Filtros ativos

VENTILATED Z14 CLUTCH BELL WITH BEARINGS
VENTILATED Z14 CLUTCH BELL WITH BEARINGS
18,81 €
Com IVA
Não há produtos suficientes em stock
This is the vented 1/8th scale clutch bell from UR. This bell has been designed with three irregular holes to allow air to help cool the clutch bell and clutch shoes for longer life, as well as allow debris to leave the clutch bell for smoother operation.  It includes 2 bearings. This clutch bell works great with the UR Compak Clutch System. Available in 13, 14, 
Detalhes
Ver detalhes  
WLTOYS 1/10 OFF ROAD 2.4GHZ 4WD 550 MOTOR RTR
WLTOYS 1/10 OFF ROAD 2.4GHZ 4WD 550 MOTOR RTR
175,00 €
Com IVA
Não há produtos suficientes em stock
This is a 1/10 scale electric off-road RTR 4WD buggy ideal for beginners that want to get started in the RC world at a very affordable price. It comes already assembled and ready to run. With 4 wheel drive, a powerful 550 brushed motor, the four-wheel independent suspension with 4 hydraulic shock absorbers and the Li-Po battery provided giving awesome performance on any type of surface.
Detalhes
Ver detalhes  
BATERY ULTIMATE 6.6V. 2500MAH LIFE FLAT RECEIVER PACK JR UR4453
BATERY ULTIMATE 6.6V. 2500MAH LIFE FLAT RECEIVER PACK JR UR4453
29,90 €
Com IVA
Não há produtos suficientes em stock
BATERY ULTIMATE 6.6V. 2500MAH LIFE FLAT RECEIVER PACK JR UR4453. This is the new 6.6v. 2500mAh Ultimate Racing LiFe Flat Receiver Pack with JR plug. It is designed to power the electronics of 1/10th & 1/8th scale nitro race cars. With standard dimensions, the RX-Packs are suitable for most R/C models available on the market that require flat receiver battery packs like Mugen, Associated, etc. Capacity: 2500mAh Voltage: 6.6V (2S) Dimensions (mm): 90x30x17 Weight: 90g Connector: JR plug  
Detalhes
Ver detalhes  
CLEANING PASTE SYNTHETIC AND STICKY
ULTIMATE CLEANING GUM UR8602
10,90 €
Com IVA
Não há produtos suficientes em stock
Synthetic and sticky paste used to clean the dirt of oil and grease from the car. To clean you just have to press the paste on the piece you want to clean and the dirt stays stuck to the paste. To eliminate the pulp's suitability you just have to mix the pasta again and the dirt is absorbed and you're ready to use it again. 110gr
Detalhes
Ver detalhes  
MIP Mugen 16mm 6 Hole Bypass1 Piston Set (4)
Flash Point MIP 16mm 6 Hole Bypass1 Pistons Set (4)
49,55 €
Com IVA
Não há produtos suficientes em stock
The MIP Mugen 16mm 6 Hole Bypass1 Pistons are not like anything you have ever experienced before. MIP Bypass1 pistons are fully customizable and allow you to control your shocks rebound speed. MIP Bypass1 Pistons are also Dyno Tuned to ensure they match the compression characteristics of the stock pistons!
Detalhes
Ver detalhes  
O.S.SPEED MAX-R21 ENGINE ONLY (1B900)
O.S.SPEED MAX-R21 ENGINE ONLY (1B900)
275,00 €
Com IVA
Não há produtos suficientes em stock
Novo MAX-R21 VER.2 para 1/8 on-road. O MAX-R21 VER.2 foi desenvolvido para corridas on-road em 1/8 com excelente custo-benefício, podendo ser facilmente utilizado em corridas para usuários iniciantes e esportivos. O virabrequim e o carburador foram revisados em relação ao modelo anterior para maior facilidade de uso. O cabeçote externo é azul, cor da imagem da série Max, com novo design a laser. Inclui ・Plugue RP7 ・Anel de vedação do escapamento・Conjunto de tampa contra poeira 3mm/16mm/18mm ・Pinça do volante・Redutor 8,5 mm (roxo) Especificações Deslocamento 3,49 cc / 0,213 cu.in Diâmetro 16,08 mm/0,633 pol. Curso 17,2 mm / 0,6771n. Saída 2,75 cv / 2,71 cv / 32.000 rpm. Faixa prática de RPM 4.000 ~ 44.000 rpm. Peso do motor 350g / 12,35 onças.
Detalhes
Ver detalhes  
CTxWP Li-Po Battery 4200mAh/11.1V 25C for CTxWP Tire Warmer
CTxWP Li-Po Battery 4200mAh/11.1V 25C for CTxWP Tire Warmer
54,90 €
Com IVA
Não há produtos suficientes em stock
The Battery can be built into the Tire Warmers (Li-Po 3S), so they can be used without connecting to a power supply. Built-in Li-Po dedicated charging port allows charging without detaching the battery (including dedicated charging cable). The battery protection function has a low voltage alarm setting function!
Detalhes
Ver detalhes  
FP2137 MIP Hex Driver Wrench 2.5mm Ball End (9010)
FP2137 MIP Hex Driver Wrench 2.5mm Ball End (9010)
17,99 €
Com IVA
Não há produtos suficientes em stock
This is the MIP 2.5mm ball end hex wrench with harden machined tip. MIP hex wrenches are precision ground with Diamond wheels for accuracy and unmatched strength. This Hex Driver features the classic Thorp polycarbonate handle that stays cool and allows you to apply 100% of your available torque with less fatigue.
Detalhes
Ver detalhes