E2238 MUGEN SEIKI DIFF. GEAR 10T (4)
€8.90
VAT included
Active filters
IGT8 PARTS BODY MOUNT SET FRONT AND REAR BODY IGT8HA002
€4.45
VAT included
CARTEN Gear box
€9.50
VAT included
H2210B Mugen Seiki MRX6 Pulley Set
€15.10
VAT included
Mugen MRX6 Pulley Set. Package includes the replacement plastic pulleys used with the MRX6.
E0717A Mugen Seiki 0.95mm Clutch Spring Set (3)
€9.10
VAT included
This is a set of optional Mugen 0.95mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on.
E2420 Mugen Seiki MBX7R Chassis Weight (40g)
€21.75
VAT included
This is an optional Mugen 40 Gram Chassis Weight. This weight mounts to the back of the front gearbox or in front of the rear gear box on the MBX7R and MBX7TR nitro vehicles.
Hong Nor-+2mm Wheel Hex Driver-X3S-15
€7.40
VAT included
Hong Nor-+2mm Wheel Hex Driver-X3S-15
E2138 Mugen Seiki 2.5mm Rear Anti-Roll Bar
€12.50
VAT included
This is an optional Mugen 2.5mm Rear Anti-Roll Bar.
Hong Nor-Center CVD Drive Shaft (Rear) 29.1mm-X3.6-23A
€6.90
VAT included
Hong Nor-Center CVD Drive Shaft (Rear) 29.1mm-X3.6-23A
E2717 Mugen Seiki MBX8 Clutch Pins (4-shoe)
€10.69
VAT included
E2717 Mugen Seiki MBX8 Clutch Pins (4-shoe)
C0751 Mugen Seiki 0.9mm Clutch Spring Set (3)
€5.81
VAT included
This is a set of stock 0.9mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.
Hong Nor-Rear Lower Arms L,R-X3-53
€9.90
VAT included
Hong Nor-Rear Lower Arms L,R-X3-53
Hong Nor - Rear Shock Shaft(long) - HN-316A
€2.90
VAT included
Hong Nor - Rear Shock Shaft(long) - HN-316A
Hong Nor -8mm Lightweight Cap joint for brake- HN-435
€8.60
VAT included
Hong Nor -8mm Lightweight Cap joint for brake- HN-435
E2516 Mugen Front Damper Spring 1.6 L70/9.25T: X8, X8T
€15.99
VAT included
Mugen Seiki 70mm Front Shock Spring Set (Soft - 1.6/9.25T) (2).
H2237 0.8M 1st Gear Spur Gear 60T: MRX6X Mugen Seiki Racing
€8.10
VAT included
H2237 0.8M 1st Gear Spur Gear 60T: MRX6X Mugen Seiki Racing
CARTEN Shock shafts
€5.45
VAT included
KING PIN SET TA-04/TA-05 TAMIYA 50882
€2.77
VAT included
KING PIN SET TA-04/TA-05 TAMIYA 50882. Alto desempenho e máxima durabilidade e facíl montagem.
IGT8 PARTS 58T SPUR GEAR 2ST FOR IGT800200 TRSNSMISSION IGT800215
€7.65
VAT included
IGT8 PARTS SPUR 50T 1ST GEAR MOD 1 IGT800550
€7.65
VAT included
Hong Nor-Shock Ball End-X1-31
€3.90
VAT included
Hong Nor-Shock Ball End-X1-31
Hong Nor-Adjustable GT Clutch Flywheel 34mm-X3GT-61A
€14.50
VAT included
Hong Nor-Adjustable GT Clutch Flywheel 34mm-X3GT-61A
Tamiya Parts M-05 Parts (Wheel hub) 51393
€7.05
VAT included
Tamiya Parts M-05 Parts (Wheel hub) 51393
Tamiya TT-01E Urethane Bumper 58407
€4.10
VAT included
Hong Nor-Front CVD Shaft-X3-05A
€25.00
VAT included
Hong Nor-Front CVD Shaft-X3-05A
Hong Nor-150cc Low Profile Fuel Tank-Hub-X3GT-74
€16.50
VAT included
Hong Nor-150cc Low Profile Fuel Tank-Hub-X3GT-74
E0238 Mugen Seiki 2.5x14.8mm Universal Joint Pin (4)
€6.55
VAT included
This is a set of four replacement Mugen 2.5x14.8mm Universal Joint Pins, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
H2239 1st Speed Gear 62T 0.8Mod Mugen MRX-6X
€8.10
VAT included
H2239 1st Speed Gear 62T 0.8Mod Mugen MRX-6X
T2803 Mugen Seiki UNIBALL 1 (4)
€10.90
VAT included
This is a pack of six replacement Mugen Seiki 6mm Aluminum Pivot Balls.
