MBX8-R

E2134 Mugen Aluminum Rear Hub Carrier Set (for Universals)

127,40 €

Com IVA

Não há produtos suficientes em stock

This is a pack of two optional Mugen Seiki Aluminum Rear Hub Carriers. These aluminum carriers are designed for use with the updated Universal Driveshafts (MUGE2219) found on the MBX7R and use the 8x16mm bearing (MUGC0601). 

Detalhes

Ver detalhes  

E2821 Mugen Seiki MBX8 Titanium Upper Screw Set A

102,82 €

Com IVA

Não há produtos suficientes em stock

This is the optional Mugen Titanium Upper Screw Set A for the MBX8T and MBX8TE 1/8 scale truggies. This set includes only screws used on the upper half of the vehicle. Mugen offers the "Lower" Screw Set separately (MUGE2822).

Detalhes

Ver detalhes  

E2425 Mugen Seiki MBX8 Aluminum Chassis (Updated)

99,65 €

Com IVA

Não há produtos suficientes em stock

This is the revised Mugen Aluminum Chassis for use with the MBX8 1/8 Nitro Buggy.

Detalhes

Ver detalhes  

E2723 Mugen Seiki MBX8 Clutch set (4-shoe)

91,65 €

Com IVA

Últimos artigos em stock

This is an Mugen MBX8 Clutch set (4-shoe)

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2529 Mugen Seiki 16mm Rear Damper Set

88,50 €

Com IVA

Últimos artigos em stock

This is a replacement Mugen 16mm Rear Damper Set. This set includes the necessary parts to assemble two complete rear shocks, minus springs. These shocks have been updated to have 3.5mm shock shafts, updated bladders and slim rubber boots. 

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2256 Mugen H.T. Front/Rear Differential Set 42T: X8

85,16 €

Com IVA

Não há produtos suficientes em stock

This is an optional Mugen MBX8 HTD Front/Rear Differential Set, featuring a 42T Conical Gear. This is smaller than the standard 44 Tooth equipped as standard equipment on the MBX8. 

Detalhes

Ver detalhes  

E2528 Mugen Seiki 16mm Front Damper Set

84,80 €

Com IVA

Não há produtos suficientes em stock

This is a replacement Mugen 16mm Front Damper Set. This set includes the necessary parts to assemble two complete front shocks, minus springs. These shocks have been updated to have 3.5mm shock shafts, updated bladders and slim rubber boots. 

Detalhes

Ver detalhes  

E2257 Mugen Seiki MBX8 HTD Front/Rear Differential Set (44T)

77,42 €

Com IVA

Não há produtos suficientes em stock

This is a replacement Mugen MBX8 HTD Front/Rear Differential Set. This is the standard diff equipped in the front and rear gearboxes of the MBX8. 

Detalhes

Ver detalhes  

E2245 Mugen Seiki MBX8 HTD Center Differential Set (46T)

75,48 €

Com IVA

Não há produtos suficientes em stock

This is a replacement Mugen 47 Tooth MBX8 HTD Center Differential Set, including the necessary parts to assemble once center differential, minus bearings and diff fluid. 

Detalhes

Ver detalhes  

E2566-B Mugen Seiki 4mm MBX8/E Graphite Rear Shock Tower

68,70 €

Com IVA

Não há produtos suficientes em stock

This is a Mugen Seiki 4mm MBX8 Graphite Rear Shock Tower is intended for use with Mugen MBX8 1/8 Off-Road Competition Nitro Buggy Kit and the MBX8 ECO 1/8 Electric Off-Road Buggy Kit as an optional graphite shock tower.

Detalhes

Ver detalhes  

E0220 Mugen Seiki Front/Rear Universal Set

63,75 €

Com IVA

Últimos artigos em stock

This is a set of two Mugen front or rear universal driveshafts, and are intended for use with the Mugen MBX6, MBX7 and MBX8 1/8 scale buggies.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2219 Mugen Seiki Rear Universal Set

62,50 €

Com IVA

This is a replacement Mugen Rear Universal Set. These redesigned universal drive shafts are must be used with the MUGE2131 uprights and require a 8x16x5mm ball bearing. The length of the drive shaft is 89.5mm.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2218 Mugen Seiki Front Universal Set

62,50 €

Com IVA

Últimos artigos em stock

This is a replacement Mugen Front Universal Set. These redesigned universal drive shafts are for use with the MUGE2129 front uprights and require a 8x16x5mm ball bearing.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2713 Mugen Seiki MBX8 One Piece Engine Mount

60,05 €

Com IVA

Últimos artigos em stock

This is an optional Mugen MBX8 One Piece Engine Mount.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2267 Mugen Seiki Spur Gear 45T (HTD)

59,50 €

Com IVA

Últimos artigos em stock

E2267 Mugen Seiki Spur Gear 45T (HTD).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2709 Mugen Seiki 4-Shoe Clutch System

57,60 €

Com IVA

Não há produtos suficientes em stock

This is the Mugen Seiki 4-Shoe Clutch System. This clutch system utilizes a fourth clutch shoe over the previous 3-shoe system all 1/8 off-road vehicles used. 

