GOLD CONNECTOR DEANS ULTRA PLUG WHIT INSULATING CAP (1) AM-616-10F1
€0.70
VAT included
GOLD CONNECTOR DEANS ULTRA PLUG WITH INSULATING CAP (1) AM-616-10M(1)
€0.70
VAT included
XRAY ALU ANTI-ROLL BAR COLLAR (2) - 303440
€6.50
VAT included
XRAY ALU ANTI-ROLL BAR COLLAR (2) - 303440
J-TECH-1:8 ON ROAD REAR TIRES SH.35 GOLD-JTP01835G
€13.25
VAT included
J-TECH-1:8 ON ROAD REAR TIRES SH.35 GOLD-JTP01835G
J-TECH-1:8 ON ROAD FRONT TIRES SH.32 GOLD-JTA01832G
€11.75
VAT included
J-TECH-1:8 ON ROAD FRONT TIRES SH.32 GOLD-JTA01832G
E2147 Mugen 1.5mm Trailing Front Hub Carrier Set
€13.80
VAT included
This is an optional Mugen Seiki 1.5mm Trailing Front Hub Carrier Set that can be used with CVA (MUGE0221 & MUGE0224) and universal driveshaft on all the MBX family of buggies, trucks, and GT vehicles. Package includes one left and right side, as well as four inserts.
Hong Nor-16mm Shock Spring-Ø2.2 35mm-X3GT-09S
€18.70
VAT included
Hong Nor-16mm Shock Spring-Ø2.2 35mm-X3GT-09S
XRAY BALL JOINT 4.9MM - OPEN (4) - 303454
€6.50
VAT included
XRAY BALL JOINT 4.9MM - OPEN (4) - 303454
D0807 Mugen Seiki Body Pin (8)
€4.90
VAT included
This is a pack of eight replacement body clips from Mugen Seiki.
Tamiya Parts M-03/04/05/06 Reinforced Gear Set black 54277
€6.80
VAT included
Tamiya Parts M-03/04/05/06 Reinforced Gear Set black 54277
PS-61 METALIC ORANGE POLICARBONATE SPRAY 100ML TAMIYA 86061
€9.50
VAT included
Ultra High Speed Motor Cooling Fan 40mm
€11.61
VAT included
WTF 40mm motor cooling fan features a 7 short blades with larger brushless motor coil. Which allow higher torque to push the blade to the very high speed range of 14,000-15,000 RPM @ 8.4V.
O.S. R5 Short Body Standard Glow Plug "Medium"
€7.50
VAT included
This is an O.S. R5 "Medium" Heat Range, Short Body Standard Glow Plug. O.S. glow plugs are designed for high nitro fuels (25% +), and increased durability at high RPM, as well as extreme temperatures.
BODY MOUNT EXTENSION SET 5,5MM(4) TAMIYA 54604
€7.40
VAT included
BODY MOUNT EXTENSION SET 5,5MM(4) TAMIYA 54604. Alto desempenho e máxima durabilidade e facíl montagem.
Hong Nor-Clutch shoe set - 442
€16.45
VAT included
Hong Nor-Clutch shoe set - 442
Hong Nor-CVD drive shaft.107.5mm-X3-04A
€25.00
VAT included
Hong Nor-CVD drive shaft.107.5mm-X3-04A
E0176 Mugen Seiki 2.6mm Rear Anti-Roll Bar
€11.40
VAT included
This is a Mugen 2.6mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
E0813 Mugen Seiki Rear Upper Arm Link
€8.05
VAT included
This is the replacement rear upper arm link assembly ends for the Mugen MBX.
Hong Nor-Center CVD Shaft, Front,101.5mm-X3S-11A
€9.50
VAT included
Hong Nor-Center CVD Shaft, Front,101.5mm-X3S-11A
E2123 Mugen Seiki Steel Kingpin Balls (2)
€21.50
VAT included
This is a pack of two optional Mugen Steel Kingpin Balls. These kingpin balls are heavier than the stock parts, and eliminate the need for arm weights.
XRAY COMPOSITE UPRIGHT REAR FOR AERO DISC - 333311
€12.50
VAT included
XRAY COMPOSITE UPRIGHT REAR FOR AERO DISC - 333311
Hong Nor-Center CVD Joint Set (Front), 95mm, GT-X3GT-02
€17.80
VAT included
Hong Nor-Center CVD Joint Set (Front), 95mm, GT-X3GT-02
E2124 Mugen Seiki Steel Kingpin Ball Adjusting Nut (2)
€12.10
VAT included
This is a pack of two optional Mugen Steel Kingpin Ball Adjusting Nuts. These nuts are heavier than the stock parts, and eliminate the need for arm weights.
