E0522 MUGEN SEIKI FRONT DAMPER STAY 5MM MBX5T
€52.15
VAT included
Active filters
E2572 Mugen Seiki Emulsion Damper cap (2)
€29.40
VAT included
This is a pack of two replacement Mugen 16mm Damper Caps.
T2157B Aluminum Front Upper Arm Mount (L/R) 2pcs MTX7
€8.55
VAT included
T2157B Aluminum Front Upper Arm Mount (L/R) 2pcs: MTX7.
T2708 Mugen Seiki 1st Gear Pinion (14T)
€19.70
VAT included
This is an optional Mugen 14 Tooth 1st Gear Pinion Gear, and is intended for use with the Mugen MTX5 touring car.
H2165 Front Upper Suspension Arm L/R Mugen MRX-6X
€13.90
VAT included
H2165 Front Upper Suspension Arm L/R Mugen MRX-6X
E2123 Mugen Seiki Steel Kingpin Balls (2)
€21.50
VAT included
This is a pack of two optional Mugen Steel Kingpin Balls. These kingpin balls are heavier than the stock parts, and eliminate the need for arm weights.
H2722 Clutch Shoe H.D. (V2)
€23.20
VAT included
Mugen MRX6 Clutch Shoe. Package includes one yellow centax clutch shoe.
B2169 Mugen MBX8 Aluminum Rear/Front Lower Arm Mount (+2)
€30.10
VAT included
This is an optional Mugen Seiki +2 Aluminum Rear/Front Lower Arm Mount, intended for use with the MBX8 line of vehicles.
H2105 Mugen Seiki Front Lower Arm Hinge Pin Set (2)
€7.05
VAT included
This is a replacement Mugen Front Lower Arm Hinge Pin Set, and is intended for use with the Mugen MRX5.
H2227 Mugen Seiki MRX6 2-Speed Gear Box Shoe
€11.60
VAT included
Mugen MRX6 2-Speed Gear Box Shoe. These are the replacement MRX6 gear box shoes.
E2124 Mugen Seiki Steel Kingpin Ball Adjusting Nut (2)
€12.10
VAT included
This is a pack of two optional Mugen Steel Kingpin Ball Adjusting Nuts. These nuts are heavier than the stock parts, and eliminate the need for arm weights.
E2219 Mugen Seiki Rear Universal Set
€62.50
VAT included
This is a replacement Mugen Rear Universal Set. These redesigned universal drive shafts are must be used with the MUGE2131 uprights and require a 8x16x5mm ball bearing. The length of the drive shaft is 89.5mm.
H2417 MUGEN PARTS FRONT BODY HOLDER SHORT
€20.85
VAT included
E0517 Mugen Seiki Front Shock Shaft (2)
€11.70
VAT included
This is a pack of two replacement front shock shafts for the Mugen MBX7 and MBX5T truggy.
H2241 0.8M 2nd Gear Spur Gear 57T: MRX6X - Mugen Seiki
€7.90
VAT included
H2241 0.8M 2nd Gear Spur Gear 57T: MRX6X - Mugen Seiki
A2428 Mugen Seiki MTC2 ROUND WEIGHT 5g (1PC)
€5.50
VAT included
A2428 Mugen Seiki MTC2 ROUND WEIGHT 5g (1PC)
E0176 Mugen Seiki 2.6mm Rear Anti-Roll Bar
€11.40
VAT included
This is a Mugen 2.6mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
E2707 Mugen Seiki 0.8 Clutch Springs (4)
€5.30
VAT included
This is a pack of four replacement Mugen 0.8 Clutch Springs for use with the optional Mugen 4-Shoe Clutch System.
H2112 Mugen Seiki Front Graphite Upright Arm
€12.05
VAT included
Last items in stock
This is a replacement Mugen Front Graphite Upright Arm, and is intended for use with the Mugen MRX5.
H2229 Mugen Seiki MRX6 2-Speed Gear Box Spring Set
€11.00
VAT included
Last items in stock
Mugen MRX6 2-Speed Gear Box Spring Set. These are the replacement MRX6 2-speed gear box springs.
T2113 Mugen Seiki 2.4mm Rear Anti-Roll Bar
€7.55
VAT included
Last items in stock
This is a replacement Mugen 2.4mm Rear Anti-Roll Bar, and is intended for use with the Mugen MTX5 touring car.
A2209 Mugen Seiki MTC1 Rear Belt
€12.10
VAT included
Last items in stock
This is a replacement Mugen MTC1 Rear Belt.
E0183 Mugen Seiki Rebound Stop Adjusting Screw
€7.60
VAT included
Last items in stock
This is a set of five replacement Mugen Seki rebound stop adjustment screws (droop screws) and are intended for use with the Mugen MBX6T 1/8 Truck.
E2255 Mugen Seiki MBX8 Front/Rear HTD Conical Gear (44T)
€49.37
VAT included
Last items in stock
This is a replacement Mugen 44 Tooth MBX8 HTD Conical Gear. This gear is used in the front and rear differentials of the MBX8 as standard equipment.
H0801A Mugen Seiki Steering Tie Rod (2)
€9.22
VAT included
Last items in stock
This is a pack of two replacement Mugen Steering Tie Rods, and are intended for use with the Mugen MRX5 and MRX4X 1/8 scale on road cars.
