CARTEN Ball End (4.8mm)
5,50 €
Com IVA
H2233 0.8M 1st Gear Pinion 19T MRX6X - Mugen Seiki Racing
16,25 €
Com IVA
H2233 0.8M 1st Gear Pinion 19T: MRX6X - Mugen Seiki Racing
Hong Nor-Clutch Spring For Adjustable Clutch System (Hard)-X3GT-61H
5,90 €
Com IVA
Hong Nor-Clutch Spring For Adjustable Clutch System (Hard)-X3GT-61H
Hong Nor -8x12x3.5 Ball Bearing (2 pcs)- HN-428I
6,20 €
Com IVA
Hong Nor -8x12x3.5 Ball Bearing (2 pcs)- HN-428I
H0855 Mugen Seiki Plastic Ball End
7,70 €
Com IVA
This is a pack of ten replacement plastic ball ends for Mugen buggies and trucks, and fits the Mugen MBX5 buggies as well as the MBX5T trucks.
E2172 Mugen MBX8 Rear Hubs Set
12,45 €
Com IVA
This is a replacement Mugen MBX8 Rear Hubs. No mounting hardware.
Hong Nor -8x10x1.5mm AL bush- HN-428F
2,00 €
Com IVA
Hong Nor -8x10x1.5mm AL bush- HN-428F
T2119-B Mugen B Rear Lower Suspension Arm L/R (Hard): MTX6R
10,80 €
Com IVA
T2119- Mugen B Rear Lower Suspension Arm L/R (Hard): MTX6R.
E0238 Mugen Seiki 2.5x14.8mm Universal Joint Pin (4)
6,55 €
Com IVA
This is a set of four replacement Mugen 2.5x14.8mm Universal Joint Pins, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
E2156 Mugen 1mm MBX8 Graphite Rear Lower Arm Plate (2)
23,60 €
Com IVA
This is a pack of two optional Mugen 1mm MBX8 Graphite Rear Lower Arm Plates. These plates attach to the suspension arm to increase stiffness. Mounting hardware not included.
H2121 Mugen Seiki Front Upright
6,75 €
Com IVA
This is a replacement Mugen Front Upright, and is intended for use with the Mugen MRX5. This upright can be used on either the Right or Left side of the car.
E0175 Mugen Seiki 2.1mm Front Anti Sway Bar
11,30 €
Com IVA
Últimos artigos em stock
This is a Mugen 2.1mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
Mugen MBX8 REAR LOWER ARM MOUNT F -E2175
27,70 €
Com IVA
Mugen MBX8 REAR LOWER ARM MOUNT F -E2175
E2531 Mugen Seiki Rear Damper Shaft (2)
12,25 €
Com IVA
This is a pack of two replacement Mugen Rear Damper Shafts. These shafts have been updated to be 3.5mm thick.
E2242 Mugen Seiki HTD S6 Silicon O-Ring (10)
6,65 €
Com IVA
This is a pack of ten replacement Mugen HTD S6 Silicon O-Rings for use with the HTD (High Traction Diff) Differentials
A2158 Mugen Seiki MTC2 Brace Upper Deck
8,15 €
Com IVA
This is a replacement Mugen MTC2 Brace Upper Deck.
Hong Nor-Adjustable Clutch-bell Alum. Nickel Coated GT-X3GT-60I
26,90 €
Com IVA
Hong Nor-Adjustable Clutch-bell Alum. Nickel Coated GT-X3GT-60I
E2816 Mugen Seiki MBX7T Fuel Tank
22,44 €
Com IVA
This is a replacement Mugen MBX7T Fuel Tank.
TAMIYA PARTS WHEELS TRUCK RACING FRONT/REAR BLACK 54741
11,50 €
Com IVA
TAMIYA PARTS WHEELS TRUCK RACING FRONT/REAR BLACK 54741
H2237 0.8M 1st Gear Spur Gear 60T: MRX6X Mugen Seiki Racing
8,10 €
Com IVA
H2237 0.8M 1st Gear Spur Gear 60T: MRX6X Mugen Seiki Racing
Hong Nor -2nd Spring- HN-428L
7,40 €
Com IVA
Hong Nor -2nd Spring- HN-428L
Hong Nor-Front C Hub- HN-X1-36
4,70 €
Com IVA
Hong Nor-Front C Hub- HN-X1-36
T2402-B Mugen Front Bumper And Body Mounts : MTX6R/6/5
15,90 €
Com IVA
T2402-B Mugen Front Bumper And Body Mounts : MTX6R/6/5.
E0183 Mugen Seiki Rebound Stop Adjusting Screw
7,60 €
Com IVA
Últimos artigos em stock
This is a set of five replacement Mugen Seki rebound stop adjustment screws (droop screws) and are intended for use with the Mugen MBX6T 1/8 Truck.
