CARTEN Shock spring (1.2X22mm)Blue-Hard
€4.50
VAT included
Active filters
- Availability: In stock
H2124B Mugen Seiki MRX6 Rear Upright (Hard)
€10.05
VAT included
Mugen MRX6 Rear Upright. This is the replacement rear upright, and can be used on the right or left side of the chassis.
E2132 Mugen Front Upper Suspension Arm Set
€13.70
VAT included
These front upper suspension arms have been shortened 1.6mm in length. This will allow the use of the MUGE0161 spacer between the pillar ball and the upper arm. This will allow for the same camber on each side of the buggy.
H0858 Mugen Seiki Plastic Ball Link Ends Short 6mm
€9.95
VAT included
This is a set of replacement plastic ball ends used on all Mugen MBX, MTX and MRX off-road and on-road cars.
XRAY COMPOSITE SUSPENSION ARM FRONT UPPER - V2 - 332130
€8.00
VAT included
XRAY COMPOSITE SUSPENSION ARM FRONT UPPER - V2 - 332130
TAMIYA PARTS M-08 Concept Gears 51621
€3.95
VAT included
TAMIYA PARTS M-08 Concept Gears 51621
IGT8 PARTS CLUTCH SPRINGS SET IGT800402
€7.60
VAT included
E2142 Mugen Seiki MBX8 Gearbox
€17.10
VAT included
This is a replacement Mugen MBX8 Gear Box. This gearbox has been updated to allow you to remove and service the differential without detaching the suspension arm mounts.
C0801H Mugen Seiki Steering Rack Bushings (2)
€4.69
VAT included
This is a set of replacement steering rack bushings for the Mugen MBX5 family of buggies. These are the bushings that go into the steering ackerman plate, and connect the ackerman plate to the steering uprights.
E2707 Mugen Seiki 0.8 Clutch Springs (4)
€5.30
VAT included
This is a pack of four replacement Mugen 0.8 Clutch Springs for use with the optional Mugen 4-Shoe Clutch System.
T2707 Mugen Seiki Clutch Thrust Bearing Stopper
€2.86
VAT included
This is a replacement Mugen Clutch Thrust Bearing Stopper, and is intended for use with the Mugen MTX5 touring car.
E2572 Mugen Seiki Emulsion Damper cap (2)
€29.40
VAT included
This is a pack of two replacement Mugen 16mm Damper Caps.
E2708 Mugen Seiki 0.9 Clutch Springs (4)
€5.30
VAT included
This is a pack of four replacement Mugen 0.9 Clutch Springs for use with the optional Mugen 4-Shoe Clutch System.
A2304 Mugen Seiki MTC1/MTC2 Steering Stopper Collar (3)
€6.75
VAT included
This is a pack of three replacement Mugen MTC1/MTC2 Steering Stopper Collars.
E2409 Mugen Seiki Stone Guard for MBX7/MBX8
€16.80
VAT included
This is a plastic set of side / stone guards. X8/E, X7R/E, X7TR/E, GT7
A2144 Mugen Seiki MTC1 Aluminum Lower Arm Mount (2)
€13.99
VAT included
This is an optional set of Mugen Seiki Aluminum MTC1 Lower Arm Mounts, intended for use with the MTC1 Competition 1/10 Electric Touring Car Kit as a replacement for the stock plastic mounts.
H2235 0.8M 2nd Gear Pinion 24T: MRX6X Mugen Seiki Racing
€18.00
VAT included
H2235 0.8M 2nd Gear Pinion 24T: MRX6X Mugen Seiki Racing
copy of E2711 Mugen Seiki MBX8 Light Weight Clutch Bell (14T)
€7.10
VAT included
This is an optional Mugen 14 Tooth MBX8 Light Weight Clutch Bell. This clutch bell features large cut-outs, reducing weight and improving heat dissipation.
E2816 Mugen Seiki MBX7T Fuel Tank
€22.44
VAT included
This is a replacement Mugen MBX7T Fuel Tank.
A2147F Mugen Seiki Carbon MTC2 Front Lower Arm
€23.00
VAT included
This is a replacement Mugen Carbon MTC2 Front Lower Arm
TAMIYA PARTS F104 Disc Ball Set Steel (8) Balldiff. 51347
€4.70
VAT included
TAMIYA PARTS F104 Disc Ball Set Steel (8) Balldiff. 51347
E2147 Mugen 1.5mm Trailing Front Hub Carrier Set
€13.80
VAT included
This is an optional Mugen Seiki 1.5mm Trailing Front Hub Carrier Set that can be used with CVA (MUGE0221 & MUGE0224) and universal driveshaft on all the MBX family of buggies, trucks, and GT vehicles. Package includes one left and right side, as well as four inserts.
