GOLD CONNECTOR EC3 (1) SOCKETS YUKI MODEL AM-623-10F1
€1.00
VAT included
H2121 Mugen Seiki Front Upright
€6.75
VAT included
This is a replacement Mugen Front Upright, and is intended for use with the Mugen MRX5. This upright can be used on either the Right or Left side of the car.
T2114 Mugen Seiki Anti-Roll Bar Stopper Set (2)
€12.65
VAT included
This is a replacement Mugen Anti-Roll Bar Stopper Set, and is intended for use with the Mugen MTX5 touring car.
Hong Nor -Clutch Shoe Carrier- HN-428B
€6.95
VAT included
Hong Nor -Clutch Shoe Carrier- HN-428B
Hiro Seiko Hard Coated Alum. Pinion Gear (MoS2) DP64-46T
€5.99
VAT included
Hiro Seiko Hard Coated Alum. Pinion Gear (MoS2) DP64-46T
B0325 Mugen Super Silicone Oil Shock 500 (50ml)
€10.20
VAT included
Mugen Super Silicone 500 CST shock fluid formulated in Japan with high grade silicones. The bottle has a small pour spout with a screw on top for safe traveling. Bottle contains 50ml (1.7 oz).
A2143 Mugen Seiki MTC1 C-Hub Metal Bushing (4)
€10.35
VAT included
Mugen MTC1 C-Hub Metal Bushings are used with MUGA2141L/R aluminum front c-hub carriers for the MTC1.
copy of Hong Nor -Lightweight Aluminum Ball Set Hard-Coated- HN-398X3
€5.65
VAT included
Hong Nor -Lightweight Aluminum Ball Set Hard-Coated- HN-398X3
M4 NYLON LOCKNUT SET (10 PCS) ULTIMATE
€2.99
VAT included
This is a pack of ten Screws from Ultimate Racing. These are made of 12.9 steel which is the best grade you can use on your RC.
TAMIYA PARTS SPUR GEAR SET SPEED TUNED 55/58T TT-01 - 53665
€11.80
VAT included
PS-44 TRANSLUCENT GREEN POLICARBONATE SPRAY 100ML TAMIYA
€7.79
VAT included
PS-44 Translucent Green Policarbonate Spray 100ml Tamiya These spray paints were especially developed for decorating transparent polycarbonate bodies used in R/C car modeling.
Hong Nor-Diff Cup Joint/2 pcs-X3-77
€7.40
VAT included
Hong Nor-Diff Cup Joint/2 pcs-X3-77
T2127 Mugen Seiki Rear Lower Suspension Shaft Set (2)
€6.70
VAT included
This is a replacement Mugen Rear Lower Suspension Shaft Set, and is intended for use with the Mugen MTX5 touring car.
Hong Nor -56T 2nd Spur Gear- HN-429C
€7.60
VAT included
Hong Nor -56T 2nd Spur Gear- HN-429C
Tamiya Parts M-05Ra F-Parts Upright front/rear 51425
€7.15
VAT included
Tamiya Parts M-05Ra F-Parts Upright front/rear 51425
Hong Nor -24T (2nd) Clutch Gear Modul 0.8- HN-428R
€9.40
VAT included
Hong Nor -24T (2nd) Clutch Gear Modul 0.8- HN-428R
B0753 SJG 3x5 F/H Screw
€9.50
VAT included
This is a pack of ten 3/5mm flat head screws from Mugen Seiki.
E2242 Mugen Seiki HTD S6 Silicon O-Ring (10)
€6.65
VAT included
This is a pack of ten replacement Mugen HTD S6 Silicon O-Rings for use with the HTD (High Traction Diff) Differentials
TAMIYA PARTS FF-03 - 06 SPUR GEAR (68T) 51423
€4.30
VAT included
A2514 Mugen Seiki Shock Ball Joints + Parts: MTC1
€12.95
VAT included
This is a replacement Mugen MTC1 Shock Ball Joint Set. A2514
XRAY HEX SCREW SFH M3x10 - SILVER (10) - 904310
€7.50
VAT included
XRAY HEX SCREW SFH M3x10 - SILVER (10) - 904310
Hong Nor -58T 2nd Spur Gear- HN-429D
€7.40
VAT included
Hong Nor -58T 2nd Spur Gear- HN-429D
H0515 Mugen 1.8mm Front Damper Springs (Yellow) (2)
€14.40
VAT included
This is a set of two optional Mugen Seiki 1.8mm Front Damper Springs, and are intended for use with the Mugen MRX5 and MRX4 line of 1/8 scale on road cars.
ROBITRONIC CA AKTIVATOR L-305
€7.60
VAT included
ROBITRONIC CA AKTIVATOR L-305
SHOCK OIL SILICONE 8000 CPS (2OZ) ULTIMATE
€4.98
VAT included
This is a 60ml bottle of Ultimate Racing 8000 cSt silicone shock oil used with oil filled shocks.