Hong Nor-2.5x11.8 Pin-X3-34
€1.98
VAT included
Hong Nor-7x30.5mm Alum. Post (2 pcs)-X3GT-78D
€3.90
VAT included
Hong Nor-7x30.5mm Alum. Post (2 pcs)-X3GT-78D
Hong Nor -2-Speed light weight shaft- HN-428A
€7.90
VAT included
Hong Nor -2-Speed light weight shaft- HN-428A
H0285B Mugen Seiki MRX6 2nd Gear Spur Gear (46T)
€6.00
VAT included
Mugen MRX6 2nd Gear Spur Gear. Use these gears to fine tune the ratio of your car and dial in your top speed. Choose from 45, 46 (stock), and 47 tooth options.
H2124B Mugen Seiki MRX6 Rear Upright (Hard)
€10.05
VAT included
Mugen MRX6 Rear Upright. This is the replacement rear upright, and can be used on the right or left side of the chassis.
CARSON PARTS VIRUS 4.0 AXLES REAR (2) 500205957
€12.80
VAT included
IGT8 PARTS CLUTCH SPRINGS SET IGT800402
€7.60
VAT included
IGT8 PARTS DIFF CAP JOINT ( LIGHTWEIGHT ) IGT800H01
€13.62
VAT included
Hong Nor-5x16 Bearing (metal cap) (2 pcs)-X3S-37A
€6.90
VAT included
Hong Nor-5x16 Bearing (metal cap) (2 pcs)-X3S-37A
IGT8 PARTS BALL BERING 8X14mm (4pcs) IGT8HE006
€14.60
VAT included
Hong Nor-Steering King Pin-X3-14
€3.80
VAT included
Hong Nor-Steering King Pin-X3-14
Hong Nor-Diff. Case Dust Cover (2 pcs)-X3GT-55
€6.90
VAT included
Hong Nor-Diff. Case Dust Cover (2 pcs)-X3GT-55
H2241 0.8M 2nd Gear Spur Gear 57T: MRX6X - Mugen Seiki
€7.90
VAT included
H2241 0.8M 2nd Gear Spur Gear 57T: MRX6X - Mugen Seiki
TRAXXAS PARTS 32P SPUR GEAR (70T) W/BUSHING 4470
€4.00
VAT included
Replacement part for these models: Nitro Rustler, Nitro Slash and T-Maxx
Hong Nor -1st Spur Gear Holder- HN-428D
€24.70
VAT included
Hong Nor -1st Spur Gear Holder- HN-428D
Hong Nor-Clutch Spring For Adjustable Clutch System (Soft)-X3GT-61G
€5.90
VAT included
Hong Nor-Clutch Spring For Adjustable Clutch System (Soft)-X3GT-61G
Hong Nor-.28 Connecting Rod-CR2106A
€14.60
VAT included
Hong Nor-.28 Connecting Rod-CR2106A
T2708 Mugen Seiki 1st Gear Pinion (14T)
€19.70
VAT included
This is an optional Mugen 14 Tooth 1st Gear Pinion Gear, and is intended for use with the Mugen MTX5 touring car.
IGT8 PARTS SPUR 45T 2ND GEAR MOD 1 IGT800545
€7.65
VAT included
Hong Nor -16mm Shock Spring/White/Soft - HN-389B
€8.70
VAT included
Hong Nor -16mm Shock Spring/White/Soft - HN-389B
Hong Nor-Stabilizer Ball End- HN-A-34B
€1.90
VAT included
Hong Nor-Stabilizer Ball End- HN-A-34B