CARTEN Bumper For Sedan Body
€4.75
VAT included
Active filters
- Availability: In stock
copy of E2711 Mugen Seiki MBX8 Light Weight Clutch Bell (14T)
€7.10
VAT included
This is an optional Mugen 14 Tooth MBX8 Light Weight Clutch Bell. This clutch bell features large cut-outs, reducing weight and improving heat dissipation.
Hong Nor-Clutch Spring For Adjustable Clutch System (Hard)-X3GT-61H
€5.90
VAT included
Hong Nor-Clutch Spring For Adjustable Clutch System (Hard)-X3GT-61H
PS-47 IRIDESCENT PINK GOLD POLICARBONATE SPRAY 100ML TAMIYA
€10.80
VAT included
PS-47 Iridescent Pink Gold Policarbonate Spray 100ml Tamiya These spray paints were especially developed for decorating transparent polycarbonate bodies used in R/C car modeling.
Hong Nor -2.5x11.8mm PIN (round head)- HN-428C
€3.70
VAT included
Hong Nor -2.5x11.8mm PIN (round head)- HN-428C
Mugen MBX8 REAR LOWER ARM MOUNT F -E2175
€27.70
VAT included
Mugen MBX8 REAR LOWER ARM MOUNT F -E2175
PS-46 IRIDESCENT GREEN PURPLE POLICARBONATE SPRAY 100ML TAMIYA
€10.80
VAT included
PS-46 Iridescent Green Purple Policarbonate Spray 100ml Tamiya These spray paints were especially developed for decorating transparent polycarbonate bodies used in R/C car modeling.
E2572 Mugen Seiki Emulsion Damper cap (2)
€29.40
VAT included
This is a pack of two replacement Mugen 16mm Damper Caps.
PS-3 LIGHT BLUE POLICARBONATE SPRAY 100ML TAMIYA
€8.50
VAT included
PS-3 Light Blue Policarbonate Spray 100ml Tamiya These spray paints were especially developed for decorating transparent polycarbonate bodies used in R/C car modeling.
Hong Nor-FUEL TANK-JS-38B
€6.70
VAT included
Hong Nor-FUEL TANK-JS-38B
A2107 Mugen Seiki MTC1 Lower Arm Bushing Set
€8.45
VAT included
This is a replacement Mugen MTC1 Lower Arm Bushing Set, including five pairs of bushings.
E2707 Mugen Seiki 0.8 Clutch Springs (4)
€5.30
VAT included
This is a pack of four replacement Mugen 0.8 Clutch Springs for use with the optional Mugen 4-Shoe Clutch System.
Hong Nor -8x10x1.5mm AL bush- HN-428F
€2.00
VAT included
Hong Nor -8x10x1.5mm AL bush- HN-428F
Hong Nor-Diff. Case (F&R)-X3-43
€5.10
VAT included
Hong Nor-Diff. Case (F&R)-X3-43
CARTEN Front Hub Carrier L/R
€5.50
VAT included
E2172 Mugen MBX8 Rear Hubs Set
€12.45
VAT included
This is a replacement Mugen MBX8 Rear hubs Set. No mounting hardware.
E2708 Mugen Seiki 0.9 Clutch Springs (4)
€5.30
VAT included
This is a pack of four replacement Mugen 0.9 Clutch Springs for use with the optional Mugen 4-Shoe Clutch System.
XRAY COMPOSITE 2-SPEED GEAR 46T (2nd) - H - 345546
€14.50
VAT included
XRAY COMPOSITE 2-SPEED GEAR 46T (2nd) - H - 345546
Hong Nor-Front C Hub- HN-X1-36
€4.70
VAT included
Hong Nor-Front C Hub- HN-X1-36
Hong Nor-Front Lower Arms L,R-X3-45
€9.90
VAT included
Hong Nor-Diff. Case (F&R)-X3-43
CARTEN Ball End (4.8mm)
€5.50
VAT included
E2161 Mugen Front Lower Suspension Arm L/R: X8T, X8TE
€21.50
VAT included
This is a replacement Mugen Front Lower Suspension Arm Set for use with the MBX8T and MBX8TE truggies. This set includes direction left and right side arms, with plastic arm inserts.
E2409 Mugen Seiki Stone Guard for MBX7/MBX8
€16.80
VAT included
This is a plastic set of side / stone guards. X8/E, X7R/E, X7TR/E, GT7
Hong Nor-CNC Aluminum Pinion Gear Mount-X3S-22
€8.65
VAT included
Hong Nor-CNC Aluminum Pinion Gear Mount-X3S-22
Hong Nor -8x12x3.5 Ball Bearing (2 pcs)- HN-428I
€6.20
VAT included
Hong Nor -8x12x3.5 Ball Bearing (2 pcs)- HN-428I
A2601/1 Bearings 3 x 6 x 2.5mm (10pcs): MTC1
€28.46
VAT included
A2601/1 Bearings 3 x 6 x 2.5mm (10pcs): MTC1.
