CARTEN Battery Holder
€4.00
VAT included
XRAY COMPOSITE BELT PULLEY 25T - MID-SIDE - 335885
€10.00
VAT included
XRAY COMPOSITE BELT PULLEY 25T - MID-SIDE - 335885
B0663 Mugen 3x12mm SG Cap Head Screw
€5.80
VAT included
This is a pack of ten replacement 3x12mm cap head screws from Mugen.
TAMIYA PARTS F104 F-Parts (Susp.front) 51381
€13.20
VAT included
TAMIYA PARTS F104 F-Parts (Susp.front) 51381
AIR FILTER OIL Racing ( Bottle 60ml )
€4.99
VAT included
This is a 60ml bottle of Ultimate Racing Air Filter Oil. This specially-developed, high-quality external air filter oil is easily applied to the air filters of any nitro car.
E0410 Mugen Seiki Front Bumper
€8.45
VAT included
This is a replacement front bumper for the Mugen MBX6 family of buggies. The front bumper is now reinforced.
TAMIYA PARTS TIRE/WHEEL 1/10 CHROME MESH (24MM)(2) SUPER DRIFT 54021
€16.80
VAT included
Last items in stock
GHEA Aluminum Ride Height Gauge (20-30mm)
€17.99
VAT included
GHEA Aluminum Ride Height Gauge (20-30mm)
XRAY COMPOSITE BALL JOINT 4.9MM - OPEN - V2 (8) - 302663
€7.90
VAT included
XRAY COMPOSITE BALL JOINT 4.9MM - OPEN - V2 (8) - 302663
Hong Nor -Clutch Gear (1st) 17T- HN-429E
€5.80
VAT included
Hong Nor -Clutch Gear (1st) 17T- HN-429E
E2201 Mugen Seiki Differential Case
€10.90
VAT included
The Mugen Carbon Front Upright Arms offer improved initial steering response, and makes the vehicle more stable through the middle and exit of the corner. They also help to reduce bump steer and make the vehicle more predictable in bumpy conditions.
E2507 Mugen Front Shock Spring 1.5 L70/8.25T (1pr): X8, X8T
€15.99
VAT included
Last items in stock
This is an optional Mugen 70mm Front Shock Spring Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. These springs are 70mm in length and are made from 1.5mm wire. This 8.25T spring rate is slightly softer than the 8.0T front springs included with the MBX7.
IGT8 PARTS DIFF CAP JOINT ( LIGHTWEIGHT ) IGT800H01
€13.62
VAT included
O.S. ENGINES GASKET CARBURETOR O-RING 29015019
€4.64
VAT included
IGT8 PARTS FRONT BRACE BRIDGE 3.0MM IGT821CF305
€14.82
VAT included
IGT8 2021 Front Brace Bridge 3.0mm
Hong Nor -16mm Shock Spring/Gray/Soft-Truggy- HN-390A
€8.70
VAT included
Hong Nor -16mm Shock Spring/Gray/Soft-Truggy- HN-390A
Hong Nor-Front Shock Shaft - A-67A
€2.80
VAT included
Hong Nor-Front Shock Shaft - A-67A
Intellect IP-584674 - TX Softcase - 3.7V - 6000mAh - 1S LiPo Battery - for SANWA M17
€27.00
VAT included
Intellect IP-584674 - TX Softcase - 3.7V - 6000mAh - 1S LiPo Battery - for SANWA M17
J-TECH-1:8 ON ROAD FRONT TIRES SH.32 GOLD-JTA01832G
€11.75
VAT included
J-TECH-1:8 ON ROAD FRONT TIRES SH.32 GOLD-JTA01832G
O.S. Carburetor Retainer (Speed V-Spec) 23981740
€6.54
VAT included
Last items in stock
This is a replacement carburetor retainer for O.S. 30 VG engines.
M3X12MM CAP HEAD SCREWS (10 PCS) ULTIMATE
€2.99
VAT included
This is a pack of ten Screws from Ultimate Racing. These are made of 12.9 steel which is the best grade you can use on your RC.
E2603-1Mugen Seiki Bearings 6x13x5 (NMB) 10pcs
€50.35
VAT included
E2603-1Mugen Seiki Bearings 6x13x5 (NMB) 10pcs.
