PS-61 METALIC ORANGE POLICARBONATE SPRAY 100ML TAMIYA 86061
€9.50
VAT included
Active filters
- Availability: In stock
XRAY BALL JOINT 4.9MM - OPEN (4) - 303454
€6.50
VAT included
XRAY BALL JOINT 4.9MM - OPEN (4) - 303454
XRAY COMPOSITE UPRIGHT REAR FOR AERO DISC - 333311
€12.50
VAT included
XRAY COMPOSITE UPRIGHT REAR FOR AERO DISC - 333311
D0807 Mugen Seiki Body Pin (8)
€4.90
VAT included
This is a pack of eight replacement body clips from Mugen Seiki.
Hong Nor-Center CVD Drive Shaft (Front)95mmGT-X3GT-02A
€10.15
VAT included
Hong Nor-Center CVD Drive Shaft (Front)95mmGT-X3GT-02A
E2123 Mugen Seiki Steel Kingpin Balls (2)
€21.50
VAT included
This is a pack of two optional Mugen Steel Kingpin Balls. These kingpin balls are heavier than the stock parts, and eliminate the need for arm weights.
Hong Nor-CVD drive shaft.107.5mm-X3-04A
€25.00
VAT included
Hong Nor-CVD drive shaft.107.5mm-X3-04A
PS-2 RED POLICARBONATE SPRAY 100ML TAMIYA
€9.00
VAT included
PS-02 Red Policarbonate Spray 100ml Tamiya These spray paints were especially developed for decorating transparent polycarbonate bodies used in R/C car modeling.
E2124 Mugen Seiki Steel Kingpin Ball Adjusting Nut (2)
€12.10
VAT included
This is a pack of two optional Mugen Steel Kingpin Ball Adjusting Nuts. These nuts are heavier than the stock parts, and eliminate the need for arm weights.
E0517 Mugen Seiki Front Shock Shaft (2)
€11.70
VAT included
This is a pack of two replacement front shock shafts for the Mugen MBX7 and MBX5T truggy.
Hong Nor-Clutch shoe set - 442
€16.45
VAT included
Hong Nor-Clutch shoe set - 442
E0176 Mugen Seiki 2.6mm Rear Anti-Roll Bar
€11.40
VAT included
This is a Mugen 2.6mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
Hong Nor-2.5 x12.8 Pin-X3-35
€2.40
VAT included
Hong Nor-2.5 x12.8 Pin-X3-35
E2147 Mugen 1.5mm Trailing Front Hub Carrier Set
€13.80
VAT included
This is an optional Mugen Seiki 1.5mm Trailing Front Hub Carrier Set that can be used with CVA (MUGE0221 & MUGE0224) and universal driveshaft on all the MBX family of buggies, trucks, and GT vehicles. Package includes one left and right side, as well as four inserts.
TAMIYA PARTS BEVEL GEAR SET FO TT-01 51008
€6.30
VAT included
IGT8 PARTS CLUTCH SPRINGS SET IGT800402
€7.60
VAT included
H2210B Mugen Seiki MRX6 Pulley Set
€15.10
VAT included
Mugen MRX6 Pulley Set. Package includes the replacement plastic pulleys used with the MRX6.
PMT Rally18 GT Tyres Medium Premounted Hard Carbon Wheel
€20.50
VAT included
A2304 Mugen Seiki MTC1/MTC2 Steering Stopper Collar (3)
€6.75
VAT included
This is a pack of three replacement Mugen MTC1/MTC2 Steering Stopper Collars.
IGT8 PARTS SPUR 46T 2ND GEAR MOD 1 IGT800546
€7.65
VAT included
ULTIMATE RACING COMPAK CLUTCH SPRINGS B10 (3PCS) (1mm) UR0624
€4.59
VAT included
This is a set of 3 replacement long life tempered steel clutch springs for the UR Compak clutch system. These are optional springs that you can use to fine tune the way the clutch engages by using different tension clutch springs.
E2238 MUGEN SEIKI DIFF. GEAR 10T (4)
€8.90
VAT included
E0238 Mugen Seiki 2.5x14.8mm Universal Joint Pin (4)
€6.55
VAT included
This is a set of four replacement Mugen 2.5x14.8mm Universal Joint Pins, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
ZooRacing Wolverine MAX Touring Car Body - 0.5mm LIGHTWEIGHT
€32.90
VAT included
E2156 Mugen 1mm MBX8 Graphite Rear Lower Arm Plate (2)
€23.60
VAT included
This is a pack of two optional Mugen 1mm MBX8 Graphite Rear Lower Arm Plates. These plates attach to the suspension arm to increase stiffness. Mounting hardware not included.
