C0271 Mugen Seiki 3x13.8mm Joint Pin
€3.98
These are replacement 3x13.8mm joint pins for Mugen buggies and fits the MBX5 family of buggies.
MGT7
Spares for Mugen MGT7 Nitro 1/8 On Road.
C0264 Mugen Seiki Universal Joint Shaft
€3.74
C0264 Mugen Seiki Universal Joint ShaftThis is a set of replacement joint shafts for the universals used in the Mugen MBX5 buggie
C0270 Mugen Seiki 3x12.8mm Joint Pin
€3.65
This is a set of replacement joint pins for the universals used in the Mugen MBX5 buggies, and are used to hold the universal joint together and go through the axle shafts and the joint shaft.
C0265 Mugen Seiki 2.5x15.8mm Universal Joint Pin
€2.65
This is a set of replacement joint pins for the universals used in the Mugen MBX5 buggies, and are used to hold the universal joint together and go through the axle shafts and the joint shaft.
H2714 Mugen Seiki HD Pinion - 1st Gear (15T)
€12.44
Mugen HD Pinion gears are an optional upgrade for your MGT7 and MRX6 vehicles developed to improve durability and wear resistance. This 1st gear pinion is available with a 15 or 16 tooth count. Choose the tooth count from the pull down menu above.
H0283 Mugen Seiki 50T 1st Gear
€5.65
This is a replacement Mugen 50 Tooth First Gear, and is intended for use with the Mugen MRX4X 1/8 scale on road car.
H0471 Mugen Seiki Rear Body Mount Arm Pin (4)
€4.23
This is a pack of four replacement Mugen Rear Body Mount Arm Pins, and are intended for use with the Mugen MRX5 and MRX4X 1/8 scale on road cars.
E2138 Mugen Seiki 2.5mm Rear Anti-Roll Bar
€10.16
This is an optional Mugen 2.5mm Rear Anti-Roll Bar.
H2210B Mugen Seiki MRX6 Pulley Set
€12.28
Mugen MRX6 Pulley Set. Package includes the replacement plastic pulleys used with the MRX6.
C0702B Mugen Seiki Flywheel Taper Cone
€3.98
These are replacement 3x13.8mm joint pins for Mugen buggies and fits the MBX5 family of buggies.
E0705 Mugen Seiki Flywheel Washer/Spacers (4)
€3.09
This is a set of four replacement Mugen Seiki Flywheel Washer/Spacers, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.
C0751 Mugen Seiki 0.9mm Clutch Spring Set (3)
€4.72
This is a set of stock 0.9mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.
E0717A Mugen Seiki 0.95mm Clutch Spring Set (3)
€7.40
This is a set of optional Mugen 0.95mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on.
E0238 Mugen Seiki 2.5x14.8mm Universal Joint Pin (4)
€5.33
This is a set of four replacement Mugen 2.5x14.8mm Universal Joint Pins, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
E2222 Mugen Seiki Center-Front Drive Shaft (89)
€17.24
This is a replacement Mugen Center-Front Drive Shaft.
C0753A Mugen Seiki 1.10mm 3-Shoe Clutch Spring Set (3)
€4.72
This is a set of stock 1.1mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.
C0801H Mugen Seiki Steering Rack Bushings (2)
€3.81
This is a set of replacement steering rack bushings for the Mugen MBX5 family of buggies. These are the bushings that go into the steering ackerman plate, and connect the ackerman plate to the steering uprights.
H0274 Mugen Seiki 2.5x11.8mm Roller Pin (10)
€4.59
This is a pack of ten replacement Mugen 2.5x11.8mm Roller Pins, and are intended for use with the Mugen MRX4X 1/8 scale on road car.
E2201 Mugen Seiki Differential Case
€8.86
The Mugen Carbon Front Upright Arms offer improved initial steering response, and makes the vehicle more stable through the middle and exit of the corner. They also help to reduce bump steer and make the vehicle more predictable in bumpy conditions.
E2137 Mugen Seiki 2.8mm Front Anti-Roll Bar
€10.16
This is an optional Mugen 2.8mm Front Anti-Roll Bar. This bar is slightly thicker than the standard 2.7mm bar included with the MGT7 and MGT7E.
E2703 Mugen Seiki Clutch Bell
€19.27
Last items in stock
This is a replacement Mugen Clutch Bell.
H0164 Roll Bar: MRX5
€14.80
Last items in stock
H0164 Roll Bar: MRX5
C0708A Mugen Seiki 1.0mm Clutch Spring Set (3)
€4.72
Last items in stock
This is a set of stock 1.0mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.
E2602-1 Mugen Seiki 8x16x5mm NMB Bearing (10)
€41.38
Last items in stock
This is a pack of ten replacement Mugen 8x16x5mm NMB Bearings. Mugen NMB bearings are a higher grade than regular bearings and provide increased performance and durability.
H0282 Mugen Seiki 49T 1st Gear
€5.65
Last items in stock
This is a replacement Mugen 49 Tooth First Gear, and is intended for use with the Mugen MRX4 1/8 scale on road car.
H2716 Mugen Seiki HD Pinion - 2nd Gear (19T)
€13.29
Last items in stock
Mugen HD Pinion gears are an optional upgrade for your MGT7 and MRX6 vehicles developed to improve durability and wear resistance. This 2nd gear pinion is available with a 19, 20 or 21 tooth count. Choose the tooth count from the pull down menu above.
E0718A Mugen Seiki 1.05mm Clutch Spring Set (3)
€7.40
Last items in stock
This is a pack of three optional Mugen 1.05mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on.
