TAMIYA PARTS FF-03 - 06 SPUR GEAR (68T) 51423
€4.30
VAT included
A2514 Mugen Seiki Shock Ball Joints + Parts: MTC1
€12.95
VAT included
This is a replacement Mugen MTC1 Shock Ball Joint Set. A2514
CARTEN Hub carrier
€5.50
VAT included
H0515 Mugen 1.8mm Front Damper Springs (Yellow) (2)
€14.40
VAT included
This is a set of two optional Mugen Seiki 1.8mm Front Damper Springs, and are intended for use with the Mugen MRX5 and MRX4 line of 1/8 scale on road cars.
Tamiya Parts M-05 C-Parts (Suspension) 51391
€13.35
VAT included
Tamiya Parts M-05 C-Parts (Suspension) 51391
ROBITRONIC CA AKTIVATOR L-305
€7.60
VAT included
ROBITRONIC CA AKTIVATOR L-305
T2117 Mugen Seiki Anti-Roll Bar Adjusting Nut Set (2)
€10.10
VAT included
This is a replacement Mugen Anti-Roll Bar Adjusting Nut Set, and is intended for use with the Mugen MTX5 touring car.
SHOCK OIL SILICONE 8000 CPS (2OZ) ULTIMATE
€4.98
VAT included
This is a 60ml bottle of Ultimate Racing 8000 cSt silicone shock oil used with oil filled shocks.
M3X12MM CAP HEAD SCREWS (10 PCS) ULTIMATE
€2.99
VAT included
This is a pack of ten Screws from Ultimate Racing. These are made of 12.9 steel which is the best grade you can use on your RC.
PS-32 CORSA GREY TAMIYA POLICARBONATE SPRAY 100ml 86032
€8.50
VAT included
IGT8 PARTS SPUR 45T 2ND GEAR MOD 1 IGT800545
€7.65
VAT included
Hong Nor -Clutch Spring 1.1mm- HN-436G
€3.00
VAT included
Hong Nor -Clutch Spring 1.1mm- HN-436G
Hiro Seiko Hard Coated Alum. Pinion Gear (MoS2) DP64-43T
€5.98
VAT included
Hiro Seiko Hard Coated Alum. Pinion Gear (MoS2) DP64-43T
H2105 Mugen Seiki Front Lower Arm Hinge Pin Set (2)
€7.05
VAT included
This is a replacement Mugen Front Lower Arm Hinge Pin Set, and is intended for use with the Mugen MRX5.
B0430 MUGEN SEIKI SERVO HORN MOUNTS FOR B0429
€5.95
VAT included
CARTEN Universal Shafts M210
€13.00
VAT included
Hong Nor - Front Shock Shaft(short) - HN-315A
€2.90
VAT included
Hong Nor - Front Shock Shaft(short) - HN-315A
1up Racing LowPro Bullet Plugs 4mm (2pcs) - 190405
€3.20
VAT included
1up Racing LowPro Bullet Plugs 4mm (2pcs) - 190405
XRAY BALL-BEARING 13x19x4 RUBBER SEALED - GREASE (2) - 941319
€9.00
VAT included
XRAY BALL-BEARING 13x19x4 RUBBER SEALED - GREASE (2) - 941319
IGT8 PARTS 56T SPUR GEAR 2ST FOR IGT800200 TRSNSMISSION IGT800217
€7.65
VAT included
O.S. 21XZ-B VII Off-Road Competition Buggy Engine
€289.00
VAT included
O.S.SPEED "T1202" developed as the strongest small block engine. A new successor engine appeared in this popular engine which is also active in the 1/10 touring car world championships and the like.
H0526 Mugen Front Shock Springs 1.9 (White) (MRX/MTX) (2)
€14.40
VAT included
This is a set of two optional 1.9 white front shock springs from Mugen Seiki.
T2119-B Mugen B Rear Lower Suspension Arm L/R (Hard): MTX6R
€10.80
VAT included
T2119- Mugen B Rear Lower Suspension Arm L/R (Hard): MTX6R.
T-Work's TO-189-BK 1/10 Light Weight Aluminium Wing Washer 2 pcs.
€8.96
VAT included
T-Work's TO-189-BK 1/10 Light Weight Aluminium Wing Washer 2 pcs.
M3X12MM BUTTON HEAD SCREWS (10 PCS) ULTIMATE
€2.99
VAT included
This is a pack of ten Screws from Ultimate Racing. These are made of 12.9 steel which is the best grade you can use on your RC.
