OS Speed R21GT Built-up Parts
€162.72
VAT included
XRAY XCA ALU 7075 T6 HARD COATED PINION GEAR - 16T (1ST) - 348516
€19.50
VAT included
Last items in stock
XRAY XCA ALU 7075 T6 HARD COATED PINION GEAR - 16T (1ST) - 348516
Hong Nor -Clutch Spring 1.1mm- HN-436G
€3.00
VAT included
Last items in stock
Hong Nor -Clutch Spring 1.1mm- HN-436G
Hong Nor-13T Pinion Gear-X3-02
€12.00
VAT included
Last items in stock
Hong Nor-13T Pinion Gear-X3-02
Hong Nor-Front,Rear Bumper-X3-82
€9.95
VAT included
Last items in stock
Hong Nor-Front,Rear Bumper-X3-82
Hong Nor-Carbon Fiber Ackerman (B)-X3S-39
€7.45
VAT included
Last items in stock
Hong Nor-Carbon Fiber Ackerman (B)-X3S-39
Tamiya Parts XV-01 K Parts (Steering Arm) 50518
€9.35
VAT included
Last items in stock
Tamiya Parts XV-01 K Parts (Steering Arm) 50518
E2530 Mugen Seiki AS-018 O-Ring (10)
€9.10
VAT included
Last items in stock
This is a pack of ten replacement Mugen AS-018 O-Rings.
R1 LCG ESC Program Wire 40004
€4.99
VAT included
Last items in stock
40004 R1 LCG ESC Program Wire
O.S. Joint Spring T-2040 72106042
€9.12
VAT included
Last items in stock
72106042 O.S. Joint Spring T-2040
M3X8MM SET SCREWS (10 PCS) ULTIMATE
€2.99
VAT included
Last items in stock
This is a pack of ten Screws from Ultimate Racing. These are made of 12.9 steel which is the best grade you can use on your RC.
TAMIYA PARTS FF-03 - 06 SPUR GEAR (68T) 51423
€4.30
VAT included
Last items in stock
Hobbywing XeRun Justock 3650SD G2.1 Motor, 13.5T Sensored Brushless Motor - 30408010
€71.90
VAT included
Last items in stock
Hobbywing Xerun Justock 13 Turn G2.1 Motor Sensored 2800kV for 1:10 Stock
RPM PARTS TRAXXAS REVO REAR LEFT/RIGHT A-ARMS 80192
€10.80
VAT included
Last items in stock
This is a pair of black A Arms for the Traxxas Revo, made by RPM. These arms are for the rear of the truck, and will work on either the left or the right side of the truck. These arms are dyed black.
CARTEN Gear Diff Case
€4.50
VAT included
Last items in stock
E2716 Mugen Seiki MBX8 Clutch Pins (4-shoe)
€14.00
VAT included
Last items in stock
E2716 Mugen Seiki MBX8 Clutch Pins (4-shoe)
PLASTIC CA APPLICATOR TIPS (5PCS)
€3.00
VAT included
This is a pack of five Ultimate Plastic CA Applicator Tips. The Ultimate Plastic Applicator Tips fits into the majority of RC tire glue bottle tops and are used to assist in easier application
HEAT SHRINK TUBING 3MM. (50CM)
€1.77
VAT included
Last items in stock
3MM. HEAT SHRINK TUBING (50CM)
XRAY T4 SHOCK ABSORBER MEMBRANE (4) - 308082
€12.00
VAT included
Last items in stock
XRAY T4 SHOCK ABSORBER MEMBRANE (4) - 308082
XRAY COMPOSITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4) - 374930
€21.00
VAT included
Last items in stock
XRAY COMPOSITE GEAR DIFF BEVEL & SATELLITE GEARS (2+4) - 374930
B0712 Mugen Seiki 2.6mm Nylon Nut
€10.95
VAT included
Last items in stock
This is a pack of ten replacement 2.6mm nylon lock nuts from Mugen Seiki.
Hong Nor-Brake Cap Joint- HN-X1-15
€5.50
VAT included
Last items in stock
Hong Nor-Brake Cap Joint- HN-X1-15
Hong Nor-7x12mm Ball & Socket-X3-32
€3.75
VAT included
Last items in stock
Hong Nor-7x12mm Ball & Socket-X3-32
Hong Nor-Plastic Shock Parts Set-XT-22
€3.90
VAT included
Last items in stock
Hong Hong Nor-Plastic Shock Parts Set-XT-22
Hong Nor-Diff Case-X1-38
€3.90
VAT included
Last items in stock
Hong Nor-Diff Case-X1-38
TAMIYA PARTS TT-02 Aluminium Propeller Shaft 54501
€7.45
VAT included
Last items in stock
TAMIYA PARTS TT-02 Aluminium Propeller Shaft 54501
Hong Nor -Clutch Bell (2nd)- HN-428H
€16.30
VAT included
Last items in stock
Hong Nor -Clutch Bell (2nd)- HN-428H
Hong Nor-New FRONT Anti-roll Bar 2,8mm-X3S-54-2.8
€4.90
VAT included
Last items in stock
Hong Nor-New FRONT Anti-roll Bar 2,8mm-X3S-54-2.8
MR33 2S XT60 All-Black Charging Lead 300mm (4/5mm Dual Plug - XH)
€16.00
VAT included
Last items in stock
MR33 2S XT60 All-Black Charging Lead 300mm (4/5mm Dual Plug - XH)
E0164 Mugen Seiki 2.3mm Front Anti-Roll Bar
€11.30
VAT included
Last items in stock
This is a Mugen 2.3mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
IGT8 PARTS 18T PINION GEAR 1ST FOR IGT800200 TRSNSMISSION IGT800223
€8.95
VAT included
Last items in stock
CARSON PARTS VIRUS 4.0 FRONT BUMPER 500205942
€7.70
VAT included
Last items in stock
SANWA RX-482 RECEIVER CASE SET 107A41302A
€7.50
VAT included
Last items in stock
This is a replacement Sanwa Receiver Case Set for the RX-482 Receiver.