C0754 Mugen Seiki Aluminum Clutch Shoes (3)
€23.89
Last items in stock
This is a set of aluminum clutch shoes, and come stock in the Mugen MBX5 and MBX6 buggy kits. These aluminum shoes tend to hit harder than the black or white shoes with little slip
H0287 Mugen Seiki Shoe for 2-Speed Gear Box
€8.66
Last items in stock
This is a replacement Mugen Shoe for 2-Speed Gear Box, and is intended for use with the Mugen MRX4X 1/8 scale on road car.
E0222 Mugen Seiki Front/Rear Driveshaft (2)
€31.14
Last items in stock
This is a set of two Mugen front or rear driveshaft bones, and are intended for use with the Mugen MBX6 1/8 scale buggy.
E2136 Mugen Seiki 2.7mm Front Anti-Roll Bar
€10.53
Last items in stock
This is a replacement Mugen 2.7mm Front Anti-Roll Bar. This bar came included as standard equipment with the MGT7 and MGT7E.
E0520 Mugen Seiki Oil Seal Set (16)
€10.24
Last items in stock
This is a pack of sixteen replacement oil shock seals, that are used to rebuild the shocks. These seals form the seal at the end of the shock body between the shock body and the shock shafts.
H2208 Mugen Seiki 2-Speed Adapter
€13.33
Last items in stock
This is a replacement Mugen 2-Speed Adapter, and is intended for use with the Mugen MRX5.
Mugen Seiki Ackerman Plate (5 Hole)
€12.15
Last items in stock
This is a replacement Mugen Ackerman Plate. This redesigned steering ackerman plate has 5 adjustment holes for maximum steering adjustability.
E2221 Mugen Seiki 2-Speed Center Joint Cup (2)
€14.31
Last items in stock
This is a pack of two replacement Mugen 2-Speed Center Joint Cups, intended for use with the MGT7 Nitro Sedan.
E2704 Mugen Seiki Mod 1 Pinion Gear (18T)
€12.11
Last items in stock
Mugen Mod 1 Pinion Gear. These pinion gears are available in a variety of tooth count options to get the gear ratio of your ECO vehicle dialed for any track condition.
E2601-1 Mugen Seiki 5x10x4mm NMB Bearing (10)
€38.58
Last items in stock
This is a pack of ten optional Mugen 5x10x4mm NMB Bearings. These bearings are intended to be used as clutch bell bearings and are a higher grade than the stock bearings, increasing performance and durability for both on and off-road conditions.
H0281 Mugen Seiki 48T 1st Gear
€5.41
Last items in stock
This is a replacement Mugen 48 Tooth First Gear, and is intended for use with the Mugen MRX4X 1/8 scale on road car.
E2316 Mugen Seiki Servo Saver Spring (Hard)
€3.86
Last items in stock
This is a replacement Mugen Servo Saver Spring. This "Hard" tension spring is the standard spring included with the MGT7 and MGT7E kits.
H2717 Mugen H.D. 2nd Gear Pinion 20T: MRX/GT
€13.50
Last items in stock
Mugen HD Pinion gears are an optional upgrade for your MGT7 and MRX6 vehicles developed to improve durability and wear resistance. This 2nd gear pinion is available with a 19, 20 or 21 tooth count. Choose the tooth count from the pull down menu above.
E2415 Mugen Seiki Front/Rear Body Mount Set
€18.29
Last items in stock
This is a replacement Mugen Body Mount Set. This set includes mounts for use in the front and rear of the vehicle.
E0829 Mugen Seiki Anti-Roll Bar Link (4)
€8.62
Last items in stock
This is a set of four replacement Mugen Anti-Roll Bar Links, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.
H2715 Mugen Seiki HD Pinion - 1st Gear (16T)
€12.56
Last items in stock
Mugen HD Pinion gears are an optional upgrade for your MGT7 and MRX6 vehicles developed to improve durability and wear resistance. This 1st gear pinion is available with a 15 or 16 tooth count. Choose the tooth count from the pull down menu above.
H0288 Mugen Seiki 1st Gear Housing
€36.30
Last items in stock
This is a replacement Mugen First Gear Housing, and is intended for use with the Mugen MRX5 and MRX4X 1/8 scale on road cars.
E0838 Mugen Seiki 52mm Steering Tie Rod Turnbuckle (2)
€10.65
Last items in stock
This is a replacement Mugen Steering Tie Rod Set, intended for use with the Mugen MBX7 and MBX6R 1/8 buggy. These turnbuckles feature a small adjuster hole to tighten or loosen the rods once installed.
E0220 Mugen Seiki Front/Rear Universal Set
€51.83
Last items in stock
This is a set of two Mugen front or rear universal driveshafts, and are intended for use with the Mugen MBX6, MBX7 and MBX8 1/8 scale buggies.
E2204 Mugen Seiki Bevel Gear (13T)
€12.85
Last items in stock
This is a replacement Mugen 13 Tooth Bevel Gear, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. This gear is used in the front and rear gear boxes.
H0864B Mugen Seiki Fuel Tank Cap
€8.66
Last items in stock
This is a replacement Mugen Seiki Fuel Tank Cap. This cap fits the tanks equipped on the MBX, MRX and MTX series of nitro vehicles.
H0608 Mugen Seiki 10x15x4mm Flanged Bearing (2)
€14.67
Last items in stock
This is a set of two replacement Mugen 10x15x4mm Flanged Bearings, and are intended for use with the Mugen MRX5 1/8 on road car.
H2810 Mugen Seiki MBX8 Fuel Cap Silicone O-Ring (4)
€4.39
There are not enough products in stock
This is a pack of four replacement Mugen MBX8 Fuel Cap Silicone O-Rings.