IGT8 PARTS SPUR 49T 1ST GEAR MOD 1 IGT800549
7,65 €
Com IVA
A2813 5mm Aluminum Ball (4pcs): MTC2
15,80 €
Com IVA
5mm Aluminum Ball (4pcs): MTC2
T2306-B Mugen Servo Saver Upper Mount/Front Body Mount: MTX6
14,90 €
Com IVA
This is a replacement Mugen Servo Saver Mount and Front Body Mount Set.
H0283 Mugen Seiki 50T 1st Gear
6,95 €
Com IVA
This is a replacement Mugen 50 Tooth First Gear, and is intended for use with the Mugen MRX4X 1/8 scale on road car.
IGT8 PARTS 3MM LOCK NUT (4PCS) IGT8HF032
1,90 €
Com IVA
T2225 Mugen Seiki 2x11.8mm Joint Pin Set (10)
7,40 €
Com IVA
This is a pack of ten replacement Mugen 2x11.8mm Joint Pins, and are intended for use with the Mugen MTX5 touring car.
H2714 Mugen Seiki HD Pinion - 1st Gear (15T)
15,30 €
Com IVA
Mugen HD Pinion gears are an optional upgrade for your MGT7 and MRX6 vehicles developed to improve durability and wear resistance. This 1st gear pinion is available with a 15 or 16 tooth count. Choose the tooth count from the pull down menu above.
E2173 Mugen Seiki Arm insert set MBX8
17,10 €
Com IVA
This is the Mugen MBX8 arm mount insert set
T2124-B Mugen Seiki Front Lower Arm Mount Bushing & Shim Set
11,20 €
Com IVA
This is a replacement Mugen Front Lower Arm Mount Bushing and Shim Set.
XRAY ALU ANTI-ROLL BAR COLLAR (2) - 303440
6,50 €
Com IVA
ALU ANTI-ROLL BAR COLLAR (2) - 303440
PS-34 BRIGHT RED TAMIYA POLYCARBONATE SPRAY 100ml 86034
8,50 €
Com IVA
CARTEN Shock spring (1.2X22mm)Blue-Hard
4,50 €
Com IVA
E2719 Mugen Seiki MBX8 Light Weight Clutch Bell (13T)
22,66 €
Com IVA
This is an optional Mugen 13 Tooth MBX8 Light Weight Clutch Bell. This clutch bell features large cut-outs, reducing weight and improving heat dissipation.
H0274 Mugen Seiki 2.5x11.8mm Roller Pin (10)
5,65 €
Com IVA
This is a pack of ten replacement Mugen 2.5x11.8mm Roller Pins, and are intended for use with the Mugen MRX4X 1/8 scale on road car.
E0161 Mugen Seiki Front Track Width Adjustment Spacer (4)
6,40 €
Com IVA
This is a set of replacement Mugen front track width adjustment spacers, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
XRAY COMPOSITE SUSPENSION ARM FRONT UPPER - V2 - 332130
8,00 €
Com IVA
COMPOSITE SUSPENSION ARM FRONT UPPER - V2 - 332130
Schumacher Wide "Stagger Rib" 2.2" 1/10 4WD Buggy Front Carpet Tires (2) (Yellow)
9,00 €
Com IVA
This is a pair of Schumacher Racing Wide "Stagger Rib" 2.2 1/10 4WD Buggy Front Tires.
PNEUS HOT DICE V2 BUGGY C4 (HARD) CON INSERT (2 PCS.) PCT2003-C4
13,50 €
Com IVA
C0751 Mugen Seiki 0.9mm Clutch Spring Set (3)
5,81 €
Com IVA
This is a set of stock 0.9mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.
VORTEX WHEELS YELLOW (4PCS) PCY0103
6,50 €
Com IVA
PS-23 GUM METAL GREY POLICARBONATE SPRAY 100ML TAMIYA
8,50 €
Com IVA
PS-23 Gun Metal Grey Policarbonate Spray 100ml Tamiya These spray paints were especially developed for decorating transparent polycarbonate bodies used in R/C car modeling.
H2240 2st Speed Gear 56T 0.8Mod Mugen MRX-6X
7,90 €
Com IVA
H2240 2st Speed Gear 56T 0.8Mod Mugen MRX-6X
E2420 Mugen Seiki MBX7R Chassis Weight (40g)
21,75 €
Com IVA
This is an optional Mugen 40 Gram Chassis Weight. This weight mounts to the back of the front gearbox or in front of the rear gear box on the MBX7R and MBX7TR nitro vehicles.
TAMIYA PARTS GEAR SET DIFFERENTIAL TT01/E/R G-PARTS 51004
7,95 €
Com IVA
PS-24 FLOURESCENT ORANGE POLICARBONATE SPRAY 100ML TAMIYA
9,50 €
Com IVA
PS-24 Fluorescente Orange Policarbonate Spray 100ml Tamiya These spray paints were especially developed for decorating transparent polycarbonate bodies used in R/C car modeling.
