This is a pair of replacement drive shaft boots for the Traxxas Revo and T-Maxx monster trucks. These boots are used to protect the front, center and rear half shaft axles from dirt and debris.
This is a pair of black A Arms for the Traxxas Revo, made by RPM. These arms are for the rear of the truck, and will work on either the left or the right side of the truck. These arms are dyed black.
This is a set of replacement rubber pivot ball caps and dust boots for the Traxxas Revo. These are the dust covers that are used to stop the dirt from entering into the pivot balls for the front and rear uprights, and also includes the threaded inserts that are used to hold the pivot balls in place.
This is a pack of replacement shock rebuild parts for the GTR shocks (either the stock ones or the hard anodized ones). Included are shock bladders, bump stops, shock ends internal shock O-rings and shock pistons. Everything needed to renew two shocks is included, except the shock shafts.
TRAXXAS Gear set, 2-speed close ratio (2nd speed gear 40T, 13T-16T input gears, hardware) 5383
Only Revo & Slayer offer the ability to custom tailor the 2-speed gear ratios for either close or standard ratio gear shifts (wide ratio is stock). The close ratio set reduces the engine’s RPM change between first and second gear for nearly seamless shifting and speed, even in the corners!
The Traxxas shock rebuild kit includes everything that is needed to rebuild two shocks. The package includes silicone o-rings, rubber diaphragms, c-clips and spacers.
Traxxas 32P Heavy Duty Pinion Gear. This is the optional heavy duty, hardened steel pinion. The 32 pitch HD gears are available in a variety of tooth count options. Choose the gear best suited to your application using the pull down menu above. Package includes one pinion gear and one set screw.
Traxxas clutch bells are made from durable steel for long-lasting performance. Use them to adjust your truck's final drive ratio for added tuning benefits.
TRAXXAS Clutch bell (14-tooth) / 5x8x0.5mm fiber washer (2) / 5mm e-clip (requires 5x10x4mm ball bearings part #4609)
This is a replacement stock 38 tooth spur gear for the Traxxas Revo monster truck. This spur gear goes on the gear box to transfer power from the clutch bell on the engine into the transmission case.
This is a replacement wiring harness for Traxxas vehicles that use the EZ-start or EZ-start 2 systems. This is the same as the one that comes with the Traxxas Revo.
The Traxxas iD LiPo Battery Balance Lead Adapter allows customers to connect their Traxxas iD batteries to accessory cell voltage checkers without using the EZ-Peak Live app with EZ-Peak Live chargers
This is a set of replacement rubber pivot ball caps and dust boots for the Traxxas Revo. These are the dust covers that are used to stop the dirt from entering into the pivot balls for the front and rear uprights, and also includes the threaded inserts that are used to hold the pivot balls in place.