Spare for Mugen Seiki MTX6R, MRX6, MBX8WE, MBX8E, MGT7, MBX8T, MBX7R. (2)

€0.00 0

There are 178 products.

Sort by:

View

E2507 Mugen Front Shock Spring 1.5 L70/8.25T (1pr): X8, X8T

E2507 Mugen Front Shock Spring 1.5 L70/8.25T (1pr): X8, X8T

€15.99

Last items in stock

This is an optional Mugen 70mm Front Shock Spring Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. These springs are 70mm in length and are made from 1.5mm wire. This 8.25T spring rate is slightly softer than the 8.0T front springs included with the MBX7.

Add to basket View details

E2157 Mugen 1.2mm MBX8 Graphite Rear Lower Arm Plate (2)

E2157 Mugen 1.2mm MBX8 Graphite Rear Lower Arm Plate (2)

€24.50

Last items in stock

This is a pack of two optional Mugen 1.2mm MBX8 Graphite Rear Lower Arm Plates. These plates attach to the suspension arm to increase stiffness. Mounting hardware not included.

Add to basket View details

Mugen MBX8 REAR LOWER ARM MOUNT R - E2176

Mugen MBX8 REAR LOWER ARM MOUNT R - E2176

€32.10

Last items in stock

Mugen MBX8 REAR LOWER ARM MOUNT R -E2176

Add to basket View details

E0257 Mugen Seiki S5 Silicon O-Ring Set (10)

E0257 Mugen Seiki S5 Silicon O-Ring Set (10)

€7.35

Last items in stock

This is a replacement Mugen S5 Silicon O-Ring Set, and is intended for use with the Mugen MBX family of vehicles.

Add to basket View details

E0175 Mugen Seiki 2.1mm Front Anti Sway Bar

E0175 Mugen Seiki 2.1mm Front Anti Sway Bar

€11.30

Last items in stock

This is a Mugen 2.1mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Add to basket View details

E2158 Mugen MBX8 Graphite Front Upper Steering Plate

E2158 Mugen MBX8 Graphite Front Upper Steering Plate

€27.60

Last items in stock

This is an optional Mugen MBX8 Graphite Front Upper Steering Plate, with two included Servo Saver Spacers and hardware.

Add to basket View details

E0520 Mugen Seiki Oil Seal Set (16)

E0520 Mugen Seiki Oil Seal Set (16)

€12.60

Last items in stock

This is a pack of sixteen replacement oil shock seals, that are used to rebuild the shocks. These seals form the seal at the end of the shock body between the shock body and the shock shafts.

Add to basket View details

E2143 Mugen Seiki MBX8 Center Differential Mount

E2143 Mugen Seiki MBX8 Center Differential Mount

€19.60

Last items in stock

This is a replacement Mugen MBX8 Center Differential Mount. .

Add to basket View details

E2509 Mugen Front Shock Spring 1.5 L70/7.75T (1pr): X8, X8T

E2509 Mugen Front Shock Spring 1.5 L70/7.75T (1pr): X8, X8T

€15.99

Last items in stock

Mugen Seiki 70mm Front Shock Spring Set (Hard - 1.5/7.75T) (2).

Add to basket View details

E0548 Mugen Seiki Damper Mount (4)

E0548 Mugen Seiki Damper Mount (4)

€12.95

Last items in stock

This is a set of four replacement Mugen Damper Mounts, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Add to basket View details

E2144 Mugen MBX8 Front Lower Suspension Arm Set

E2144 Mugen MBX8 Front Lower Suspension Arm Set

€19.60

Last items in stock

This is a replacement Mugen MBX8 Front Lower Suspension Arm Set. This set also includes the plastic arm inserts, but no mounting hardware.

Add to basket View details

E0183 Mugen Seiki Rebound Stop Adjusting Screw

E0183 Mugen Seiki Rebound Stop Adjusting Screw

€7.60

Last items in stock

This is a set of five replacement Mugen Seki rebound stop adjustment screws (droop screws) and are intended for use with the Mugen MBX6T 1/8 Truck.

