Peças Mugen MBX8-R Nitro 1/8 Off Road

E0710 Mugen Seiki Aluminum Clutch Shoes (3) (Hard)

37,60 €

E0710 Mugen Seiki Aluminum Clutch Shoes (3) (Hard)

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

C0601/1 Mugen Seiki 8x16x5mm Bearing (10)

24,99 €

C0601/1 Mugen Seiki 8x16x5mm Bearing (10)

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0162 Mugen Front Upper Suspension Arm Shaft (2)

6,35 €

Não há produtos suficientes em stock

This is a set of replacement Mugen front upper suspension arm shafts, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Detalhes

Ver detalhes

E0219 Mugen Seiki Self Locking Wheel Nut (4)

19,75 €

Não há produtos suficientes em stock

This is a set of four optional Mugen self locking wheel nuts and are intended for use with Mugen 1/8 scale off road vehicles.

Detalhes

Ver detalhes

E0228 Mugen Front/Rear Differential Cup Outdrive (2)

15,20 €

Últimos artigos em stock

For use with the MBX6 and MBX7 family of vehicles. These outdrives are for use in both the front and rear differentials.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0229 Mugen Center Differential Outdrive Cup

15,85 €

Não há produtos suficientes em stock

This is a set of replacement center differential cups for the Mugen MBX family of buggies.

Detalhes

Ver detalhes

E0240 Mugen 1mm Wide Offset Wheel Hubs

12,00 €

Últimos artigos em stock

This is a set of two Mugen 1mm wide offset wheel hubs and are intended for use with the Mugen MBX6 1/8 scale buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0257 Mugen Seiki S5 Silicon O-Ring Set (10)

7,35 €

Últimos artigos em stock

This is a replacement Mugen S5 Silicon O-Ring Set, and is intended for use with the Mugen MBX family of vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0545 Mugen Seiki Damper End Set

10,00 €

This is a replacement Mugen Damper End Set, and is intended for use with the Mugen MBX family of 1/8 Scale vehicles. This set includes four shaft ends and four spring cups.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0546 Mugen Seiki Damper Cap Bushing (4)

6,20 €

This is a set of four replacement Mugen Damper Cap Bushings, and are intended for use with the Mugen MBX6 family of 1/8 Scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0554 Mugen Rear Damper Spring (Soft, 86mm, 10.5T) (2)

15,55 €

Não há produtos suficientes em stock

This is a set of two rear shock springs from Mugen and are intended for use with the Mugen MBX. These springs are 86mm in length, and have 10.5 Turns.

Detalhes

Ver detalhes

E0555 Mugen Rear Damper Spring (Medium, 86mm, 10.25T) (2)

12,75 €

Não há produtos suficientes em stock

This is a set of two medium rear shock springs from Mugen and are intended for use with the Mugen MBX. These springs are 86mm in length, and have 10.25 Turns..

Detalhes

Ver detalhes

E0556 Mugen Rear Damper Spring (Hard, 86mm, 10.0T) (2)

15,55 €

Últimos artigos em stock

This is a set of two hard rear shock springs from Mugen and are intended for use with the Mugen MBX. These springs are 86mm in length, and have 10 Turns.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0562 Mugen Rear Damper Spring (XX Soft, 86mm, 11.0T) (2)

15,55 €

Últimos artigos em stock

This is a set of two extra extra soft rear shock springs from Mugen. These springs are 86mm in length, and have 11 Turns.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0563 Mugen Rear Damper Spring (X Soft, 86mm, 10.75T) (2)

15,55 €

Últimos artigos em stock

This is a set of two extra soft rear shock springs from Mugen. These springs are 86mm in length, and have 10.75 Turns.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0575 Mugen B.Bore Rear Damper Spring Set (Medium - 1.5/8.50T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0576 Mugen Big Bore Rear Damper Spring Set (Hard - 1.5/8.25T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0577 Mugen Big Bore Rear Damper Spring Set (X Hard - 1.5/8.00T) (2)

16,50 €

Não há produtos suficientes em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Detalhes

Ver detalhes

E0578 Mugen Big Bore Rear Damper Spring Set (XX Hard - 1.5/7.75T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0582 Mugen Big Bore Rear Damper Spring Set (Soft - 1.5/8.75T) (2)

16,50 €

Últimos artigos em stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0601/1A Mugen Seiki 15x21x4mm Bearing (10)

57,15 €

Últimos artigos em stock

Mugen 15x21x4mm Bearing. Package includes ten rubber shielded bearings.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0702 Mugen Seiki Nitro 3-Shoe Flywheel

17,95 €

Últimos artigos em stock

This is a replacement stock engine flywheel for the Mugen MBX family of buggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0803 Mugen Seiki Fuel Tank Bushing

3,40 €

Últimos artigos em stock

This is a set of replacement rubber fuel tank bushings for the Mugen MBX buggies and truggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0811-B Mugen Seiki Rear Upper Arm Link (Long)

5,90 €

This is a the new optional long rear upper arm link that comes with the Mugen MBX buggy kits.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0813 Mugen Seiki Rear Upper Arm Link

8,05 €

This is the replacement rear upper arm link assembly ends for the Mugen MBX.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E0814 Mugen Seiki Ball Link 7mm

5,15 €

Últimos artigos em stock

This is a set of replacement plastic ball ends for the Mugen MBX truggy. These are used for the steering linkage and connect the front hubs to the steering ackerman

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E1068 Mugen Seiki Wing (White)

17,40 €

Últimos artigos em stock

This is an optional Mugen Seiki Lightweight High Down Force Wing. This wing is IFMAR legal and designed to provide high downforce, without the high CG's.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E1069 Mugen Seiki Wing (Yellow)

18,05 €

Últimos artigos em stock

This is an optional Mugen Seiki Lightweight High Down Force Wing. This wing is IFMAR legal and designed to provide high downforce, without the high CG's.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E1070 Mugen Seiki Wing (Black)

17,40 €

Não há produtos suficientes em stock

This is an optional Mugen Seiki Lightweight High Down Force Wing. This wing is IFMAR legal and designed to provide high downforce, without the high CG's.