Hong Nor-2.5 x12.8 Pin-X3-35
€2.40
VAT included
Hong Nor-2.5 x12.8 Pin-X3-35
Hong Nor -61T 1st Spur Gear- HN-428O
€7.40
VAT included
Hong Nor -61T 1st Spur Gear- HN-428O
TAMIYA PARTS BEVEL GEAR SET FO TT-01 51008
€6.30
VAT included
ZooRacing Wolverine MAX Touring Car Body - 0.5mm LIGHTWEIGHT
€32.90
VAT included
IGT8 PARTS SPUR 50T 1ST GEAR MOD 1 IGT800550
€7.65
VAT included
H2235 0.8M 2nd Gear Pinion 24T: MRX6X Mugen Seiki Racing
€18.00
VAT included
H2235 0.8M 2nd Gear Pinion 24T: MRX6X Mugen Seiki Racing
IGT8 PARTS CLUTCH SPRINGS SET IGT800402
€7.60
VAT included
A2147F Mugen Seiki Carbon MTC2 Front Lower Arm
€23.00
VAT included
This is a replacement Mugen Carbon MTC2 Front Lower Arm
H0858 Mugen Seiki Plastic Ball Link Ends Short 6mm
€9.95
VAT included
This is a set of replacement plastic ball ends used on all Mugen MBX, MTX and MRX off-road and on-road cars.
T2803 Mugen Seiki UNIBALL 1 (4)
€10.90
VAT included
This is a pack of six replacement Mugen Seiki 6mm Aluminum Pivot Balls.
E2156 Mugen 1mm MBX8 Graphite Rear Lower Arm Plate (2)
€23.60
VAT included
This is a pack of two optional Mugen 1mm MBX8 Graphite Rear Lower Arm Plates. These plates attach to the suspension arm to increase stiffness. Mounting hardware not included.
PNEUS ADDICTIVE V2 BUGGY C2 (SOFT) PRE-MOUNTED YELLOW (2PCS.)PCY2004-C2
€16.50
VAT included
A2230-B Mugen Seiki Differential Gears (HD) MTC1/MTC2
€12.95
VAT included
This is a new HD differential gears for the MTC1/MTC2. These gears are made from a new material to improve durability and will allow for a smoother differential operation for a longer period of time.
H2124B Mugen Seiki MRX6 Rear Upright (Hard)
€10.05
VAT included
Mugen MRX6 Rear Upright. This is the replacement rear upright, and can be used on the right or left side of the chassis.
E2242 Mugen Seiki HTD S6 Silicon O-Ring (10)
€6.65
VAT included
This is a pack of ten replacement Mugen HTD S6 Silicon O-Rings for use with the HTD (High Traction Diff) Differentials
TAMIYA PARTS F104 Disc Ball Set Steel (8) Balldiff. 51347
€4.70
VAT included
TAMIYA PARTS F104 Disc Ball Set Steel (8) Balldiff. 51347
IGT8 PARTS SPUR 46T 2ND GEAR MOD 1 IGT800546
€7.65
VAT included
E2816 Mugen Seiki MBX7T Fuel Tank
€22.44
VAT included
This is a replacement Mugen MBX7T Fuel Tank.
E0238 Mugen Seiki 2.5x14.8mm Universal Joint Pin (4)
€6.55
VAT included
This is a set of four replacement Mugen 2.5x14.8mm Universal Joint Pins, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
A2144 Mugen Seiki MTC1 Aluminum Lower Arm Mount (2)
€13.99
VAT included
This is an optional set of Mugen Seiki Aluminum MTC1 Lower Arm Mounts, intended for use with the MTC1 Competition 1/10 Electric Touring Car Kit as a replacement for the stock plastic mounts.
E2238 MUGEN SEIKI DIFF. GEAR 10T (4)
€8.90
VAT included
E2531 Mugen Seiki Rear Damper Shaft (2)
€12.25
VAT included
This is a pack of two replacement Mugen Rear Damper Shafts. These shafts have been updated to be 3.5mm thick.
T2311 Mugen Seiki Graphite Radio Tray Brace
€11.70
VAT included
This is a replacement Mugen Graphite Radio Tray Brace.
IGT8 PARTS BODY MOUNT SET FRONT AND REAR BODY IGT8HA002
€4.45
VAT included
E0710 Mugen Seiki Aluminum Clutch Shoes (3) (Hard)
€37.60
VAT included
E0710 Mugen Seiki Aluminum Clutch Shoes (3) (Hard)
H2210B Mugen Seiki MRX6 Pulley Set
€15.10
VAT included
Mugen MRX6 Pulley Set. Package includes the replacement plastic pulleys used with the MRX6.
PMT Rally18 GT Tyres Medium Premounted Hard Carbon Wheel
€20.50
VAT included