IGT8 PARTS DIFFERENTIAL CASE IGT8HF001
9,10 €
Com IVA
E2509 Mugen Front Shock Spring 1.5 L70/7.75T (1pr): X8, X8T
15,99 €
Com IVA
Últimos artigos em stock
Mugen Seiki 70mm Front Shock Spring Set (Hard - 1.5/7.75T) (2).
E0243 Mugen Seiki Aluminum Joint Cup (2)
16,50 €
Com IVA
Últimos artigos em stock
This is a set of two optional Mugen aluminum front or rear axle shafts, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
CARTEN Spur Gear 72T
4,50 €
Com IVA
E2219 Mugen Seiki Rear Universal Set
62,50 €
Com IVA
This is a replacement Mugen Rear Universal Set. These redesigned universal drive shafts are must be used with the MUGE2131 uprights and require a 8x16x5mm ball bearing. The length of the drive shaft is 89.5mm.
A2160 Mugen Seiki MTC2 Upper Deck Screw (2)
5,60 €
Com IVA
This is a replacement Mugen MTC2 Upperdeck Screw (2 pcs). (Used with A2159)
H0515 Mugen 1.8mm Front Damper Springs (Yellow) (2)
14,40 €
Com IVA
This is a set of two optional Mugen Seiki 1.8mm Front Damper Springs, and are intended for use with the Mugen MRX5 and MRX4 line of 1/8 scale on road cars.
E2815 Mugen Seiki Aluminum Throttle Servo Horn
28,69 €
Com IVA
This is an optional Mugen Seiki Aluminum Throttle Servo Horn. This servo horn is made from high quality A7075 aluminum and provides a more direct brake feel.
H2105 Mugen Seiki Front Lower Arm Hinge Pin Set (2)
7,05 €
Com IVA
This is a replacement Mugen Front Lower Arm Hinge Pin Set, and is intended for use with the Mugen MRX5.
H2239 1st Speed Gear 62T 0.8Mod Mugen MRX-6X
8,10 €
Com IVA
H2239 1st Speed Gear 62T 0.8Mod Mugen MRX-6X
IGT8 PARTS TRANSMISSION TOP MOUNT (2pcs) IGTE00F02
28,94 €
Com IVA
Carbon Fiber Transmission Top Mount for IGT8 Fits all models (2 pcs)
E2161 Mugen Front Lower Suspension Arm L/R: X8T, X8TE
21,50 €
Com IVA
This is a replacement Mugen Front Lower Suspension Arm Set for use with the MBX8T and MBX8TE truggies. This set includes direction left and right side arms, with plastic arm inserts.
IGT8 PARTS CARBON FIBER FRONT BODY POST SUPPORT IGT800F21
18,75 €
Com IVA
Hong Nor-Front Lower Arms L&R (Hard)- HN-X3-45H
13,90 €
Com IVA
Hong Nor-Front Lower Arms L&R (Hard)- HN-X3-45H
E2515 Mugen Front Damper Spring 1.6 L70/9.5T: X8, X8T
15,99 €
Com IVA
Últimos artigos em stock
Mugen Seiki 70mm Front Shock Spring Set (X Soft - 1.6/9.5T) (2).
E0319 Mugen Seiki Brake Pad (4)
41,20 €
Com IVA
Últimos artigos em stock
This is a set of four replacement Mugen Brake Pads, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.
XRAY COMPOSITE 2-SPEED GEAR 46T (2nd) - H - 345546
14,50 €
Com IVA
COMPOSITE 2-SPEED GEAR 46T (2nd) - H - 345546
Hong Nor-FUEL TANK-JS-38B
6,70 €
Com IVA
Hong Nor-FUEL TANK-JS-38B
T2114 Mugen Seiki Anti-Roll Bar Stopper Set (2)
12,65 €
Com IVA
This is a replacement Mugen Anti-Roll Bar Stopper Set, and is intended for use with the Mugen MTX5 touring car.
Hong Nor-Diff. Case (F&R)-X3-43
5,10 €
Com IVA
Hong Nor-Diff. Case (F&R)-HN-X3-43
H0526 Mugen Front Shock Springs 1.9 (White) (MRX/MTX) (2)
14,40 €
Com IVA
This is a set of two optional 1.9 white front shock springs from Mugen Seiki.
Hong Nor-CNC Aluminum Pinion Gear Mount-X3S-22
8,65 €
Com IVA
Hong Nor-CNC Aluminum Pinion Gear Mount-X3S-22
A2107 Mugen Seiki MTC1 Lower Arm Bushing Set
8,45 €
Com IVA
This is a replacement Mugen MTC1 Lower Arm Bushing Set, including five pairs of bushings.
CARTEN Bumper For Sedan Body
4,75 €
Com IVA
Hong Nor-Front Lower Arms L,R-X3-45
9,90 €
Com IVA
Hong Nor-Front Lower Arms L,R-X3-45
E2320 Mugen Seiki MBX8 Clamping Servo Saver Spring Adjuster
13,75 €
Com IVA
Últimos artigos em stock
This is a replacement Mugen MBX8 Clamping Servo Saver Spring Adjuster.