E0718A Mugen Seiki 1.05mm Clutch Spring Set (3)
€9.10
VAT included
Last items in stock
This is a pack of three optional Mugen 1.05mm Clutch Springs. The stiffer the spring, the later the clutch will engage allowing the engine to spool up to a higher RPM range before the clutch comes on.
PNEUS CLAYMORE V2 BUGGY C3 (MEDIUM) WITH INSERT (2 PCS.) PCT2002-C3
€13.50
VAT included
E2602-1 Mugen Seiki 8x16x5mm NMB Bearing (10)
€50.90
VAT included
Last items in stock
This is a pack of ten replacement Mugen 8x16x5mm NMB Bearings. Mugen NMB bearings are a higher grade than regular bearings and provide increased performance and durability.
E2816 Mugen Seiki MBX7T Fuel Tank
€22.44
VAT included
This is a replacement Mugen MBX7T Fuel Tank.
HOT RACE Pneu Bangkok V2 Soft (2) - 001-0123
€12.50
VAT included
HOT RACE Pneu Bangkok V2 Soft (2) - 001-0123
SILICONE WIRE 14 AWG RED (50CM)
€1.77
VAT included
14 AWG RED SILICONE WIRE (50CM)
H2233 0.8M 1st Gear Pinion 19T MRX6X - Mugen Seiki Racing
€16.25
VAT included
H2233 0.8M 1st Gear Pinion 19T: MRX6X - Mugen Seiki Racing
E2531 Mugen Seiki Rear Damper Shaft (2)
€12.25
VAT included
This is a pack of two replacement Mugen Rear Damper Shafts. These shafts have been updated to be 3.5mm thick.
HOT RACE FOAM Buggy (2) - 001-1001
€12.50
VAT included
HOT RACE FOAM Buggy (2) - 001-1001
KING PIN SET TA-04/TA-05 TAMIYA 50882
€2.77
VAT included
KING PIN SET TA-04/TA-05 TAMIYA 50882. Alto desempenho e máxima durabilidade e facíl montagem.
A2158 Mugen Seiki MTC2 Brace Upper Deck
€8.15
VAT included
This is a replacement Mugen MTC2 Brace Upper Deck.
A2811 Mugen Seiki MTC1/MTC2 Shims (3x6x0.5mm) (10)
€12.85
VAT included
A2811 Mugen Shims (3x6x0.5mm) 10pcs: MTC1/MTC2
H2237 0.8M 1st Gear Spur Gear 60T: MRX6X Mugen Seiki Racing
€8.10
VAT included
H2237 0.8M 1st Gear Spur Gear 60T: MRX6X Mugen Seiki Racing
E2260 Mugen Seiki MBX8 Center Joint Cup
€12.90
VAT included
This is an optional Mugen MBX8 Center Joint Cup.
E2136 Mugen Seiki 2.7mm Front Anti-Roll Bar
€12.95
VAT included
Last items in stock
This is a replacement Mugen 2.7mm Front Anti-Roll Bar. This bar came included as standard equipment with the MGT7 and MGT7E.
Schumacher "Mini Pin 1" Pre-Mounted 1/10 Rear Buggy Carpet Tires (2) (Yellow)
€17.80
VAT included
This is a pack of two Schumacher "Mini Pin 1" 1/10 Rear Buggy Tires Pre-mounted on 12mm hex white wheels with medium foam inserts.
BALL BEARING High Speed(Front) .21/.28/.30-O.S.23731000
€18.00
VAT included
BALL BEARING High Speed(Front) .21/.28/.30-O.S.23731000
A2160 Mugen Seiki MTC2 Upper Deck Screw (2)
€5.60
VAT included
This is a replacement Mugen MTC2 Upperdeck Screw (2 pcs). (Used with A2159)
Schumacher Cactus 2.2 Front 1/10 4wd Buggy Pre-Mounted Carpet Tire (2) (Yellow)
€17.30
VAT included
The Schumacher Cactus Pre-Mounted 1/10 4wd Buggy Front Tire has been specially developed for EOS style carpet and offers improved driving feel, faster lap times, and longer life.
H2239 1st Speed Gear 62T 0.8Mod Mugen MRX-6X
€8.10
VAT included
H2239 1st Speed Gear 62T 0.8Mod Mugen MRX-6X
O.S . SPEED Clutch shoe S (B) PL (4 Yellow)
€28.99
VAT included
HOT RACE Pneu Amazzonia Medium (2) - 001-0331
€12.50
VAT included
HOT RACE Pneu Amazzonia Medium (2) - 001-0331
Tamiya Team Hahn Racing MAN TGS Semi-truck Wheels
€11.50
VAT included
Tamiya 51588 On-Road Racing Truck Wheels Front/Rear.
E0601/1A Mugen Seiki 15x21x4mm Bearing (10)
€57.15
VAT included
Last items in stock
Mugen 15x21x4mm Bearing. Package includes ten rubber shielded bearings.