Peças de reposição, acessórios e opcionais para carros telecomandados. (3)

E2260 Mugen Seiki MBX8 Center Joint Cup

12,90 €

This is an optional Mugen MBX8 Center Joint Cup.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2121 Mugen Seiki Front Upright

6,75 €

This is a replacement Mugen Front Upright, and is intended for use with the Mugen MRX5. This upright can be used on either the Right or Left side of the car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0175 Mugen Seiki 2.1mm Front Anti Sway Bar

11,30 €

Últimos artigos em stock

This is a Mugen 2.1mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2531 Mugen Seiki Rear Damper Shaft (2)

12,25 €

This is a pack of two replacement Mugen Rear Damper Shafts. These shafts have been updated to be 3.5mm thick.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2233 0.8M 1st Gear Pinion 19T MRX6X - Mugen Seiki Racing

16,25 €

H2233 0.8M 1st Gear Pinion 19T: MRX6X - Mugen Seiki Racing

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Mugen MBX8 REAR LOWER ARM MOUNT F -E2175

27,70 €

Mugen MBX8 REAR LOWER ARM MOUNT F -E2175

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2422 Mugen Seiki MBX8 1-Piece Wing Stay

14,75 €

This is the Mugen MBX8 1-Piece Wing Stay Set, including the wing stay, wing stay brace and four plastic wing buttons.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2402-B Mugen Front Bumper And Body Mounts : MTX6R/6/5

15,90 €

T2402-B Mugen Front Bumper And Body Mounts : MTX6R/6/5.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0183 Mugen Seiki Rebound Stop Adjusting Screw

7,60 €

Últimos artigos em stock

This is a set of five replacement Mugen Seki rebound stop adjustment screws (droop screws) and are intended for use with the Mugen MBX6T 1/8 Truck.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0243 Mugen Seiki Aluminum Joint Cup (2)

16,50 €

Últimos artigos em stock

This is a set of two optional Mugen aluminum front or rear axle shafts, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0515 Mugen 1.8mm Front Damper Springs (Yellow) (2)

14,40 €

This is a set of two optional Mugen Seiki 1.8mm Front Damper Springs, and are intended for use with the Mugen MRX5 and MRX4 line of 1/8 scale on road cars.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2815 Mugen Seiki Aluminum Throttle Servo Horn

28,69 €

This is an optional Mugen Seiki Aluminum Throttle Servo Horn. This servo horn is made from high quality A7075 aluminum and provides a more direct brake feel.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2219 Mugen Seiki Rear Universal Set

62,50 €

This is a replacement Mugen Rear Universal Set. These redesigned universal drive shafts are must be used with the MUGE2131 uprights and require a 8x16x5mm ball bearing. The length of the drive shaft is 89.5mm.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2105 Mugen Seiki Front Lower Arm Hinge Pin Set (2)

7,05 €

This is a replacement Mugen Front Lower Arm Hinge Pin Set, and is intended for use with the Mugen MRX5.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2156 Mugen 1mm MBX8 Graphite Rear Lower Arm Plate (2)

23,60 €

This is a pack of two optional Mugen 1mm MBX8 Graphite Rear Lower Arm Plates. These plates attach to the suspension arm to increase stiffness. Mounting hardware not included.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0319 Mugen Seiki Brake Pad (4)

41,20 €

Últimos artigos em stock

This is a set of four replacement Mugen Brake Pads, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2242 Mugen Seiki HTD S6 Silicon O-Ring (10)

6,65 €

This is a pack of ten replacement Mugen HTD S6 Silicon O-Rings for use with the HTD (High Traction Diff) Differentials

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2114 Mugen Seiki Anti-Roll Bar Stopper Set (2)

12,65 €

This is a replacement Mugen Anti-Roll Bar Stopper Set, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2237 0.8M 1st Gear Spur Gear 60T: MRX6X Mugen Seiki Racing

8,10 €

H2237 0.8M 1st Gear Spur Gear 60T: MRX6X Mugen Seiki Racing

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2816 Mugen Seiki MBX7T Fuel Tank

22,44 €

This is a replacement Mugen MBX7T Fuel Tank.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0526 Mugen Front Shock Springs 1.9 (White) (MRX/MTX) (2)

14,40 €

This is a set of two optional 1.9 white front shock springs from Mugen Seiki.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2158 Mugen Seiki MTC2 Brace Upper Deck

8,15 €

This is a replacement Mugen MTC2 Brace Upper Deck.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2127 Mugen Seiki Rear Lower Suspension Shaft Set (2)

6,70 €

This is a replacement Mugen Rear Lower Suspension Shaft Set, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2509 Mugen Front Shock Spring 1.5 L70/7.75T (1pr): X8, X8T