E0167 Mugen Seiki 2.6mm Front Anti-Roll Bar
€11.30
VAT included
This is a Mugen 2.6mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
A2230-B Mugen Seiki Differential Gears (HD) MTC1/MTC2
€12.95
VAT included
This is a new HD differential gears for the MTC1/MTC2. These gears are made from a new material to improve durability and will allow for a smoother differential operation for a longer period of time.
C0753A Mugen Seiki 1.10mm 3-Shoe Clutch Spring Set (3)
€5.81
VAT included
This is a set of stock 1.1mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.
E0813 Mugen Seiki Rear Upper Arm Link
€8.05
VAT included
This is the replacement rear upper arm link assembly ends for the Mugen MBX.
E2302 Mugen Seiki Radio Box
€16.80
VAT included
This is a replacement Mugen Radio Box, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.
Hong Nor-Center CVD Shaft, Front,101.5mm-X3S-11A
€9.50
VAT included
Hong Nor-Center CVD Shaft, Front,101.5mm-X3S-11A
XRAY COMPOSITE UPRIGHT REAR FOR AERO DISC - 333311
€12.50
VAT included
XRAY COMPOSITE UPRIGHT REAR FOR AERO DISC - 333311
XRAY BALL JOINT 4.9MM - OPEN (4) - 303454
€6.50
VAT included
XRAY BALL JOINT 4.9MM - OPEN (4) - 303454
Hong Nor-Center CVD Drive Shaft (Front)95mmGT-X3GT-02A
€10.15
VAT included
Hong Nor-Center CVD Drive Shaft (Front)95mmGT-X3GT-02A
BODY MOUNT EXTENSION SET 5,5MM(4) TAMIYA 54604
€7.40
VAT included
BODY MOUNT EXTENSION SET 5,5MM(4) TAMIYA 54604. Alto desempenho e máxima durabilidade e facíl montagem.
Hong Nor-CVD drive shaft.107.5mm-X3-04A
€25.00
VAT included
Hong Nor-CVD drive shaft.107.5mm-X3-04A
E2136 Mugen Seiki 2.7mm Front Anti-Roll Bar
€12.95
VAT included
Last items in stock
This is a replacement Mugen 2.7mm Front Anti-Roll Bar. This bar came included as standard equipment with the MGT7 and MGT7E.
Hong Nor-Clutch shoe set - 442
€16.45
VAT included
Hong Nor-Clutch shoe set - 442
Hong Nor-2.5 x12.8 Pin-X3-35
€2.40
VAT included
Hong Nor-2.5 x12.8 Pin-X3-35
TAMIYA PARTS BEVEL GEAR SET FO TT-01 51008
€6.30
VAT included
E0718A Mugen Seiki 1.05mm Clutch Spring Set (3)
€9.10
VAT included
Last items in stock
This is a pack of three optional Mugen 1.05mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on.
HongNor-2nd Ball (pin 5x4.8) (2 pcs)-HN-428k
€4.50
VAT included
HongNor-2nd Ball (pin 5x4.8) (2 pcs)-HN-428k
Tamiya Parts M-03/04/05/06 Reinforced Gear Set black 54277
€6.80
VAT included
Tamiya Parts M-03/04/05/06 Reinforced Gear Set black 54277
E2602-1 Mugen Seiki 8x16x5mm NMB Bearing (10)
€50.90
VAT included
Last items in stock
This is a pack of ten replacement Mugen 8x16x5mm NMB Bearings. Mugen NMB bearings are a higher grade than regular bearings and provide increased performance and durability.
Hong Nor -Clutch Gear (1st) 18T- HN-429F
€8.60
VAT included
Hong Nor -Clutch Gear (1st) 18T- HN-429F
IGT8 PARTS CARBON FIBER FRONT BODY POST SUPPORT IGT800F21
€18.75
VAT included
H2722 Clutch Shoe H.D. (V2)
€23.20
VAT included
Mugen MRX6 Clutch Shoe. Package includes one yellow centax clutch shoe.
E2260 Mugen Seiki MBX8 Center Joint Cup
€12.90
VAT included
This is an optional Mugen MBX8 Center Joint Cup.
H2105 Mugen Seiki Front Lower Arm Hinge Pin Set (2)
€7.05
VAT included
This is a replacement Mugen Front Lower Arm Hinge Pin Set, and is intended for use with the Mugen MRX5.
CARTEN Front Hub Carrier L/R
€5.50
VAT included
Hong Nor-Front C Hub- HN-X1-36
€4.70
VAT included
Hong Nor-Front C Hub- HN-X1-36
T2119-B Mugen B Rear Lower Suspension Arm L/R (Hard): MTX6R
€10.80
VAT included
T2119- Mugen B Rear Lower Suspension Arm L/R (Hard): MTX6R.
E0170 Mugen Seiki 2.9mm Rear Anti-Roll Bar
€11.50
VAT included
Last items in stock
This is a Mugen 2.9mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.