Top de Vendas

H2810 Mugen Seiki MBX8 Fuel Cap Silicone O-Ring (4)

5,40 €

Não há produtos suficientes em stock

This is a pack of four replacement Mugen MBX8 Fuel Cap Silicone O-Rings.

Detalhes

Ver detalhes

H0471 Mugen Seiki Rear Body Mount Arm Pin (4)

5,20 €

This is a pack of four replacement Mugen Rear Body Mount Arm Pins, and are intended for use with the Mugen MRX5 and MRX4X 1/8 scale on road cars.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2822 Mugen Seiki MBX8 Titanium Lower Screw Set B

39,90 €

Não há produtos suficientes em stock

This is the optional Mugen Titanium Lower Screw Set A for the MBX8T and MBX8TE 1/8 scale truggies. This set includes only screws used on the lower half of the vehicle. Mugen offers the "Upper" Screw Set separately (MUGE2821).

Detalhes

Ver detalhes

E2821 Mugen Seiki MBX8 Titanium Upper Screw Set A

102,82 €

Não há produtos suficientes em stock

This is the optional Mugen Titanium Upper Screw Set A for the MBX8T and MBX8TE 1/8 scale truggies. This set includes only screws used on the upper half of the vehicle. Mugen offers the "Lower" Screw Set separately (MUGE2822).

Detalhes

Ver detalhes

E2804 Mugen Seiki Camber Link Pivot Ball (4)

9,08 €

Não há produtos suficientes em stock

This is a pack of four Mugen Camber Link Pivot Balls, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy. These pivot balls are used in the steering assembly and rear camber links.

Detalhes

Ver detalhes

E2711 Mugen Seiki MBX8 Light Weight Clutch Bell (14T)

22,50 €

Últimos artigos em stock

This is an optional Mugen 14 Tooth MBX8 Light Weight Clutch Bell. This clutch bell features large cut-outs, reducing weight and improving heat dissipation.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2602-1 Mugen Seiki 8x16x5mm NMB Bearing (10)

50,90 €

Últimos artigos em stock

This is a pack of ten replacement Mugen 8x16x5mm NMB Bearings. Mugen NMB bearings are a higher grade than regular bearings and provide increased performance and durability.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2564 Mugen Seiki MBX8 Shock Retaining Pin (4)

12,65 €

This is a pack of four optional Mugen Seiki Big Bore Blank Shock Pistons. Create your own custom piston hole sizes with these blank pistons.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2536 Mugen Seiki Big Bore Blank Shock Piston (4)

22,30 €

Não há produtos suficientes em stock

This is a pack of four optional Mugen Seiki Big Bore Blank Shock Pistons. Create your own custom piston hole sizes with these blank pistons.

Detalhes

Ver detalhes

E2531 Mugen Seiki Rear Damper Shaft (2)

12,25 €

This is a pack of two replacement Mugen Rear Damper Shafts. These shafts have been updated to be 3.5mm thick.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2522 Mugen Seiki 16mm Damper Cap (2)

23,85 €

Não há produtos suficientes em stock

This is a pack of two replacement Mugen 16mm Damper Caps.

Detalhes

Ver detalhes

E2420 Mugen Seiki MBX7R Chassis Weight (40g)

21,75 €

This is an optional Mugen 40 Gram Chassis Weight. This weight mounts to the back of the front gearbox or in front of the rear gear box on the MBX7R and MBX7TR nitro vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2303 Mugen Seiki Radio Tray Mount/Battery Holder Set

16,80 €

Últimos artigos em stock

This is a replacement Mugen Radio Tray Mount/Battery Holder Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2236 Mugen Seiki HTD Spur Gear (48T)

44,17 €

Últimos artigos em stock

This is an optional Mugen 48 Tooth Spur Gear for use with the optional HTD (High Traction Diff) Center Differential (MUGE2245).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2234 Mugen Seiki HTD Spur Gear (44T)

44,17 €

Últimos artigos em stock

This is an optional Mugen 44 Tooth Spur Gear for use with the optional HTD (High Traction Diff) Center Differential (MUGE2245).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2137 Mugen Seiki 2.8mm Front Anti-Roll Bar