Detalhes

Ver detalhes  

E0601/1A Mugen Seiki 15x21x4mm Bearing (10)

57,15 €

Com IVA

Últimos artigos em stock

Mugen 15x21x4mm Bearing. Package includes ten rubber shielded bearings. 

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E0117 Mugen Seiki Titanium Rear Camber Rod (2)

55,25 €

Com IVA

Últimos artigos em stock

This is a set of optional titanium rear camber rods for the Mugen MBX5 buggies. These are lighter and stronger than the stock parts.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

FR800MU FasTrace side plates in carbon / kevlar side guard for Mugen MBX8 MBX7R

55,00 €

Com IVA

Não há produtos suficientes em stock

FR800MU FasTrace side plates in carbon / kevlar side guard for Mugen MBX8 MBX7R.

Detalhes

Ver detalhes  

E2565 Mugen Seiki 4mm MBX8 Graphite Front Shock Tower

52,90 €

Com IVA

Últimos artigos em stock

This is an optional Mugen 4mm Thick Graphite Front Shock Tower for the MBX8. 

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2246 MUGEN SEIKI CONICAL GEAR 42T (HT DIFF)

51,60 €

Com IVA

Não há produtos suficientes em stock

Detalhes

Ver detalhes  

E2602-1 Mugen Seiki 8x16x5mm NMB Bearing (10)

50,90 €

Com IVA

Últimos artigos em stock

This is a pack of ten replacement Mugen 8x16x5mm NMB Bearings. Mugen NMB bearings are a higher grade than regular bearings and provide increased performance and durability.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

Flash Point MIP 16mm 6 Hole Bypass1 Pistons Set (4)

49,55 €

Com IVA

Não há produtos suficientes em stock

The MIP Mugen 16mm 6 Hole Bypass1 Pistons are not like anything you have ever experienced before. MIP Bypass1 pistons are fully customizable and allow you to control your shocks rebound speed. MIP Bypass1 Pistons are also Dyno Tuned to ensure they match the compression characteristics of the stock pistons!

Detalhes

Ver detalhes  

Flash Point MIP 16mm 8 Hole Bypass1 Pistons Set (4)

49,55 €

Com IVA

Não há produtos suficientes em stock

This is a pack of four optional Flash Point 16mm MIP 8-Hole Bypass1 Pistons. These pistons are for use with 16mm big bore MBX series shocks. 

Detalhes

Ver detalhes  

E2255 Mugen Seiki MBX8 Front/Rear HTD Conical Gear (44T)

49,37 €

Com IVA

Últimos artigos em stock

This is a replacement Mugen 44 Tooth MBX8 HTD Conical Gear. This gear is used in the front and rear differentials of the MBX8 as standard equipment.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2254 Mugen Seiki MBX8 HTD Conical Gear (42T)

48,96 €

Com IVA

Últimos artigos em stock

E2254 Mugen Seiki MBX8 HTD Conical Gear (42T).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2601-1 Mugen Seiki 5x10x4mm NMB Bearing (10)

47,45 €

Com IVA

Últimos artigos em stock

This is a pack of ten optional Mugen 5x10x4mm NMB Bearings. These bearings are intended to be used as clutch bell bearings and are a higher grade than the stock bearings, increasing performance and durability for both on and off-road conditions.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2250 Mugen Seiki MBX8 HTD Spur Gear (47T)

47,33 €

Com IVA

Últimos artigos em stock

This is an optional Mugen Seiki 47 Tooth HTD Spur Gear. This spur gear is for use with the optional Mugen HTD (High Traction Differential - MUGE2245) Gear Set.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2548 REAR DAMPER CASE MBX7TR/E (2)

45,85 €

Com IVA

Não há produtos suficientes em stock

Detalhes

Ver detalhes  

E2152 Mugen Seiki MBX8 Aluminum Rear/Rear Lower Arm Mount

45,50 €

Com IVA

Últimos artigos em stock

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the rear gearbox, in the rear location.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2235 Mugen Seiki HTD Spur Gear (46T)

44,17 €

Com IVA

Últimos artigos em stock

This is a replacement Mugen 46 Tooth Spur Gear for use with the optional HTD (High Traction Diff) Center Differential,

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2234 Mugen Seiki HTD Spur Gear (44T)

44,17 €

Com IVA

Últimos artigos em stock

This is an optional Mugen 44 Tooth Spur Gear for use with the optional HTD (High Traction Diff) Center Differential (MUGE2245).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2236 Mugen Seiki HTD Spur Gear (48T)

44,17 €

Com IVA

Últimos artigos em stock

This is an optional Mugen 48 Tooth Spur Gear for use with the optional HTD (High Traction Diff) Center Differential (MUGE2245).