Detalhes

Ver detalhes

E2108 Mugen Seiki Complete Bushing Set

13,90 €

This is a replacement Mugen Complete Bushing Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. This complete set includes all of bushings used in the suspension mounts to adjust toe angle, kick-up and anti-squat on the vehicle.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2116 Mugen Seiki Rear Hub Carrier Hinge Pin (2)

16,90 €

This is a pack of two replacement Mugen Rear Hub Carrier Hinge Pins, and are intended for use with the Mugen MBX 1/8 scale nitro buggy. These hinge pins secure the rear hub carrier to the rear arm.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2119-A Machined Bushing "A" 4pcs (for E2134)

22,54 €

Últimos artigos em stock

Mugen Seiki Machined "A" Rear Hub Carrier Bushing Set. These bushings are compatible with MBX7 vehicles that are equipped with the optional Aluminum Universal Driveshaft Rear Hub Carriers (MUGE2134).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2131 Mugen Seiki Rear Hub Carrier Set

11,50 €

Não há produtos suficientes em stock

These rear hub carriers has been modified to allow for use of an 8mm x 16mm ball bearing which is required for the redesigned MUGE2219 universal shaft. This hub carrier will also allow the use of the 15mm x 21mm ball bearing too.

Detalhes

Ver detalhes

E2132 Mugen Front Upper Suspension Arm Set

13,70 €

These front upper suspension arms have been shortened 1.6mm in length. This will allow the use of the MUGE0161 spacer between the pillar ball and the upper arm. This will allow for the same camber on each side of the buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2139 Mugen Front Track Width Adj. Spacer (0.5mm) 4pcs

6,35 €

Últimos artigos em stock

This is a pack of four replacement Mugen 0.5mm Aluminum Front Track Width Spacers.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2142 Mugen Seiki MBX8 Gearbox

17,10 €

This is a replacement Mugen MBX8 Gear Box. This gearbox has been updated to allow you to remove and service the differential without detaching the suspension arm mounts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2143 Mugen Seiki MBX8 Center Differential Mount

19,60 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Center Differential Mount. .

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2144 Mugen MBX8 Front Lower Suspension Arm Set

19,60 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Front Lower Suspension Arm Set. This set also includes the plastic arm inserts, but no mounting hardware.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2145 Mugen MBX8 Rear Lower Suspension Arm Set

16,90 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Rear Lower Suspension Arm Set. This set also includes the plastic arm inserts, but no mounting hardware.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2146 Mugen Seiki Non-Trailing Front Hub Carrier Set

13,80 €

Últimos artigos em stock

This is an optional Mugen Seiki Non-Trailing Front Hub Carrier Set, for use with the MBX7 family of buggies, trucks, and GT. Package includes one left and right side, as well as four inserts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2147 Mugen 1.5mm Trailing Front Hub Carrier Set

13,80 €

This is an optional Mugen Seiki 1.5mm Trailing Front Hub Carrier Set that can be used with CVA (MUGE0221 & MUGE0224) and universal driveshaft on all the MBX family of buggies, trucks, and GT vehicles. Package includes one left and right side, as well as four inserts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2148 Tension Rod, Body Mount, Front Upper Plate: X8/E, X8T/E

20,40 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Body Mount and Front Upper Plate Set.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2149 Mugen MBX8 Aluminum Front/Front Lower Arm Mount

24,50 €

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the front location.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2150 Mugen MBX8 Aluminum Front/Rear Lower Arm Mount

24,50 €

Últimos artigos em stock

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the rear location

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2156 Mugen 1mm MBX8 Graphite Rear Lower Arm Plate (2)

23,60 €

This is a pack of two optional Mugen 1mm MBX8 Graphite Rear Lower Arm Plates. These plates attach to the suspension arm to increase stiffness. Mounting hardware not included.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2157 Mugen 1.2mm MBX8 Graphite Rear Lower Arm Plate (2)

24,50 €

Últimos artigos em stock

This is a pack of two optional Mugen 1.2mm MBX8 Graphite Rear Lower Arm Plates. These plates attach to the suspension arm to increase stiffness. Mounting hardware not included.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2158 Mugen MBX8 Graphite Front Upper Steering Plate

27,60 €

Últimos artigos em stock

This is an optional Mugen MBX8 Graphite Front Upper Steering Plate, with two included Servo Saver Spacers and hardware.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2160 Mugen Center Diff Mount & Chassis Braces: X8E

18,66 €

Últimos artigos em stock

This is a replacement Mugen MBX8 ECO Center Differential Mount and Chassis Brace Set.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2161 Mugen Front Lower Suspension Arm L/R: X8T, X8TE

21,50 €

This is a replacement Mugen Front Lower Suspension Arm Set for use with the MBX8T and MBX8TE truggies. This set includes direction left and right side arms, with plastic arm inserts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

E2168 Mugen Seiki Carbon Front Upright Arm (-3mm) (2)

22,50 €

The Mugen Carbon Front Upright Arms offer improved initial steering response, and makes the vehicle more stable through the middle and exit of the corner. They also help to reduce bump steer and make the vehicle more predictable in bumpy conditions.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes

Menu

Carrinho de compras

Início

MBX8-R

APOIO AO CLIENTE

LOJA HOBBY351 LISBOA