E2717 Mugen Seiki MBX8 Clutch Pins (4-shoe)
10,69 €
Com IVA
This is an Mugen MBX8 Carbon Clutch Shoes (4-shoe)
TAMIYA PARTS M-08 Concept Gears 51621
3,95 €
Com IVA
TAMIYA PARTS M-08 Concept Gears 51621
C0601/1 Mugen Seiki 8x16x5mm Bearing (10)
24,99 €
Com IVA
C0601/1 Mugen Seiki 8x16x5mm Bearing (10)
DRIVE SHAFT ADJUSTMENT WASHERS 8X10X0.1 (10PCS)
2,29 €
Com IVA
This is pack of 10 Ultimate Racing drive shaft shims. These are the small shims used to shim the space between the drive shaft and the wheel hub. Its dimensions 8,1x10x0,1 mm allows adjusting perfectly the wheel hub tolerance without affecting the proper bearing function because it just lean on the internal part of the bearing.
A2242 Mugen Seiki MTC2 Front Rear Drive Belt
6,35 €
Com IVA
This is a replacement Mugen MTC2 Front Rear Drive Belt.
Hong Nor -Clutch Gear (2nd) 22T- HN-429G
7,60 €
Com IVA
Hong Nor -Clutch Gear (2nd) 22T- HN-429G
XRAY FIXED PULLEY 16T (2) - 305576
8,00 €
Com IVA
XRAY FIXED PULLEY 16T (2) - 305576
E2132 Mugen Front Upper Suspension Arm Set
13,70 €
Com IVA
These front upper suspension arms have been shortened 1.6mm in length. This will allow the use of the MUGE0161 spacer between the pillar ball and the upper arm. This will allow for the same camber on each side of the buggy.
XRAY X4 COMPOSITE HUB - GRAPHITE - 302240-G
9,90 €
Com IVA
X4 COMPOSITE HUB - GRAPHITE - 302240-G
TAMIYA PARTS WHEELS TRUCK RACING FRONT/REAR BLACK 54741
11,50 €
Com IVA
TAMIYA PARTS WHEELS TRUCK RACING FRONT/REAR BLACK 54741
E2137 Mugen Seiki 2.8mm Front Anti-Roll Bar
12,50 €
Com IVA
This is an optional Mugen 2.8mm Front Anti-Roll Bar. This bar is slightly thicker than the standard 2.7mm bar included with the MGT7 and MGT7E.
J-TECH-1:8 ON ROAD REAR TIRES SH.35 GOLD-JTP01835G
13,25 €
Com IVA
J-TECH-1:8 ON ROAD REAR TIRES SH.35 GOLD-JTP01835G
J-TECH-1:8 ON ROAD FRONT TIRES SH.32 GOLD-JTA01832G
11,75 €
Com IVA
J-TECH-1:8 ON ROAD FRONT TIRES SH.32 GOLD-JTA01832G
E0517 Mugen Seiki Front Shock Shaft (2)
11,70 €
Com IVA
This is a pack of two replacement front shock shafts for the Mugen MBX7 and MBX5T truggy.
D0807 Mugen Seiki Body Pin (8)
4,90 €
Com IVA
This is a pack of eight replacement body clips from Mugen Seiki.
Tamiya Parts M-03/04/05/06 Reinforced Gear Set black 54277
6,80 €
Com IVA
Tamiya Parts M-03/04/05/06 Reinforced Gear Set black 54277
PS-61 METALIC ORANGE POLICARBONATE SPRAY 100ML TAMIYA 86061
9,50 €
Com IVA
PS-2 RED POLICARBONATE SPRAY 100ML TAMIYA
9,00 €
Com IVA
PS-02 Red Policarbonate Spray 100ml Tamiya These spray paints were especially developed for decorating transparent polycarbonate bodies used in R/C car modeling.
XRAY BALL JOINT 4.9MM - OPEN (4) - 303454
6,50 €
Com IVA
BALL JOINT 4.9MM - OPEN (4) - 303454
Ultra High Speed Motor Cooling Fan 40mm
11,61 €
Com IVA
WTF 40mm motor cooling fan features a 7 short blades with larger brushless motor coil. Which allow higher torque to push the blade to the very high speed range of 14,000-15,000 RPM @ 8.4V.
O.S. R5 Short Body Standard Glow Plug "Medium"
7,50 €
Com IVA
This is an O.S. R5 "Medium" Heat Range, Short Body Standard Glow Plug. O.S. glow plugs are designed for high nitro fuels (25% +), and increased durability at high RPM, as well as extreme temperatures.
BODY MOUNT EXTENSION SET 5,5MM(4) TAMIYA 54604
7,40 €
Com IVA
BODY MOUNT EXTENSION SET 5,5MM(4) TAMIYA 54604. Alto desempenho e máxima durabilidade e facíl montagem.