SEPERATE SUSPENSION MOUNT 1A-1XA TAMIYA 54172
€23.48
VAT included
Last items in stock
SEPERATE SUSPENSION MOUNT 1A-1XA TAMIYA 5417. Alto desempenho e máxima durabilidade e facíl montagem.
LEXAN SCISSORS (CURVED)
€9.50
VAT included
Last items in stock
These are the UR Curved Lexan Scissors. These scissors have a small curve to the blade making it much easier to cut around complex curves in your lexan car bodies.
XRAY HIGH-PERFORMANCE LOW FRICTION KEVLAR DRIVE BELT FRONT 3 x 513 MM - 305434
€24.50
VAT included
Last items in stock
XRAY HIGH-PERFORMANCE LOW FRICTION KEVLAR DRIVE BELT FRONT 3 x 513 MM - 305434
XRAY PIVOT BALL UNIVERSAL 5.8 MM WITH HEX (4) - 333240
€17.00
VAT included
Last items in stock
XRAY PIVOT BALL UNIVERSAL 5.8 MM WITH HEX (4) - 333240
A2117 Mugen Seiki MTC1 Front Aluminum Caster Block
€17.90
VAT included
Last items in stock
This is a replacement Mugen MTC1 Front Aluminum Caster Block.
FP2130 Mugen Seiki MBX8 Decal Sheet (2 sheets)
€9.81
VAT included
Last items in stock
This is the Mugen MBX8 Die-Cut decal sheet. There are 2 sheets included with 8 decals per sheet. MBX8 decal size is 100mm x 29mm. A total of 16 decals.
TAMIYA PARTS M-07 Concept Rein. C Pts (2) 54810
€9.75
VAT included
Last items in stock
TAMIYA PARTS M-07 Concept Rein. C Pts (2) 54810
Hong Nor-Screw Bag Set for X3GTS 2023-X3GT-76
€22.90
VAT included
Last items in stock
Hong Nor-Screw Bag Set for X3GTS 2023-X3GT-76
T-Work's TO-321-BK 1/10 Light Weight Aluminium Wing Washer Screw 2 pcs.
€11.19
VAT included
Last items in stock
T-Work's TO-321-B 1/10 Light Weight Aluminium Wing Washer Screw 2 pcs.
E2419 Mugen Seiki MBX7R/X7TR Chassis Weight (20G)
€21.75
VAT included
Last items in stock
The Mugen Seiki X7R/X7TR Chassis Weight can be mounted to the back of the front gear box, or to the front of the rear gear box.
Front Shock Tower & Ext for GT 2019
€49.90
VAT included
Last items in stock
Front Shock Tower & Ext 2019
copy of O.S. SPEED MT03 Exhaust Manifold Assembly 1/10 72106550
€49.30
VAT included
Last items in stock
MR03-WC exhaust manifold is newly developed for 1/8 on-road use.It is an exhaust manifold used by Shoki Takahata who won the 1/8 on-road racing world championship in 2019.The outer appearance is laser-processed with the crown mark and MR03 characters.As a result, a variation for on-road has been added to the lineup *MR01, MR02, MR03-WC.* MR01 is no longer available as stock
Difference from exhaust manifold MR02MR02 is specialized in the low speed rangeMR03(WC) is designed so that it can be connected smoothly from low speed to high speed and is easy to handle. At the World Championship, it was a combination with TR01 EFRA2098 (T-2080), but the combination with TR02 released recently is also recommended since it gives you a different feeling.
ULTIMATE RACING INSERT BANDS (50PCS)
€7.95
VAT included
Last items in stock
copy of Silverback 5mm to 4mm Ultra Low Resistance Adaptor (Gold) 2pcs. (Low Profile Version)
€4.20
VAT included
Last items in stock
Silverback 5mm to 4mm Ultra Low Resistance Adaptor (Gold) 2pcs.
DEAN MALE PLUG (4PCS)
€2.32
VAT included
Last items in stock
DEAN MALE PLUG (4PCS)
XRAY COMPOSITE SUSPENSION ARM FOR SET SCREW - FRONT UPPER - SOFT - 332134
€11.00
VAT included
Last items in stock
XRAY COMPOSITE SUSPENSION ARM FOR SET SCREW - FRONT UPPER - SOFT - 332134
XRAY COMPOSITE BELT PULLEY 26T - MID-SIDE - 335886
€6.00
VAT included
Last items in stock
XRAY COMPOSITE BELT PULLEY 26T - MID-SIDE - 335886