€0.00 0

SETUP TOOLS

SETUP TOOLS

There are 31 products.

Sort by:

View

B0514 Mugen Seiki Clutch Adjusting Tool

B0514 Mugen Seiki Clutch Adjusting Tool

€36.60

Last items in stock

This is a Mugen clutch adjusting tool. This tool is used to adjust the clutch spring tension on Centex clutches.

Add to basket View details

MR33 Two Side Ride Height Gauge 2,0 - 6,1mm / 0,1mm Steps MR33-RHG

MR33 Two Side Ride Height Gauge 2,0 - 6,1mm / 0,1mm Steps MR33-RHG

€13.90

Last items in stock

MR33's new double-sided height gauge has a finer measuring range than its predecessor. The gauge ranges from 2.0 - 6.1mm and is divided into 0.1mm increments. The precise adjustment of the chassis height is thus easier than ever before! The height gauge is made of aluminum, black anodized, has silver edges and is provided with a typical MR33 logo!

Add to basket View details

B0541 Mugen Driveshaft Pin Replacement Tool

B0541 Mugen Driveshaft Pin Replacement Tool

€83.20

Last items in stock

This is the Mugen Driveshaft Pin Replacement Tool. This must have tool will press in and remove any 3mm pins from the head of the drive shafts on all Mugen MBX5, MBX6 and MBX7 vehicles.

Add to basket View details

B0543 Clutch Spacing Thickness Gauge (.3, .4, .5, .6, .7 and .8mm)

B0543 Clutch Spacing Thickness Gauge (.3, .4, .5, .6, .7 and .8mm)

€47.20

Last items in stock

This is the Mugen Clutch Spacing Thickness Gauge. This tool features .3, .4, .5, .6, .7 and .8mm blades that will allow you to get a consistent and accurate measurement of the clutch bearing shimming on any brand or clutch type.

Add to basket View details

B0546 Alum Ride Height Gauge for On Road 1/8, 1/10

B0546 Alum Ride Height Gauge for On Road 1/8, 1/10

€50.65

Last items in stock

The Mugen Aluminum On Road Ride Height Gauge is a precision ride height gauge that measures from 3mm to 15mm in 1mm increments.

Add to basket View details

B0547 Alum Ride Height Gauge: Buggy, Truggy, GT

B0547 Alum Ride Height Gauge: Buggy, Truggy, GT

€57.30

Last items in stock

Mugen Seiki Aluminum Off Road Ride Height Gauge B. This ride height gauge is perfect for all off road cars and lets you measure between 18mm to 45mm.

Add to basket View details

MR33 CIRCLE DROOP GAUGE 4.0mm/6.6mm INCL. DROOP BLOCKS MR33-CDG-B

MR33 CIRCLE DROOP GAUGE 4.0mm/6.6mm INCL. DROOP BLOCKS MR33-CDG-B

€28.30

Last items in stock

Add to basket View details

MR33 Circle Droop Gauge 4,0 - 6,6mm

MR33 CIRCLE DROOP GAUGE 4.0mm/6.6mm MR33-CDG

€25.00

Last items in stock

Add to basket View details

HUDY PLASTIC SET-UP BOARD DECAL 282X386MM 1/10 TC - 108360

HUDY PLASTIC SET-UP BOARD DECAL 282X386MM 1/10 TC - 108360

€22.60

There are not enough products in stock

Details

Alu Set-up Wheel for 1/10 Touring Cars (4)

Alu Set-up Wheel for 1/10 Touring Cars (4)

€36.55

There are not enough products in stock

Alu Set-up Wheel for 1/10 Touring Cars (4), 109370.CNC-machined premium-quality aluminum set-up wheels for electric and nitro 1/10 touring cars allows for perfect, precise and repeatable set-up adjustment and tweak correction.

Details

Hudy Alu Multi Tool - Shock Shaft Plier / Ball Joint Tool - BLACK

Hudy Alu Multi Tool - Shock Shaft Plier / Ball Joint Tool - BLACK

€46.90

There are not enough products in stock

Unique Multi Tool, Suitable for all size of RC Cars, planes, boats, drones, Suitable for 1/5, 1/8, 1/10, 1/12, 1/16, 1/18, 1/24, Perfect Tool for Onroad and Offroad Cars.

Details

B0545 Mugen Seiki Pinion Gear Tool

B0545 Mugen Seiki Pinion Gear Tool

€49.40

There are not enough products in stock

The Mugen Pinion Gear Tool is a special tool developed for the installation and removal of the pinion gears from the clutch bell on the Mugen MRX and MGT7 series cars. Precision machined and lightweight, this tool is a must have for any serious racer.

Details

Power Tool Tip Allen 2.0 x 90 mm

Power Tool Tip Allen 2.0 x 90 mm

€11.51

There are not enough products in stock

HUDY offers a range of power tool tips for electric screwdrivers, manufactured from world-renowned HUDY Spring Steel™ and available in most popular sizes.

Details

Tire Sander Pro F1 Wheel Hub Adapter

Tire Sander Pro F1 Wheel Hub Adapter

€37.90

There are not enough products in stock

MuchMore MR-TSPF1 - Formula One - Adapter for Much More Tire Sander.