PS-32 CORSA GREY TAMIYA POLICARBONATE SPRAY 100ml 86032
€8.50
VAT included
IGT8 PARTS SPUR 45T 2ND GEAR MOD 1 IGT800545
€7.65
VAT included
Mugen Seiki MTC2R 1/10 Electric Touring Car Kit (Carbon Chassis)
€680.00
VAT included
Mugen Seiki is excited to announce the NEW MTC2R electric touring car kit.
The MTC2R is an evolution of the highly successful MTC2 platform. Ronald Völker won the ETS championship two years in a row with the MTC2 plateform and it’s now time to release the next generation MTC2R with several updates and improvements. Ronald and the team tested on different carpet and tarmac surfaces to develop the MTC2R.
Hiro Seiko Hard Coated Alum. Pinion Gear (MoS2) DP64-43T
€5.98
VAT included
Hiro Seiko Hard Coated Alum. Pinion Gear (MoS2) DP64-43T
XRAY MICRO CABLE WITH FASTON CONNECTOR (SET) - 389131
€8.50
VAT included
H2105 Mugen Seiki Front Lower Arm Hinge Pin Set (2)
€7.05
VAT included
This is a replacement Mugen Front Lower Arm Hinge Pin Set, and is intended for use with the Mugen MRX5.
B0430 MUGEN SEIKI SERVO HORN MOUNTS FOR B0429
€5.95
VAT included
CARTEN Hub carrier
€5.50
VAT included
Hong Nor-Rear Lower Arms L&R (Hard)-X3-53H
€13.90
VAT included
Hong Nor-Rear Lower Arms L&R (Hard)-X3-53H
1up Racing LowPro Bullet Plugs 4mm (2pcs) - 190405
€3.20
VAT included
1up Racing LowPro Bullet Plugs 4mm (2pcs) - 190405
E2143 Mugen Seiki MBX8 Center Differential Mount
€19.60
VAT included
Last items in stock
This is a replacement Mugen MBX8 Center Differential Mount. .
E0257 Mugen Seiki S5 Silicon O-Ring Set (10)
€7.35
VAT included
Last items in stock
This is a replacement Mugen S5 Silicon O-Ring Set, and is intended for use with the Mugen MBX family of vehicles.
E0183 Mugen Seiki Rebound Stop Adjusting Screw
€7.60
VAT included
Last items in stock
This is a set of five replacement Mugen Seki rebound stop adjustment screws (droop screws) and are intended for use with the Mugen MBX6T 1/8 Truck.
E0814 Mugen Seiki Ball Link 7mm
€5.15
VAT included
Last items in stock
This is a set of replacement plastic ball ends for the Mugen MBX truggy. These are used for the steering linkage and connect the front hubs to the steering ackerman
E0243 Mugen Seiki Aluminum Joint Cup (2)
€16.50
VAT included
Last items in stock
This is a set of two optional Mugen aluminum front or rear axle shafts, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
E2515 Mugen Front Damper Spring 1.6 L70/9.5T: X8, X8T
€15.99
VAT included
Last items in stock
Mugen Seiki 70mm Front Shock Spring Set (X Soft - 1.6/9.5T) (2).
E0319 Mugen Seiki Brake Pad (4)
€41.20
VAT included
Last items in stock
This is a set of four replacement Mugen Brake Pads, and are intended for use with the Mugen MBX6 family of 1/8 scale vehicles.
E0170 Mugen Seiki 2.9mm Rear Anti-Roll Bar
€11.50
VAT included
Last items in stock
This is a Mugen 2.9mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
E0225 Mugen Seiki Joint Cup
€13.70
VAT included
Last items in stock
This is a Mugen joint cup, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
E2150 Mugen MBX8 Aluminum Front/Rear Lower Arm Mount
€24.50
VAT included
Last items in stock
This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the rear location
Mugen Seiki Front Damper Spring (Hard, 75mm, 9.0T) (2)
€11.00
VAT included
Last items in stock
This is a set of two hard front shock springs from Mugen and are intended for use with the Mugen MBX6. These springs are 75mm in length, and have 9 Turns.
E0575 Mugen B.Bore Rear Damper Spring Set (Medium - 1.5/8.50T) (2)
€16.50
VAT included
Last items in stock
This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.
E0576 Mugen Big Bore Rear Damper Spring Set (Hard - 1.5/8.25T) (2)
€16.50
VAT included
Last items in stock
This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.
E0175 Mugen Seiki 2.1mm Front Anti Sway Bar
€11.30
VAT included
Last items in stock
This is a Mugen 2.1mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
OSSP CLUTCH SPRING 0.90(B) SOFT (4PCS)
€4.21
VAT included