T2312 Mugen Seiki Brake Disc
€20.70
VAT included
Last items in stock
This is a replacement Mugen Brake Disc.
C0708A Mugen Seiki 1.0mm Clutch Spring Set (3)
€5.81
VAT included
Last items in stock
This is a set of stock 1.0mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.
T2511 Mugen Front Graphite Shock Tower (Low): MTX6R
€17.15
VAT included
Last items in stock
T2511 Mugen Front Graphite Shock Tower (Low): MTX6R.
E0166 Mugen Seiki 2.5mm Front Anti-Roll Bar
€11.30
VAT included
Last items in stock
This is a Mugen 2.5mm Front Anti-Roll Bar, and is intended for use with the Mugen MBX6 family of 1/8 scale vehicles.
A2147A Mugen Seiki MTC2 Upper Arm Pivot Insert (4)
€23.65
VAT included
Last items in stock
This is a replacement Mugen MTC2 Upper Arm Pivot Insert 4 pcs Silver.
Bypass Shock Case (2) A2538
€26.80
VAT included
Last items in stock
E2509 Mugen Front Shock Spring 1.5 L70/7.75T (1pr): X8, X8T
€15.99
VAT included
Last items in stock
Mugen Seiki 70mm Front Shock Spring Set (Hard - 1.5/7.75T) (2).
H0853 Mugen Seiki 3x11.6mm Roller Pin (10)
€6.50
VAT included
Last items in stock
This is a pack of ten replacement Mugen 3x11.6mm Roller Pins, and are intended for use with the Mugen MRX4X 1/8 scale on road car
T2144 Mugen Seiki 2.0mm Front Anti-Roll Bar
€6.65
VAT included
Last items in stock
This is an optional Mugen Seiki 2.0mm Front Anti-Roll Bar. This bar is lighter than the stock 2.2mm front bar.
E0718A Mugen Seiki 1.05mm Clutch Spring Set (3)
€9.10
VAT included
Last items in stock
This is a pack of three optional Mugen 1.05mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on.
H2516 Front Graphite Shock Tower: MRX6X/6R/6 - MugeN Seiki
€16.05
VAT included
Last items in stock
H2516 Front Graphite Shock Tower: MRX6X/6R/6 - MugeN Seiki
H0282 Mugen Seiki 49T 1st Gear
€6.95
VAT included
Last items in stock
This is a replacement Mugen 49 Tooth First Gear, and is intended for use with the Mugen MRX4 1/8 scale on road car.
H2116 Mugen Seiki Anti-Roll Bar Stopper (2)
€13.90
VAT included
Last items in stock
This is a replacement Mugen Anti-Roll Bar Stopper, and is intended for use with the Mugen MRX5.
T2116 Mugen Seiki Anti-Roll Bar Pivot Ball Set (2)
€4.45
VAT included
Last items in stock
This is a replacement Mugen Anti-Roll Bar Pivot Ball Set, and is intended for use with the Mugen MTX5 touring car.
T2211 Mugen Seiki 2-Speed Adapter
€8.00
VAT included
Last items in stock
This is a replacement Mugen 2-Speed Adapter, and is intended for use with the Mugen MTX5 touring car.
H0164 Roll Bar: MRX5
€18.20
VAT included
Last items in stock
H0164 Roll Bar: MRX5
A2147B Mugen Seiki MTC2 Upper Arm Pivot Insert Nut (4)
€8.35
VAT included
Last items in stock
This is a replacement Mugen MTC2 Upper Arm Pivot Insert Nut 4 pcs Silver
E2515 Mugen Front Damper Spring 1.6 L70/9.5T: X8, X8T
€15.99
VAT included
Last items in stock
Mugen Seiki 70mm Front Shock Spring Set (X Soft - 1.6/9.5T) (2).
H2507 Mugen Seiki Shock Piston (3x1.05mm) (2)
€8.00
VAT included
Last items in stock
Mugen Shock Piston. Package includes two 3x1.05 hole pistons.
T2131 Mugen Seiki Front Upright Upper Plate B Set (2)
€21.50
VAT included
Last items in stock
This is an optional Mugen Front Upright Upper Plate B Set, and is intended for use with the Mugen MTX5. These offer two setup options.
T2722 Mugen Seiki Alum. Clutch Bell: MTX6
€22.40
VAT included
Last items in stock
T2722 Mugen Seiki Alum. Clutch Bell: MTX6.
E0222 Mugen Seiki Front/Rear Driveshaft (2)
€38.30
VAT included
Last items in stock
This is a set of two Mugen front or rear driveshaft bones, and are intended for use with the Mugen MBX6 1/8 scale buggy.
E2301 Mugen Seiki Servo Saver Set
€10.00
VAT included
Last items in stock
This is a replacement Mugen Servo Saver Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.
E2504 Mugen Seiki Shock End Steel Ball (4)
€9.80
VAT included
Last items in stock
This is a pack of four replacement Mugen Shock End Steel Balls, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy. These balls are directional. Be careful about the direction during installation.
T2318 Servo Saver Upper Arm MTX7 Mugen Seiki Racing
€26.80
VAT included
Last items in stock
T2318 Servo Saver Upper Arm MTX7 Mugen Seiki Racing.