Add to basket View details

E2234 Mugen Seiki HTD Spur Gear (44T)

E2234 Mugen Seiki HTD Spur Gear (44T)

€44.17

Last items in stock

This is an optional Mugen 44 Tooth Spur Gear for use with the optional HTD (High Traction Diff) Center Differential (MUGE2245).

Add to basket View details

Mugen E2171 Rear Lower Suspension Arms Set MBX8R

Mugen E2171 Rear Lower Suspension Arms Set MBX8R

€21.50

Last items in stock

Add to basket View details

E0601/1A Mugen Seiki 15x21x4mm Bearing (10)

E0601/1A Mugen Seiki 15x21x4mm Bearing (10)

€57.15

Last items in stock

Mugen 15x21x4mm Bearing. Package includes ten rubber shielded bearings.

Add to basket View details

E2602-1 Mugen Seiki 8x16x5mm NMB Bearing (10)

E2602-1 Mugen Seiki 8x16x5mm NMB Bearing (10)

€50.90

Last items in stock

This is a pack of ten replacement Mugen 8x16x5mm NMB Bearings. Mugen NMB bearings are a higher grade than regular bearings and provide increased performance and durability.

Add to basket View details

E0166 Mugen Seiki 2.5mm Front Anti-Roll Bar

E0166 Mugen Seiki 2.5mm Front Anti-Roll Bar

€11.30

Last items in stock

This is a Mugen 2.5mm Front Anti-Roll Bar, and is intended for use with the Mugen MBX6 family of 1/8 scale vehicles.

Add to basket View details

E2145 Mugen MBX8 Rear Lower Suspension Arm Set

E2145 Mugen MBX8 Rear Lower Suspension Arm Set

€16.90

Last items in stock

This is a replacement Mugen MBX8 Rear Lower Suspension Arm Set. This set also includes the plastic arm inserts, but no mounting hardware.

Add to basket View details

E2515 Mugen Front Damper Spring 1.6 L70/9.5T: X8, X8T

E2515 Mugen Front Damper Spring 1.6 L70/9.5T: X8, X8T

€15.99

Last items in stock

Mugen Seiki 70mm Front Shock Spring Set (X Soft - 1.6/9.5T) (2).

Add to basket View details

Mugen Seiki Front Damper Spring (Hard, 75mm, 9.0T) (2)

Mugen Seiki Front Damper Spring (Hard, 75mm, 9.0T) (2)

€11.00

Last items in stock

This is a set of two hard front shock springs from Mugen and are intended for use with the Mugen MBX6. These springs are 75mm in length, and have 9 Turns.

Add to basket View details

E0225 Mugen Seiki Joint Cup

E0225 Mugen Seiki Joint Cup

€13.70

Last items in stock

This is a Mugen joint cup, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Add to basket View details

E2243 Mugen Seiki HTD Differential Washer Set

E2243 Mugen Seiki HTD Differential Washer Set

€10.10

Last items in stock

This is a replacement Mugen HTD Differential Washer Set for use with the HTD (High Traction Diff) Differentials.

Add to basket View details

E0803 Mugen Seiki Fuel Tank Bushing

E0803 Mugen Seiki Fuel Tank Bushing

€3.40

Last items in stock

This is a set of replacement rubber fuel tank bushings for the Mugen MBX buggies and truggies.

Add to basket View details

E0117 Mugen Seiki Titanium Rear Camber Rod (2)

E0117 Mugen Seiki Titanium Rear Camber Rod (2)

€55.25

Last items in stock

This is a set of optional titanium rear camber rods for the Mugen MBX5 buggies. These are lighter and stronger than the stock parts.