A2144 Mugen Seiki MTC1 Aluminum Lower Arm Mount (2)
€13.99
VAT included
This is an optional set of Mugen Seiki Aluminum MTC1 Lower Arm Mounts, intended for use with the MTC1 Competition 1/10 Electric Touring Car Kit as a replacement for the stock plastic mounts.
IGT8 PARTS BODY MOUNT SET FRONT AND REAR BODY IGT8HA002
€4.45
VAT included
E0710 Mugen Seiki Aluminum Clutch Shoes (3) (Hard)
€37.60
VAT included
E0710 Mugen Seiki Aluminum Clutch Shoes (3) (Hard)
E2712 Mugen Seiki Engine Mount Washer Set (4)
€6.35
VAT included
This is a pack of four replacement Mugen Engine Mount Washers for use with the MBX8 line of nitro vehicles.
H2124B Mugen Seiki MRX6 Rear Upright (Hard)
€10.05
VAT included
Mugen MRX6 Rear Upright. This is the replacement rear upright, and can be used on the right or left side of the chassis.
T2110 Mugen Seiki Front Graphite Upright Arm
€12.98
VAT included
This is a replacement Mugen Front Graphite Upright Arm, and is intended for use with the Mugen MTX5 touring car.
H0858 Mugen Seiki Plastic Ball Link Ends Short 6mm
€9.95
VAT included
This is a set of replacement plastic ball ends used on all Mugen MBX, MTX and MRX off-road and on-road cars.
PNEUS ADDICTIVE V2 BUGGY C2 (SOFT) PRE-MOUNTED YELLOW (2PCS.)PCY2004-C2
€16.50
VAT included
T2311 Mugen Seiki Graphite Radio Tray Brace
€11.70
VAT included
This is a replacement Mugen Graphite Radio Tray Brace.
TAMIYA PARTS F104 Disc Ball Set Steel (8) Balldiff. 51347
€4.70
VAT included
TAMIYA PARTS F104 Disc Ball Set Steel (8) Balldiff. 51347
A2230-B Mugen Seiki Differential Gears (HD) MTC1/MTC2
€12.95
VAT included
This is a new HD differential gears for the MTC1/MTC2. These gears are made from a new material to improve durability and will allow for a smoother differential operation for a longer period of time.
T2803 Mugen Seiki UNIBALL 1 (4)
€10.90
VAT included
This is a pack of six replacement Mugen Seiki 6mm Aluminum Pivot Balls.
E2816 Mugen Seiki MBX7T Fuel Tank
€22.44
VAT included
This is a replacement Mugen MBX7T Fuel Tank.
H2235 0.8M 2nd Gear Pinion 24T: MRX6X Mugen Seiki Racing
€18.00
VAT included
H2235 0.8M 2nd Gear Pinion 24T: MRX6X Mugen Seiki Racing
IGT8 PARTS SPUR 50T 1ST GEAR MOD 1 IGT800550
€7.65
VAT included
FP2151 FP Aluminum One Piece Wing Button: MBX, Associated, Xray
€14.99
VAT included
FP2151 FP Aluminum One Piece Wing Button: MBX, Associated, Xray.
A2147F Mugen Seiki Carbon MTC2 Front Lower Arm
€23.00
VAT included
This is a replacement Mugen Carbon MTC2 Front Lower Arm
A2107 Mugen Seiki MTC1 Lower Arm Bushing Set
€8.45
VAT included
This is a replacement Mugen MTC1 Lower Arm Bushing Set, including five pairs of bushings.
E0167 Mugen Seiki 2.6mm Front Anti-Roll Bar
€11.30
VAT included
This is a Mugen 2.6mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
GOLD CONNECTOR DEANS ULTRA PLUG WITH LAMELLAR STRUCTURE (1) PLUG AM-615-10M
€0.70
VAT included
C0753A Mugen Seiki 1.10mm 3-Shoe Clutch Spring Set (3)
€5.81
VAT included
This is a set of stock 1.1mm clutch springs. This is the most common clutch spring for the Mugen MBX5 buggies.
Hong Nor -8x10x1.5mm AL bush- HN-428F
€2.00
VAT included
Hong Nor -8x10x1.5mm AL bush- HN-428F
Hong Nor-Diff. Case (F&R)-X3-43
€5.10
VAT included
Hong Nor-Diff. Case (F&R)-X3-43
CARTEN Spur Gear 72T
€4.50
VAT included
AV PINION GEAR 20/21 TEETH HARD TAMIYA 50356
€8.50
VAT included
AV PINION GEAR 20/21 TEETH HARD TAMIYA 50356. Alto desempenho e máxima durabilidade e facíl montagem.