15,99 €

Últimos artigos em stock

Mugen Seiki 70mm Front Shock Spring Set (Hard - 1.5/7.75T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0170 Mugen Seiki 2.9mm Rear Anti-Roll Bar

11,50 €

Últimos artigos em stock

This is a Mugen 2.9mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2239 1st Speed Gear 62T 0.8Mod Mugen MRX-6X

8,10 €

H2239 1st Speed Gear 62T 0.8Mod Mugen MRX-6X

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0225 Mugen Seiki Joint Cup

13,70 €

Últimos artigos em stock

This is a Mugen joint cup, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2160 Mugen Seiki MTC2 Upper Deck Screw (2)

5,60 €

This is a replacement Mugen MTC2 Upperdeck Screw (2 pcs). (Used with A2159)

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2161 Mugen Front Lower Suspension Arm L/R: X8T, X8TE

21,50 €

This is a replacement Mugen Front Lower Suspension Arm Set for use with the MBX8T and MBX8TE truggies. This set includes direction left and right side arms, with plastic arm inserts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2515 Mugen Front Damper Spring 1.6 L70/9.5T: X8, X8T

15,99 €

Últimos artigos em stock

Mugen Seiki 70mm Front Shock Spring Set (X Soft - 1.6/9.5T) (2).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0601/1A Mugen Seiki 15x21x4mm Bearing (10)

57,15 €

Últimos artigos em stock

Mugen 15x21x4mm Bearing. Package includes ten rubber shielded bearings.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2802 Fuel Tank Mount: MRX5, MTX6/5, MTX7

12,60 €

Últimos artigos em stock

H2802 Fuel Tank Mount: MRX5, MTX6/5, MTX7 This is a replacement Mugen.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

B0430 MUGEN SEIKI SERVO HORN MOUNTS FOR B0429

5,95 €

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2706 Mugen Seiki Aluminum Clutch Shoes (4)

37,60 €

Últimos artigos em stock

This is a pack of four replacement Mugen Aluminum Clutch Shoes for use with the optional Mugen 4-Shoe Clutch System.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0754 Mugen Seiki Aluminum Clutch Shoes (3)

29,38 €

Últimos artigos em stock

This is a set of aluminum clutch shoes, and come stock in the Mugen MBX5 and MBX6 buggy kits. These aluminum shoes tend to hit harder than the black or white shoes with little slip

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0166 Mugen Seiki 2.5mm Front Anti-Roll Bar

11,30 €

Últimos artigos em stock

This is a Mugen 2.5mm Front Anti-Roll Bar, and is intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2301 Mugen Seiki Servo Saver Set

10,00 €

Últimos artigos em stock

This is a replacement Mugen Servo Saver Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2302 Mugen Seiki Radio Box

16,80 €

Últimos artigos em stock

This is a replacement Mugen Radio Box, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2150 Mugen MBX8 Aluminum Front/Rear Lower Arm Mount

24,50 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the rear location

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2504 Mugen Seiki Shock End Steel Ball (4)

9,80 €

Últimos artigos em stock

This is a pack of four replacement Mugen Shock End Steel Balls, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy. These balls are directional. Be careful about the direction during installation.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Mugen Seiki Front Damper Spring (Hard, 75mm, 9.0T) (2)

11,00 €

Últimos artigos em stock

This is a set of two hard front shock springs from Mugen and are intended for use with the Mugen MBX6. These springs are 75mm in length, and have 9 Turns.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0168 Mugen Seiki 2.7mm Rear Anti-Roll Bar

11,40 €

Últimos artigos em stock

This is a Mugen 2.7mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2303 Mugen Seiki Radio Tray Mount/Battery Holder Set

16,80 €

Últimos artigos em stock

This is a replacement Mugen Radio Tray Mount/Battery Holder Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2507 Mugen Front Shock Spring 1.5 L70/8.25T (1pr): X8, X8T

15,99 €

Últimos artigos em stock

This is an optional Mugen 70mm Front Shock Spring Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. These springs are 70mm in length and are made from 1.5mm wire. This 8.25T spring rate is slightly softer than the 8.0T front springs included with the MBX7.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0575 Mugen B.Bore Rear Damper Spring Set (Medium - 1.5/8.50T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0222 Mugen Seiki Front/Rear Driveshaft (2)

38,30 €

Últimos artigos em stock

This is a set of two Mugen front or rear driveshaft bones, and are intended for use with the Mugen MBX6 1/8 scale buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

A2514 Mugen Seiki Shock Ball Joints + Parts: MTC1

12,95 €

This is a replacement Mugen MTC1 Shock Ball Joint Set. A2514

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0576 Mugen Big Bore Rear Damper Spring Set (Hard - 1.5/8.25T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes