CARTEN Hub carrier
€5.50
VAT included
Active filters
- Categories: SPARES
Tamiya Parts M-05Ra F-Parts Upright front/rear 51425
€7.15
VAT included
Tamiya Parts M-05Ra F-Parts Upright front/rear 51425
MUGEN MRX WIRE FOR MUFFLER - H0952
€6.80
VAT included
MUGEN MRX WIRE FOR MUFFLER - H0952
Hong Nor -8mm Lightweight Cap joint for brake- HN-435
€8.60
VAT included
Hong Nor -8mm Lightweight Cap joint for brake- HN-435
KING PIN SET TA-04/TA-05 TAMIYA 50882
€2.77
VAT included
KING PIN SET TA-04/TA-05 TAMIYA 50882. Alto desempenho e máxima durabilidade e facíl montagem.
E2138 Mugen Seiki 2.5mm Rear Anti-Roll Bar
€12.50
VAT included
This is an optional Mugen 2.5mm Rear Anti-Roll Bar.
CARSON PARTS VIRUS 4.0 AXLES REAR (2) 500205957
€12.80
VAT included
IGT8 PARTS 58T SPUR GEAR 2ST FOR IGT800200 TRSNSMISSION IGT800215
€7.65
VAT included
Tamiya Parts M-05 C-Parts (Suspension) 51391
€13.35
VAT included
Tamiya Parts M-05 C-Parts (Suspension) 51391
T0268 Mugen Seiki Front Belt (Rubber) (MTX4)
€11.50
VAT included
This is a replacement rubber front drive belt from Mugen Seiki.
H0858 Mugen Seiki Plastic Ball Link Ends Short 6mm
€9.95
VAT included
This is a set of replacement plastic ball ends used on all Mugen MBX, MTX and MRX off-road and on-road cars.
H2233 0.8M 1st Gear Pinion 19T MRX6X - Mugen Seiki Racing
€16.25
VAT included
H2233 0.8M 1st Gear Pinion 19T: MRX6X - Mugen Seiki Racing
IGT8 PARTS DIFF CAP JOINT ( LIGHTWEIGHT ) IGT800H01
€13.62
VAT included
E2816 Mugen Seiki MBX7T Fuel Tank
€22.44
VAT included
This is a replacement Mugen MBX7T Fuel Tank.
T0269 Mugen Seiki Rear Belt (Rubber) (MTX4)
€12.25
VAT included
This is a replacement rubber front drive belt from Mugen Seiki.
IGT8 PARTS SPUR 50T 1ST GEAR MOD 1 IGT800550
€7.65
VAT included
Hong Nor-CVD Wheel Axle 7075 Alum. (2pcs)-X3S-45
€18.90
VAT included
Hong Nor-CVD Wheel Axle 7075 Alum. (2pcs)-X3S-45
Hong Nor-Center CVD Drive Shaft (Rear) 29.1mm-X3.6-23A
€6.90
VAT included
Hong Nor-Center CVD Drive Shaft (Rear) 29.1mm-X3.6-23A
H2124B Mugen Seiki MRX6 Rear Upright (Hard)
€10.05
VAT included
Mugen MRX6 Rear Upright. This is the replacement rear upright, and can be used on the right or left side of the chassis.
C0702B Mugen Seiki Flywheel Taper Cone
€4.90
VAT included
These are replacement 3x13.8mm joint pins for Mugen buggies and fits the MBX5 family of buggies.
copy of Hong Nor -17mm Self-Lock Wheel Nut/P1.25- HN-394
€10.35
VAT included
Hong Nor -17mm Self-Lock Wheel Nut/P1.25- HN-394
Hong Nor-Clutch-bell Alum. Nickel coated GT-X3GT-61I
€26.90
VAT included
Hong Nor-Clutch-bell Alum. Nickel coated GT-X3GT-61I
E0161 Mugen Seiki Front Track Width Adjustment Spacer (4)
€6.40
VAT included
This is a set of replacement Mugen front track width adjustment spacers, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
T2311 Mugen Seiki Graphite Radio Tray Brace
€11.70
VAT included
This is a replacement Mugen Graphite Radio Tray Brace.
