429C
E2310 Mugen Seiki Aluminum Servo Saver Arm
€18.13
This is an optional Mugen Aluminum Servo Saver Arm, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.
MUGEN REAR WING MOUNT (+15) - E2429
€11.14
MUGEN REAR WING MOUNT (+15) - E2429
E2805 Mugen Seiki Throttle Linkage Parts Set
€8.37
This is a replacement Mugen Throttle Linkage Parts Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.
E2702 Mugen Seiki Light Weight Clutch Bell (13T)
€18.29
This is a replacement Mugen 13 Tooth Light Weight Clutch Bell. This clutch bell features reduced material to reduce weight and improve air flow.
E2421 Mugen Seiki MBX8 Front Bumper
€7.40
This is a replacement Mugen MBX8 Front Bumper.
E2116 Mugen Seiki Rear Hub Carrier Hinge Pin (2)
€13.74
This is a pack of two replacement Mugen Rear Hub Carrier Hinge Pins, and are intended for use with the Mugen MBX 1/8 scale nitro buggy. These hinge pins secure the rear hub carrier to the rear arm.
E0545 Mugen Seiki Damper End Set
€8.13
This is a replacement Mugen Damper End Set, and is intended for use with the Mugen MBX family of 1/8 Scale vehicles. This set includes four shaft ends and four spring cups.
E2564 Mugen Seiki MBX8 Shock Retaining Pin (4)
€10.28
This is a pack of four optional Mugen Seiki Big Bore Blank Shock Pistons. Create your own custom piston hole sizes with these blank pistons.
E2516 Mugen Front Damper Spring 1.6 L70/9.25T: X8, X8T
€13.00
Mugen Seiki 70mm Front Shock Spring Set (Soft - 1.6/9.25T) (2).
T2231 Mugen Seiki 1st Gear Spur V2 (53T)
€7.44
Mugen's MTX6 "V2" 1st Gear Spur Gear is available in multiple tooth count options to fine tune the gear ratio of your model.
T0268 Mugen Seiki Front Belt (Rubber) (MTX4)
€9.35
This is a replacement rubber front drive belt from Mugen Seiki.
T0269 Mugen Seiki Rear Belt (Rubber) (MTX4)
€9.96
This is a replacement rubber front drive belt from Mugen Seiki.
C0702B Mugen Seiki Flywheel Taper Cone
€3.98
These are replacement 3x13.8mm joint pins for Mugen buggies and fits the MBX5 family of buggies.
T2239 Mugen Seiki 2nd Gear Spur V2 (48T)
€7.44
Mugen's MTX6 "V2" 2nd Gear Spur Gear is available in multiple tooth count options to fine tune the gear ratio of your model.
E2168 Mugen Seiki Carbon Front Upright Arm (-3mm) (2)
€18.29
The Mugen Carbon Front Upright Arms offer improved initial steering response, and makes the vehicle more stable through the middle and exit of the corner. They also help to reduce bump steer and make the vehicle more predictable in bumpy conditions.
E2237 Mugen Seiki HTD Differential Cup Outdrive (2)
€15.57
This is a pack of two replacement Mugen HTD Differential Cup Outdrives for use with the optional HTD (High Traction Diff) Differentials.
E2241 Mugen Seiki HTD Differential Gasket (10)
€9.51
This is a pack of ten replacement Mugen HTD Differential Gaskets for use with the optional HTD (High Traction Diff) Differentials.