12,50 €

This is an optional Mugen 2.8mm Front Anti-Roll Bar. This bar is slightly thicker than the standard 2.7mm bar included with the MGT7 and MGT7E.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2123 Mugen Seiki Steel Kingpin Balls (2)

21,50 €

This is a pack of two optional Mugen Steel Kingpin Balls. These kingpin balls are heavier than the stock parts, and eliminate the need for arm weights.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2120 Mugen Seiki Rear Lower Arm Hinge Pin (2)

9,50 €

Não há produtos suficientes em stock

Mugen Seiki Machined "B" Rear Hub Carrier Bushing Set. These bushings are compatible with MBX7 vehicles that are equipped with the optional Aluminum Universal Driveshaft Rear Hub Carriers (MUGE2134).

Detalhes

Ver detalhes

E0704 Mugen Seiki Aluminum Clutch Shoes (3) (Lightweight)

33,25 €

Não há produtos suficientes em stock

This is an optional set of three Mugen Aluminum Clutch Shoes, and are intended for use with the Mugen MBX family of 1/8 scale vehicles.

Detalhes

Ver detalhes

E0602/1 Mugen Seiki 5x10x4mm Bearing (10)

36,80 €

Não há produtos suficientes em stock

This is a set of ten replacement Mugen 5x10x4mm Bearings, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Detalhes

Ver detalhes

E0319 Mugen Seiki Brake Pad (4)

41,20 €

Últimos artigos em stock

This is a set of four replacement Mugen Brake Pads, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0183 Mugen Seiki Rebound Stop Adjusting Screw

7,60 €

Últimos artigos em stock

This is a set of five replacement Mugen Seki rebound stop adjustment screws (droop screws) and are intended for use with the Mugen MBX6T 1/8 Truck.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0172 Mugen Seiki 3.2mm Rear Anti-Roll Bar

11,50 €

Últimos artigos em stock

This is a Mugen 3.2mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0169 Mugen Seiki 2.8mm Rear Anti-Roll Bar

11,40 €

Últimos artigos em stock

This is a Mugen 2.8mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0161 Mugen Seiki Front Track Width Adjustment Spacer (4)

6,40 €

This is a set of replacement Mugen front track width adjustment spacers, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0801H Mugen Seiki Steering Rack Bushings (2)

4,69 €

This is a set of replacement steering rack bushings for the Mugen MBX5 family of buggies. These are the bushings that go into the steering ackerman plate, and connect the ackerman plate to the steering uprights.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2718 Mugen Seiki Aluminum 2nd Pinion Gear (20T)

17,00 €

Últimos artigos em stock

This is a replacement Mugen Aluminum 2nd 20 Tooth Pinion Gear.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2311 Mugen Seiki Graphite Radio Tray Brace

11,70 €

This is a replacement Mugen Graphite Radio Tray Brace.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2240 Mugen Seiki 2nd Gear Spur V2 (49T)

9,15 €

Mugen's MTX6 "V2" 2nd Gear Spur Gear is available in multiple tooth count options to fine tune the gear ratio of your model.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2232 Mugen Seiki 1st Gear Spur V2 (54T)

9,15 €

Mugen's MTX6 "V2" 1st Gear Spur Gear is available in multiple tooth count options to fine tune the gear ratio of your model.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2226 Mugen Seiki Differential Gear Washer Set

9,45 €

Últimos artigos em stock

This is a replacement Mugen Differential Gear Washer Set, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2212 Mugen Seiki 2-Speed Clutch Shoe

7,85 €

Últimos artigos em stock

This is a replacement Mugen 2-Speed Clutch Shoe, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2206 Mugen Seiki Front/Rear Differential Cup Outdrive Set (2)

9,08 €

Últimos artigos em stock

This is a replacement Mugen Front/Rear Differential Cup Outdrive Set, and is intended for use with the Mugen MTX5 touring car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T2129 Mugen Seiki Graphite Rear Upright Disc Set (2)

34,20 €

Não há produtos suficientes em stock

This is an optional Mugen Graphite Rear Upright Disc Set, and is intended for use with the Mugen MTX5 touring car.