E2719 Mugen Seiki MBX8 Light Weight Clutch Bell (13T)
€22.66
VAT included
E2719 Mugen Seiki MBX8 Light Weight Clutch Bell (13T)
Hong Nor-Shock Ball End-X1-31
€3.90
VAT included
Hong Nor-Shock Ball End-X1-31
Hong Nor - Manifold Seal, Red (2 Pcs) - HN-151
€4.03
VAT included
Hong Nor - Manifold Seal, Red (2 Pcs) - HN-151
T-Work's TG-054 Alum. Exhaust Lock ( 2pcs. )
€5.32
VAT included
T-Work's TG-054 Alum. Exhaust Lock ( 2pcs. )
E2238 MUGEN SEIKI DIFF. GEAR 10T (4)
€8.90
VAT included
C0751 Mugen Seiki 0.9mm Clutch Spring Set (3)
€5.81
VAT included
This is a set of stock 0.9mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.
E2531 Mugen Seiki Rear Damper Shaft (2)
€12.25
VAT included
This is a pack of two replacement Mugen Rear Damper Shafts. These shafts have been updated to be 3.5mm thick.
IGT8 PARTS CLUTCH SPRINGS SET IGT800402
€7.60
VAT included
T2803 Mugen Seiki UNIBALL 1 (4)
€10.90
VAT included
This is a pack of six replacement Mugen Seiki 6mm Aluminum Pivot Balls.
CARTEN Shock shafts
€5.45
VAT included
Hong Nor -Clutch Gear (1st) 17T- HN-429E
€5.80
VAT included
Hong Nor -Clutch Gear (1st) 17T- HN-429E
E2420 Mugen Seiki MBX7R Chassis Weight (40g)
€21.75
VAT included
This is an optional Mugen 40 Gram Chassis Weight. This weight mounts to the back of the front gearbox or in front of the rear gear box on the MBX7R and MBX7TR nitro vehicles.
H2237 0.8M 1st Gear Spur Gear 60T: MRX6X Mugen Seiki Racing
€8.10
VAT included
H2237 0.8M 1st Gear Spur Gear 60T: MRX6X Mugen Seiki Racing
Hong Nor -16mm Shock Spring/Gray/Soft-Truggy- HN-390A
€8.70
VAT included
Hong Nor -16mm Shock Spring/Gray/Soft-Truggy- HN-390A
Hong Nor-Front Shock Shaft - A-67A
€2.80
VAT included
Hong Nor-Front Shock Shaft - A-67A
CARTEN Turnbuckle Set (M3x12 /M3x19)
€6.50
VAT included
E0717A Mugen Seiki 0.95mm Clutch Spring Set (3)
€9.10
VAT included
This is a set of optional Mugen 0.95mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on.
IGT8 PARTS SPUR 46T 2ND GEAR MOD 1 IGT800546
€7.65
VAT included
Hong Nor-Rear Lower Arms L,R-X3-53
€9.90
VAT included
Hong Nor-Rear Lower Arms L,R-X3-53
Hong Nor-REAR DRIVE SHAFT-X3-78
€7.45
VAT included
Hong Nor-REAR DRIVE SHAFT-X3-78
TAMIYA PARTS TT01D/R/E B-Parts Suspension Arm/Body M. 51217
€24.00
VAT included
TAMIYA PARTS TT01D/R/E B-Parts Suspension Arm/Body M. 51217
H2210B Mugen Seiki MRX6 Pulley Set
€15.10
VAT included
Mugen MRX6 Pulley Set. Package includes the replacement plastic pulleys used with the MRX6.
Tamiya Team Hahn Racing MAN TGS Semi-truck Wheels
€11.50
VAT included
Tamiya 51588 On-Road Racing Truck Wheels Front/Rear.
IGT8 PARTS O-RING 10MMX1MM BOTTOM CUP (4PCS) IGT8HF065
€3.28
VAT included
Set of four replacement 10x1mm o-rings for shock bottom cup
Hong Nor-Front CVD Shaft-X3-05A
€25.00
VAT included
Hong Nor-Front CVD Shaft-X3-05A
Hong Nor-7x30.5mm Alum. Post (2 pcs)-X3GT-78D
€3.90
VAT included
Hong Nor-7x30.5mm Alum. Post (2 pcs)-X3GT-78D