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2526 Mugen Seiki 16mm Front Damper Case (2)

41,50 €

Com IVA

Não há produtos suficientes em stock

This is a pack of two replacement Mugen 16mm Front Damper Cases. 

Detalhes

Ver detalhes  

E0319 Mugen Seiki Brake Pad (4)

41,20 €

Com IVA

Últimos artigos em stock

This is a set of four replacement Mugen Brake Pads, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2527 Mugen Seiki 16mm Rear Damper Case (2)

41,20 €

Com IVA

Não há produtos suficientes em stock

This is a pack of two replacement Mugen 16mm Rear Damper Cases. 

Detalhes

Ver detalhes  

E1071 Mugen 0.8mm MBX8 1/8 Nitro Buggy Body (Clear)

40,40 €

Com IVA

Últimos artigos em stock

This is a replacement Mugen MBX8 1/8 Nitro Buggy Body, in Clear 0.8mm thick Lexan. This body is trimmed but will require exhaust and cooling head cut-outs. Polycarbonate paint is also required.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2822 Mugen Seiki MBX8 Titanium Lower Screw Set B

39,90 €

Com IVA

Não há produtos suficientes em stock

This is the optional Mugen Titanium Lower Screw Set A for the MBX8T and MBX8TE 1/8 scale truggies. This set includes only screws used on the lower half of the vehicle. Mugen offers the "Upper" Screw Set separately (MUGE2821).

Detalhes

Ver detalhes  

E0222 Mugen Seiki Front/Rear Driveshaft (2)

38,30 €

Com IVA

Últimos artigos em stock

This is a set of two Mugen front or rear driveshaft bones, and are intended for use with the Mugen MBX6 1/8 scale buggy.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E0710 Mugen Seiki Aluminum Clutch Shoes (3) (Hard)

37,60 €

Com IVA

E0710 Mugen Seiki Aluminum Clutch Shoes (3) (Hard)

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2706 Mugen Seiki Aluminum Clutch Shoes (4)

37,60 €

Com IVA

Últimos artigos em stock

This is a pack of four replacement Mugen Aluminum Clutch Shoes for use with the optional Mugen 4-Shoe Clutch System.

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

FR850MU FasTrace "Flap Wing" aileron arms ant. sup.in carbon Mugen MBX8

36,90 €

Com IVA

Últimos artigos em stock

FR850MU FasTrace "Flap Wing" aileron arms ant. sup.in carbon Mugen MBX8

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E0602/1 Mugen Seiki 5x10x4mm Bearing (10)

36,80 €

Com IVA

Não há produtos suficientes em stock

This is a set of ten replacement Mugen 5x10x4mm Bearings, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Detalhes

Ver detalhes  

FP 2148 Lunsford Titanium Buggy Turnbuckle Set (5pcs)

33,64 €

Com IVA

Não há produtos suficientes em stock

The Flash Point Titanium Turnbuckle kit for the MBX8 and MBX8Eco is made in U.S.A. by Lunsford Racing

Detalhes

Ver detalhes  

E0704 Mugen Seiki Aluminum Clutch Shoes (3) (Lightweight)

33,25 €

Com IVA

Não há produtos suficientes em stock

This is an optional set of three Mugen Aluminum Clutch Shoes, and are intended for use with the Mugen MBX family of 1/8 scale vehicles. 

Detalhes

Ver detalhes  

E2309 Mugen Seiki Brake Disc (2)

32,15 €

Com IVA

Não há produtos suficientes em stock

This is a pack of two replacement Mugen Brake Discs, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy. 

Detalhes

Ver detalhes  

Mugen MBX8 REAR LOWER ARM MOUNT R -E2176

32,10 €

Com IVA

Últimos artigos em stock

Mugen MBX8 REAR LOWER ARM MOUNT R -E2176

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

MUGEN E2181REAR LOWER ARM PLATE 1.2mm (CFRP)

32,10 €

Com IVA

Últimos artigos em stock

MUGEN E2181REAR LOWER ARM PLATE 1.2mm (CFRP)

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2170 Mugen MBX8 Aluminum Rear/Front Lower Arm Mount (+4)

30,50 €

Com IVA

Últimos artigos em stock

This is an optional Mugen Seiki +4 Aluminum Rear/Front Lower Arm Mount, intended for use with the MBX8 line of vehicles. 

Comprar Detalhes

Adicionar ao carrinho Ver detalhes  

E2169 Alum Rear Arm Mount F (+2): X8/E, X8T/E

30,50 €

Com IVA

Últimos artigos em stock

The optional lower arm mount reduce the rear toe-in and lengthen the wheelbase of the vehicle.  The benefits to reducing the rear toe-in compared to the standard rear lower arm mount is an increase in mid corner rotation and improved handling in bumpy conditions

Comprar Detalhes

Adicionar ao carrinho Ver detalhes