IGT8 PARTS GT ROLL BAR IGT8X3RB
€30.43
VAT included
IGT8 PARTS GT ROLL BAR IGT8X3RB
OS SP CLUTCH SHOE (B)AL HARD (4PCS)
€17.92
VAT included
XRAY HIGH-PERFORMANCE DRIVE BELT 3 x 351 MM - 305435
€19.50
VAT included
XRAY HIGH-PERFORMANCE DRIVE BELT 3 x 351 MM - 305435
Hong Nor-Rear Lower Arms L,R-X3-53
€9.90
VAT included
Hong Nor-Rear Lower Arms L,R-X3-53
Hong Nor-REAR DRIVE SHAFT-X3-78
€7.45
VAT included
Hong Nor-REAR DRIVE SHAFT-X3-78
Hong Nor-7x30.5mm Alum. Post (2 pcs)-X3GT-78D
€3.90
VAT included
Hong Nor-7x30.5mm Alum. Post (2 pcs)-X3GT-78D
E2261 Mugen Seiki 84.5mm Center Drive Shaft
€11.50
VAT included
This is the optional Mugen Front Center Dogbone for the MBX8 and MBX8 Eco buggies. The center dogbones will eliminate friction from the stock universal driveshafts.
Hong Nor-CVD Wheel Axle 7075 Alum. (2pcs)-X3S-45
€18.90
VAT included
Hong Nor-CVD Wheel Axle 7075 Alum. (2pcs)-X3S-45
IGT8 PARTS FRONT BRACE BRIDGE 2.0MM IGT821CF205
€12.84
VAT included
IGT8 2021 Front Brace Bridge 2.0mm
TIRE 1/10 FRONT DOUBLE COMPOUND C HARD B. CARBON (2)
€8.50
VAT included
Contact RC J1B73 Tyres 1/10 Front Double Compound B Med Carbon (2pcs).
Hong Nor-Front CVD Shaft-X3-05A
€25.00
VAT included
Hong Nor-Front CVD Shaft-X3-05A
E2252 Mugen Seiki MBX8 Straight Cut Bevel Gear (12T)
€17.10
VAT included
This is an optional Mugen 12 Tooth MBX8 Straight Cut Bevel Gear.
Hong Nor -2-Speed light weight shaft- HN-428A
€7.90
VAT included
Hong Nor -2-Speed light weight shaft- HN-428A
FR548AMU Fast Race Mugen MBX6 / 7 / 7R / 8 shock absorber attachment
€13.00
VAT included
E2158 Mugen MBX8 Graphite Front Upper Steering Plate
€27.60
VAT included
Last items in stock
This is an optional Mugen MBX8 Graphite Front Upper Steering Plate, with two included Servo Saver Spacers and hardware.
Hong Nor-2.5x11.8 Pin-X3-34
€1.98
VAT included
C0754 Mugen Seiki Aluminum Clutch Shoes (3)
€29.38
VAT included
Last items in stock
This is a set of aluminum clutch shoes, and come stock in the Mugen MBX5 and MBX6 buggy kits. These aluminum shoes tend to hit harder than the black or white shoes with little slip
Hong Nor-Clutch-bell Alum. Nickel coated GT-X3GT-61I
€26.90
VAT included
Hong Nor-Clutch-bell Alum. Nickel coated GT-X3GT-61I
E0166 Mugen Seiki 2.5mm Front Anti-Roll Bar
€11.30
VAT included
Last items in stock
This is a Mugen 2.5mm Front Anti-Roll Bar, and is intended for use with the Mugen MBX6 family of 1/8 scale vehicles.
E2301 Mugen Seiki Servo Saver Set
€10.00
VAT included
Last items in stock
This is a replacement Mugen Servo Saver Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy.
Schumacher 1/10 2.2" Front Buggy Foam Tire Inserts (2) (Medium)
€2.10
VAT included
This is a set of two Schumacher Schumacher 1/10 Buggy Medium Density Foam Front Tire Inserts.
H2241 0.8M 2nd Gear Spur Gear 57T: MRX6X - Mugen Seiki
€7.90
VAT included
H2241 0.8M 2nd Gear Spur Gear 57T: MRX6X - Mugen Seiki
XRAY COMPOSITE STEERING BLOCK FOR AERO DISC - LEFT - 332222
€12.00
VAT included
XRAY COMPOSITE STEERING BLOCK FOR AERO DISC - LEFT - 332222
Hong Nor-Bearing 5x10x4- HN-A-47A
€3.20
VAT included
Hong Nor-Bearing 5x10x4- HN-A-47A
T-Work's TG-054 Alum. Exhaust Lock ( 2pcs. )
€5.32
VAT included
T-Work's TG-054 Alum. Exhaust Lock ( 2pcs. )
B0509 Mugen Seiki Setting Driver For Engine
€8.90
VAT included
This is an optional setting driver for your offroad Nitro engine. With the long handle and narrow blade this is the perfect screwdriver for fine tuning your engines performance.
Xtreme Body Wing 1/10 High and Low Down-Force (2pcs)
€16.90
VAT included
Body Wing 1/10 Gp High And Low Down-Force (2Pcs).
XRAY COMPOSITE BUMPER - 301202
€8.90
VAT included
XRAY COMPOSITE BUMPER - 301202