Add to basket View details

E0168 Mugen Seiki 2.7mm Rear Anti-Roll Bar

E0168 Mugen Seiki 2.7mm Rear Anti-Roll Bar

€11.40

Last items in stock

This is a Mugen 2.7mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Add to basket View details

E2136 Mugen Seiki 2.7mm Front Anti-Roll Bar

E2136 Mugen Seiki 2.7mm Front Anti-Roll Bar

€12.95

Last items in stock

This is a replacement Mugen 2.7mm Front Anti-Roll Bar. This bar came included as standard equipment with the MGT7 and MGT7E.

Add to basket View details

E0718A Mugen Seiki 1.05mm Clutch Spring Set (3)

E0718A Mugen Seiki 1.05mm Clutch Spring Set (3)

€9.10

Last items in stock

This is a pack of three optional Mugen 1.05mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on.

Add to basket View details

E0170 Mugen Seiki 2.9mm Rear Anti-Roll Bar

E0170 Mugen Seiki 2.9mm Rear Anti-Roll Bar

€11.50

Last items in stock

This is a Mugen 2.9mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Add to basket View details

E0563 Mugen Rear Damper Spring (X Soft, 86mm, 10.75T) (2)

E0563 Mugen Rear Damper Spring (X Soft, 86mm, 10.75T) (2)

€15.55

Last items in stock

This is a set of two extra soft rear shock springs from Mugen. These springs are 86mm in length, and have 10.75 Turns.

Add to basket View details

E-0814 Mugen Seiki Ball Link 7mm

E0814 Mugen Seiki Ball Link 7mm

€5.15

Last items in stock

This is a set of replacement plastic ball ends for the Mugen MBX truggy. These are used for the steering linkage and connect the front hubs to the steering ackerman

Add to basket View details

E0575 Mugen B.Bore Rear Damper Spring Set (Medium - 1.5/8.50T) (2)

E0575 Mugen B.Bore Rear Damper Spring Set (Medium - 1.5/8.50T) (2)

€16.50

Last items in stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Add to basket View details

E2150 Mugen MBX8 Aluminum Front/Rear Lower Arm Mount

E2150 Mugen MBX8 Aluminum Front/Rear Lower Arm Mount

€24.50

Last items in stock

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the rear location

Add to basket View details

E0243 Mugen Seiki Aluminum Joint Cup (2)

E0243 Mugen Seiki Aluminum Joint Cup (2)

€16.50

Last items in stock

This is a set of two optional Mugen aluminum front or rear axle shafts, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Add to basket View details

E2428 Mugen Rear Wing Stay Spacer (+15): X8/E, X8T/E

E2428 Mugen Rear Wing Stay Spacer (+15): X8/E, X8T/E

€14.75

Last items in stock

This is an optional Mugen Rear Wing Stay Spacer for the MBX8 series of Buggies and Truggies.

Add to basket View details

E0172 Mugen Seiki 3.2mm Rear Anti-Roll Bar

E0172 Mugen Seiki 3.2mm Rear Anti-Roll Bar

€11.50

Last items in stock

This is a Mugen 3.2mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Add to basket View details

E2529 Mugen Seiki 16mm Rear Damper Set

E2529 Mugen Seiki 16mm Rear Damper Set

€88.50

Last items in stock

This is a replacement Mugen 16mm Rear Damper Set. This set includes the necessary parts to assemble two complete rear shocks, minus springs. These shocks have been updated to have 3.5mm shock shafts, updated bladders and slim rubber boots.

Add to basket View details

E1068 Mugen Seiki Wing (White)

E1068 Mugen Seiki Wing (White)

€17.40

Last items in stock

This is an optional Mugen Seiki Lightweight High Down Force Wing. This wing is IFMAR legal and designed to provide high downforce, without the high CG's.

Add to basket View details

E2115 Mugen Seiki Front Lower Arm Hinge Pin (2)

E2115 Mugen Seiki Front Lower Arm Hinge Pin (2)

€6.35

Last items in stock

This is a pack of two replacement Mugen Front Lower Arm Hinge Pins, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy.