Details

42236 TRF Wrench For Aluminum Turnbuckles Tamiya

TAMIYA TOOLS TRF WRENCH FOR ALUMINUM TURNBUCKLES 42236

€13.29

There are not enough products in stock

Details

Light Weight Factory Team Setup Board 3 for 1/8 (400x500)

Light Weight Factory Team Setup Board 3 for 1/8 (400x500)

€39.99

There are not enough products in stock

Made with Hard-wood and thin thickness reduces the weight. Board is hard plastic surface covered can be easily cleaned of dirt. Is use on both sides. Hard plastic sticker in the future can be used interchangeably.

Details

Hudy Ride Height Gauge Stepped For 1/10 & 1/12 Pan Cars

Hudy Ride Height Gauge Stepped For 1/10 & 1/12 Pan Cars

€26.90

There are not enough products in stock

Hudy Ride Height Gauge Stepped For 1/10 & 1/12 Pan Cars, 107718.

Details

B0541D Driveshaft Pin Tool Replacement Tip

B0541D Driveshaft Pin Tool Replacement Tip

€10.55

There are not enough products in stock

This is a replacement Mugen Driveshaft Pin Tool Tip, and is intended for use with the Mugen Driveshaft Pin Replacement Tool (MUGB0541).

Details

Light Weight Factory Team Setup Board 3 for 1/8 (400x500)

Light Weight Factory Team Setup Board 3 for 1/10,1/12 (320x420)

€35.99

There are not enough products in stock

Light weight setup board. Made with Hard-wood and thin thickness reduces the weight. Board is hard plastic surface covered can be easily cleaned of dirt. Is use on both sides. Hard plastic sticker in the future can be used interchangeably.

Details

Hudy Simple Chassis Balancing Tool (2)

Hudy Simple Chassis Balancing Tool (2)

€10.91

There are not enough products in stock

Hudy Simple Chassis Balancing Tool (2), 107880. Simple tool designed to optimize chassis balance.

Details

B0542 Mugen Seiki Pinion Gear Tool

B0542 Mugen Seiki Pinion Gear Tool

€46.10

There are not enough products in stock

This is an optional Mugen Pinion Gear Tool, and is intended for use with the Mugen MTX5. This tool makes it easier to change pinions on the MTX5.

Details

Perfect 0.2mm Step Ride Height Guage

Perfect 0.2mm Step Ride Height Guage

€15.90

There are not enough products in stock

Muchmore Racing Perfect 0.2mm Step Ride Height Gauge.

Details

Hudy Flat Set-Up Board For 1/10th Scale Touring Cars

Hudy Flat Set-Up Board For 1/10th Scale Touring Cars

€24.90

There are not enough products in stock

Hudy Flat Set-Up Board For 1/10th Scale Touring Cars, 108201. This is a flat set-up board for 1/10th touring cars from Hudy.

Details

Hard Chrome Turnbuckle Wrench 4.0mm Purple

Hard Chrome Turnbuckle Wrench 4.0mm Purple

€11.90

There are not enough products in stock

Made with hard chrome material that provides hardness and durability, Compatible withe, 4.0mm turnbuckle, Available in Purple color.

Details

Hudy 1/10 Touring Car Set-Up Board (Dark Grey)

Hudy 1/10 Touring Car Set-Up Board (Dark Grey)

€30.90

There are not enough products in stock

Hudy Flat Set-Up Board For 1/10th Scale Touring Cars ( DARK GRAY ), 108201. This is a flat set-up board for 1/10th touring cars from Hudy.

Details

Hard Chrome Turnbuckle Wrench 4.0mm Purple

Hard Chrome Turnbuckle Wrench 4.0mm Blue

€11.90

There are not enough products in stock

Made with hard chrome material that provides hardness and durability, Compatible withe, 4.0mm turnbuckle, Available in BLUE color.

Details

Hudy Universal Exclusive Set-Up System For 1/8 Off-Road Cars

Hudy Universal Exclusive Set-Up System For 1/8 Off-Road Cars

€156.99

There are not enough products in stock

This is the Hudy Universal Set-up System for all 1/8 off-road cars and fits all 1/8 nitro off-road cars, as well as 1/8 GT class on road cars.

Details

Hudy Universal Exclusive Set-Up System For 1/10th Touring Cars

Hudy Universal Exclusive Set-Up System For 1/10th Touring Cars

€149.24

There are not enough products in stock

This is a set-up System for all 1/10 touring cars from Hudy.

Details

B0548 Rebound Stop Gauge (Droop)

B0548 Rebound Stop Gauge (Droop)

€25.20

There are not enough products in stock

The Mugen Seiki Rebound Stop (droop) Gauge features a scale on both sides that will allow you to check the shock length from 90mm to 135mm.

Details

Hudy Aluminum Nut For 1/10 Touring Set-Up System (4)

Hudy Aluminum Nut For 1/10 Touring Set-Up System (4)

€14.56

There are not enough products in stock

This is a set-up System for all 1/10 touring cars from Hudy.

Details

TURN BUCKLE WRENCH 4mm :MTC1

TURN BUCKLE WRENCH 4mm :MTC1

€16.00

There are not enough products in stock

Aluminum turnbuckle and camber adjusting tool. A great tool to make easy fine tune adjustments for both front / rear camber links and steering arm tie-rods. Will fit a 4mm turnbuckle.

Details