B0333 Mugen Super Silicone Oil Shock 500 (50ml)
€10.20
VAT included
Mugen Super Silicone 500 CST shock fluid formulated in Japan with high grade silicones. The bottle has a small pour spout with a screw on top for safe traveling. Bottle contains 50ml (1.7 oz).
IGT8 PARTS 2.4mm SUSPENSION SPRINGS 16MM GT (2pcs) IGT800F31
€13.99
VAT included
ENGINE NUT SG (1U.) FOR 1/8 SCALE
€3.99
VAT included
This is a replacement clutch nut (SG crankshaft) for the UR0603 standard 3 shoes competition flywheel as well as other 1/8 scale clutches. This nut threads onto the crankshaft to secure the flywheel, clutch assembly.
XRAY X1O-RING 5x1 (10) - 970050
€11.90
VAT included
XRAY X1O-RING 5x1 (10) - 970050
Mugen Seiki SN4 Nylon Locknut (10)
€9.85
VAT included
This is a pack of ten M4 nylon locking nuts from Mugen Seiki.
copy of B0675 Mugen SK 3x16 Set Screw (10)
€4.85
VAT included
This is a pack of ten 3x8mm SK set screws from Mugen Seiki.
B0523-1 Spare Tip for 1.5mm Hex Wrench
€14.50
VAT included
This is a replacement 1.5mm metric hex wrench tip from Mugen Seiki.
E2815 Mugen Seiki Aluminum Throttle Servo Horn
€28.69
VAT included
This is an optional Mugen Seiki Aluminum Throttle Servo Horn. This servo horn is made from high quality A7075 aluminum and provides a more direct brake feel.
FUTABA SERVO EXTENSION (30 CM)
€1.99
VAT included
FUTABA SERVO EXTENSION (30CM)
XT90 CONNECTOR FEMALE (1PCS)
€2.67
VAT included
XT90 CONNECTOR FEMALE (1PCS)
T2707 Mugen Seiki Clutch Thrust Bearing Stopper
€2.86
VAT included
This is a replacement Mugen Clutch Thrust Bearing Stopper, and is intended for use with the Mugen MTX5 touring car.
IGT8 PARTS CARBON FIBER FRONT BODY POST SUPPORT IGT800F21
€18.75
VAT included
Hong Nor -Clutch Gear (2nd) 23T- HN-429H
€8.06
VAT included
Hong Nor -Clutch Gear (2nd) 23T- HN-429H
PS-08 LIGHT GREEN TAMIYA POLICARBONATE SPRAY 100ml 86008
€8.50
VAT included
B0524-1 Spare Tip for 2.0mm Hex Wrench
€14.50
VAT included
This is a replacement 2mm metric hex wrench tip from Mugen Seiki.
XRAY CONE WASHER ST 3x8x0.5 (10) - 963030
€11.50
VAT included
XRAY CONE WASHER ST 3x8x0.5 (10) - 963030
H2722 Clutch Shoe H.D. (V2)
€23.20
VAT included
Mugen MRX6 Clutch Shoe. Package includes one yellow centax clutch shoe.
TORNADO Air filter oil 50 ml - J16030
€4.99
VAT included
TORNADO Air filter oil 50 ml - J16030
T2402-B Mugen Front Bumper And Body Mounts : MTX6R/6/5
€15.90
VAT included
T2402-B Mugen Front Bumper And Body Mounts : MTX6R/6/5.
E0170 Mugen Seiki 2.9mm Rear Anti-Roll Bar
€11.50
VAT included
Last items in stock
This is a Mugen 2.9mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
E0225 Mugen Seiki Joint Cup
€13.70
VAT included
Last items in stock
This is a Mugen joint cup, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.
E2150 Mugen MBX8 Aluminum Front/Rear Lower Arm Mount
€24.50
VAT included
Last items in stock
This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the rear location
Mugen Seiki Front Damper Spring (Hard, 75mm, 9.0T) (2)
€11.00
VAT included
Last items in stock
This is a set of two hard front shock springs from Mugen and are intended for use with the Mugen MBX6. These springs are 75mm in length, and have 9 Turns.
E0575 Mugen B.Bore Rear Damper Spring Set (Medium - 1.5/8.50T) (2)
€16.50
VAT included
Last items in stock
This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.
E0576 Mugen Big Bore Rear Damper Spring Set (Hard - 1.5/8.25T) (2)
€16.50
VAT included
Last items in stock
This is an optional Mugen Big Bore Rear Damper Spring Set, and is intended for use with the Mugen MBX. These springs are made with 1.5mm wire making them slightly lighter than the previous springs, and feature an improved coil design which will make both your buggy and truggy much more stable through bumps and jumps.