Detalhes

Ver detalhes

T2118 Mugen Front Lower Suspension Arm L/R: MTX6/5

10,80 €

Últimos artigos em stock

T2118 Mugen Front Lower Suspension Arm L/R: MTX6/5.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

T0215 Mugen Seiki Universal Joint Pin

3,98 €

Últimos artigos em stock

This is a pack of eight replacement universal joint pins for the Mugen MTX4 1/10th scale touring car. These pins are used to hold the universal joint cup to the drive shafts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

P0403 Mugen Seiki Large Decal Sheet (Chrome)

11,83 €

Não há produtos suficientes em stock

This is a Mugen Seiki Large Chrome Decal Sheet.

Detalhes

Ver detalhes

H2716 Mugen Seiki HD Pinion - 2nd Gear (19T)

16,35 €

Últimos artigos em stock

Mugen HD Pinion gears are an optional upgrade for your MGT7 and MRX6 vehicles developed to improve durability and wear resistance. This 2nd gear pinion is available with a 19, 20 or 21 tooth count. Choose the tooth count from the pull down menu above.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2604 Mugen Seiki 5x10mm Heavy Duty Thrust Bearing

16,80 €

This is a replacement Mugen 5x10mm Heavy Duty Thrust Bearing.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2304 Mugen Seiki Brake Return Spring Set

7,10 €

Últimos artigos em stock

This is a replacement Mugen Brake Return Spring Set, and is intended for use with the Mugen MRX5.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2222 Mugen Seiki MRX6 Rear Solid Axle

20,30 €

Últimos artigos em stock

This is an optional Mugen Rear Light Weight Aluminum Axle Shaft Set, and is intended for use with the Mugen MRX5.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2213 Mugen Seiki Inner Drive Joint (2)

14,60 €

Últimos artigos em stock

This is a replacement Mugen Inner Drive Joint, and is intended for use with the Mugen MRX5.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2157 Mugen Seiki MRX6 Eccentric Hub Set

10,80 €

Não há produtos suficientes em stock

Mugen MRX6 Eccentric Hub Set. Package includes plastic bearing eccentrics, and arm inserts.

Detalhes

Ver detalhes

H2153 Mugen Seiki MRX6 2.8mm Rear Anti-Roll Bar

9,50 €

Últimos artigos em stock

Mugen MRX6 2.8mm Rear Anti-Roll Bar. This is the optional 2.8 MRX6 rear roll bar, and is the lightest of the three available offerings (2.8, 2.9 [stock], 3.0 [MUGH2155]).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H2118D Mugen Seiki MRX6 Front Suspension Arm

19,95 €

Não há produtos suficientes em stock

The Mugen MRX6 Front Suspension Arm Set includes upper and lower suspension arms, as well as an upper arm mount, caster spacers and sway bar arm mounting pieces.

Detalhes

Ver detalhes

H0288 Mugen Seiki 1st Gear Housing

44,65 €

Últimos artigos em stock

This is a replacement Mugen First Gear Housing, and is intended for use with the Mugen MRX5 and MRX4X 1/8 scale on road cars.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0272 Mugen Seiki Front Driveshaft for Universal

37,35 €

Últimos artigos em stock

This is a pack of two replacement Mugen Front Universal Drive Shafts, and are intended for use with the Mugen MRX4X 1/8 scale on road car.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0181C-G Mugen Seiki 3x8x2mm Alu. Roll Center Spacer (8)

9,80 €

Últimos artigos em stock

This is a pack of eight replacement Mugen 3x8x2mm Aluminum Roll Center Spacers.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

H0144 Mugen Seiki King Pin Ball Cup

7,55 €

Últimos artigos em stock

This is a replacement king pin ball cup set from Mugen Seiki. These ball cups go between the pillow ball, and the upright adjusting nuts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

FP2121 FP 25T Aluminum Servo Horn for Futaba / Hitec

FP2121 25T Aluminum Servo Horn for Futaba / Hitec

9,81 €

Últimos artigos em stock

Flash Point Racing Aluminum 25T Servo Arm. This arm is compatible with Futaba, ProTek, Savox, and any other servo that uses a 25T spline output shaft.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Menu

Carrinho de compras

Início

Os mais vendidos

APOIO AO CLIENTE

LOJA HOBBY351 LISBOA