Add to basket View details

E2152 Mugen Seiki MBX8 Aluminum Rear/Rear Lower Arm Mount

E2152 Mugen Seiki MBX8 Aluminum Rear/Rear Lower Arm Mount

€45.50

Last items in stock

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the rear gearbox, in the rear location.

Add to basket View details

E0240 Mugen 1mm Wide Offset Wheel Hubs

E0240 Mugen 1mm Wide Offset Wheel Hubs

€12.00

Last items in stock

This is a set of two Mugen 1mm wide offset wheel hubs and are intended for use with the Mugen MBX6 1/8 scale buggy.

Add to basket View details

E2218 Mugen Seiki Front Universal Set

E2218 Mugen Seiki Front Universal Set

€62.50

Last items in stock

This is a replacement Mugen Front Universal Set. These redesigned universal drive shafts are for use with the MUGE2129 front uprights and require a 8x16x5mm ball bearing.

Add to basket View details

E2704 Mugen Seiki Mod 1 Pinion Gear (18T)

E2704 Mugen Seiki Mod 1 Pinion Gear (18T)

€14.90

Last items in stock

Mugen Mod 1 Pinion Gear. These pinion gears are available in a variety of tooth count options to get the gear ratio of your ECO vehicle dialed for any track condition.

Add to basket View details

E1069 Mugen Seiki Wing (Yellow)

E1069 Mugen Seiki Wing (Yellow)

€18.05

Last items in stock

This is an optional Mugen Seiki Lightweight High Down Force Wing. This wing is IFMAR legal and designed to provide high downforce, without the high CG's.

Add to basket View details

E2259 Mugen MBX8 ECO HTD Plastic Spur Gear (46T)

E2259 Mugen MBX8 ECO HTD Plastic Spur Gear (46T)

€15.80

Last items in stock

This is a replacement Mugen 46 Tooth MBX8 ECO HTD Plastic Spur Gear.

Add to basket View details

Mugen Seiki Ackerman Plate (5 Hole)

Mugen Seiki Ackerman Plate (5 Hole)

€14.95

Last items in stock

This is a replacement Mugen Ackerman Plate. This redesigned steering ackerman plate has 5 adjustment holes for maximum steering adjustability.

Add to basket View details

E2508 Mugen Front Shock Spring 1.5 L70/8.0T (1pr): X8, X8T

E2508 Mugen Front Shock Spring 1.5 L70/8.0T (1pr): X8, X8T

€15.99

Last items in stock

Mugen Seiki 70mm Front Shock Spring Set (Medium - 1.5/8.0T) (2).

Add to basket View details

E2228 Mugen MBX7R 78.5mm Front Center Universal Driveshaft

E2228 Mugen MBX7R 78.5mm Front Center Universal Driveshaft

€24.89

Last items in stock

The is an optional Mugen Seiki MBX7R 78.5mm Front Universal Driveshaft. .

Add to basket View details

E0578 Mugen Big Bore Rear Damper Spring Set (XX Hard - 1.5/7.75T) (2)

E0578 Mugen Big Bore Rear Damper Spring Set (XX Hard - 1.5/7.75T) (2)

€16.50

Last items in stock

This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.

Add to basket View details

E0164 Mugen Seiki 2.3mm Front Anti-Roll Bar

E0164 Mugen Seiki 2.3mm Front Anti-Roll Bar

€11.30

Last items in stock

This is a Mugen 2.3mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Add to basket View details

Mugen Seiki Big Bore Front Damper Spring Set (Hard - 1.5/7.75T) (2)

E0573 Mugen Seiki Big Bore Front Damper Spring Set (Hard - 1.5/7.75T) (2)

€16.50

Last items in stock

This is an optional Mugen Big Bore Front Damper Spring Set, and is intended for use with the Mugen MBX6, MBX6T and MBX6-E.

Add to basket View details

Showing 51-100 of 178 item(s)